Virtual-work-based optimization design on compliant transmission mechanism for flapping-wing aerial vehicles

This paper presents a method for analyzing and optimizing the design of a compliant transmission mechanism for a flapping-wing aerial vehicle. Its purpose is of minimizing the peak input torque required from a driving motor. In order to maintain the stability of flight, minimizing the peak input torque is necessary. To this purpose, first, a pseudo-rigid-body model was built and a kinematic analysis of the model was carried out. Next, the aerodynamic torque generated by flapping wings was calculated. Then, the input torque required to keep the flight of the vehicle was solved by using the principle of virtual work. The values of the primary attributes at compliant joints (i.e., the torsional stiffness of virtual spring and the initial neutral angular position) were optimized. By comparing to a full rigid-body mechanism, the compliant transmission mechanism with well-optimized parameters can reduce the peak input torque up to 66.0%

Scalability of resonant motor-driven flapping wing propulsion systems

From The Royal Society via Jisc Publications RouterHistory: received 2021-03-16, accepted 2021-08-31, collection 2021-09, pub-electronic 2021-09-22Article version: VoRPublication status: PublishedFunder: Leverhulme Trust; Id: http://dx.doi.org/10.13039/501100000275; Grant(s): RPG-2019-366This work aims to develop an integrated conceptual design process to assess the scalability and performance of propulsion systems of resonant motor-driven flapping wing vehicles. The developed process allows designers to explore the interaction between electrical, mechanical and aerodynamic domains in a single transparent design environment. Wings are modelled based on a quasi-steady treatment that evaluates aerodynamics from geometry and kinematic information. System mechanics is modelled as a damped second-order dynamic system operating at resonance with nonlinear aerodynamic damping. Motors are modelled using standard equations that relate operational parameters and AC voltage input. Design scaling laws are developed using available data based on current levels of technology. The design method provides insights into the effects of changing core design variables such as the actuator size, actuator mass fraction and pitching kinematics on the overall design solution. It is shown that system efficiency achieves peak values of 30–36% at motor masses of 0.5–1 g when a constant angle of attack kinematics is employed. While sinusoidal angle of attack kinematics demands more aerodynamic and electric powers compared with the constant angle of attack case, sinusoidal angle of attack kinematics can lead to a maximum difference of around 15% in peak system efficiency

Can scalable design of wings for flapping wing micro air vehicle be inspired by natural flyers?

Lift production is constantly a great challenge for flapping wing micro air vehicles (MAVs). Designing a workable wing, therefore, plays an essential role. Dimensional analysis is an effective and valuable tool in studying the biomechanics of flyers. In this paper, geometric similarity study is firstly presented. Then, the pw−AR ratio is defined and employed in wing performance estimation before the lumped parameter is induced and utilized in wing design. Comprehensive scaling laws on relation of wing performances for natural flyers are next investigated and developed via statistical analysis before being utilized to examine the wing design. Through geometric similarity study and statistical analysis, the results show that the aspect ratio and lumped parameter are independent on mass, and the lumped parameter is inversely proportional to the aspect ratio. The lumped parameters and aspect ratio of flapping wing MAVs correspond to the range of wing performances of natural flyers. Also, the wing performances of existing flapping wing MAVs are examined and follow the scaling laws. Last, the manufactured wings of the flapping wing MAVs are summarized. Our results will, therefore, provide a simple but powerful guideline for biologists and engineers who study the morphology of natural flyers and design flapping wing MAVs

Development, Design, Manufacture and Test of Flapping Wing Micro Aerial Vehicles

The field of FlappingWing Micro Air Vehicles (FWMAV) has been of interest in recent years and as shown to have many aerodynamic principles unconventional to traditional aviation aerodynamics. In addition to traditional manufacturing techniques, MAVs have utilized techniques and machines that have gained significant interest and investment over the past decade, namely in additive manufacturing. This dissertation discusses the techniques used to manufacture and build a 30 gram-force (gf) model which approaches the lower limit allowed by current commercial off-the-shelf items. The vehicle utilizes a novel mechanism that minimizes traditional kinematic issues associated with four bar mechanisms for flapping wing vehicles. A kinematic reasoning for large amplitude flapping is demonstrated namely, by lowering the cycle averaged angular acceleration of the wings. The vehicle is tested for control authority and lift of the mechanism using three servo drives for wing manipulation. The study then discusses the wing design, manufacturing techniques and limitations involved with the wings for a FWMAV. A set of 17 different wings are tested for lift reaching lifts of 38 gf using the aforementioned vehicle design. The variation in wings spurs the investigation of the flow patterns generated by the flexible wings and its interactions for multiple flapping amplitudes. Phase-lock particle image velocimetry (PIV) is used to investigate the unsteady flows generated by the vehicle. A novel flow pattern is experimentally found, namely “trailing edge vortex capture” upon wing reversal for all three flapping amplitudes, alluding to a newly discovered addition to the lift enhancing effect of wake capture. This effect is believed to be a result of flexible wings and may provide lift enhancing characteristics to wake capture

A Study on the Control, Dynamics, and Hardware of Micro Aerial Biomimetic Flapping Wing Vehicles

Biological flight encapsulates 400 million years of evolutionary ingenuity and thus is the most efficient way to fly. If an engineering pursuit is not adhering to biomimetic inspiration, then it is probably not the most efficient design. An aircraft that is inspired by bird or other biological modes of flight is called an ornithopter and is the original design of the first airplanes. Flapping wings hold much engineering promise with the potential to produce lift and thrust simultaneously. In this research, modeling and simulation of a flapping wing vehicle is generated. The purpose of this research is to develop a control algorithm for a model describing flapping wing robotics. The modeling approach consists of initially considering the simplest possible model and subsequently building models of increasing complexity. This research finds that a proportional derivative feedback and feedforward controller applied to a nonlinear model is the most practical controller for a flapping system. Due to the complex aerodynamics of ornithopter flight, modeling and control are very difficult. Overall, this project aims to analyze and simulate different forms of biological flapping flight and robotic ornithopters, investigate different control methods, and also acquire understanding of the hardware of a flapping wing aerial vehicle

A Review of Biomimetic Air Vehicle Research: 1984-2014

Biomimetic air vehicles (BAV) are a class of unmanned aircraft that mimic the flapping wing kinematics of flying organisms (e.g. birds, bats, and insects). Research into BAV has rapidly expanded over the last 30 years. In this paper, we present a comprehensive bibliometric review of engineering and biology journal articles that were published on this subject between 1984 and 2014. These articles are organized into five topical categories: aerodynamics, guidance and control, mechanisms, structures and materials, and system design. All of the articles are compartmented into one of these categories based on their primary focus. Several aspects of these articles are examined: publication year, number of citations, journal, authoring organization and country, non-academic funding sources, and the flying organism focused upon for bio-mimicry. This review provides useful information on the state of the art of BAV research and insight on potential future directions. Our intention is that this will serve as a resource for those already engaged in BAV research and enable insight that promotes further research interest

DESIGN AND CONTROL OF A HUMMINGBIRD-SIZE FLAPPING WING MICRO AERIAL VEHICLE

Flying animals with flapping wings may best exemplify the astonishing ability of natural selection on design optimization. They evince extraordinary prowess to control their flight, while demonstrating rich repertoire of agile maneuvers. They remain surprisingly stable during hover and can make sharp turns in a split second. Characterized by high-frequency flapping wing motion, unsteady aerodynamics, and the ability to hover and perform fast maneuvers, insect-like flapping flight presents an extraordinary aerial locomotion strategy perfected at small size scales. Flapping Wing Micro Aerial Vehicles (FWMAVs) hold great promise in bridging the performance gap between engineered flying vehicles and their natural counterparts. They are perfect candidates for potential applications such as fast response robots in search and rescue, environmental friendly agents in precision agriculture, surveillance and intelligence gathering MAVs, and miniature nodes in sensor networks