Ingress of threshold voltage-triggered hardware trojan in the modern FPGA fabric–detection methodology and mitigation

The ageing phenomenon of negative bias temperature instability (NBTI) continues to challenge the dynamic thermal management of modern FPGAs. Increased transistor density leads to thermal accumulation and propagates higher and non-uniform temperature variations across the FPGA. This aggravates the impact of NBTI on key PMOS transistor parameters such as threshold voltage and drain current. Where it ages the transistors, with a successive reduction in FPGA lifetime and reliability, it also challenges its security. The ingress of threshold voltage-triggered hardware Trojan, a stealthy and malicious electronic circuit, in the modern FPGA, is one such potential threat that could exploit NBTI and severely affect its performance. The development of an effective and efficient countermeasure against it is, therefore, highly critical. Accordingly, we present a comprehensive FPGA security scheme, comprising novel elements of hardware Trojan infection, detection, and mitigation, to protect FPGA applications against the hardware Trojan. Built around the threat model of a naval warship’s integrated self-protection system (ISPS), we propose a threshold voltage-triggered hardware Trojan that operates in a threshold voltage region of 0.45V to 0.998V, consuming ultra-low power (10.5nW), and remaining stealthy with an area overhead as low as 1.5% for a 28 nm technology node. The hardware Trojan detection sub-scheme provides a unique lightweight threshold voltage-aware sensor with a detection sensitivity of 0.251mV/nA. With fixed and dynamic ring oscillator-based sensor segments, the precise measurement of frequency and delay variations in response to shifts in the threshold voltage of a PMOS transistor is also proposed. Finally, the FPGA security scheme is reinforced with an online transistor dynamic scaling (OTDS) to mitigate the impact of hardware Trojan through run-time tolerant circuitry capable of identifying critical gates with worst-case drain current degradation

Stealthy parametric hardware Trojans in VLSI Circuits

Over the last decade, hardware Trojans have gained increasing attention in academia, industry and by government agencies. In order to design reliable countermeasures, it is crucial to understand how hardware Trojans can be built in practice. This is an area that has received relatively scant treatment in the literature. In this thesis, we examine how particularly stealthy parametric Trojans can be introduced to VLSI circuits. Parametric Trojans do not require any additional logic and are purely based on subtle manipulations on the sub-transistor level to modify the parameters of few transistors which makes them very hard to detect. We introduce a design methodology to insert stealthy parametric hardware Trojans which are based on injecting extremely rare path delay faults into the netlist of the target circuit. As a case study, we apply our method to a 32-bit multiplier circuit resulting in a stealthy Trojan multiplier that computes faulty outputs for specific combinations of input pairs that are applied to the circuit. The multiplier can be used to realize bug attacks, introduced by Biham et al. in 2008. We also extend this concept and show how it can be used to attack ECDH key agreement protocols. Our method is a versatile tool for designing stealthy Trojans for a given circuit and is not restricted to multipliers and the bug attack. In this thesis we also examine how a stealthy side-channel hardware Trojan can be inserted in a provably-secure side-channel analysis protected implementation. Once the Trojan is triggered, the malicious design exhibits exploitable side-channel leakage leading to successful key recovery attacks. The underlying concept is based on a secure masked hardware implementation which does not exhibit any detectable leakage. However, by running the device at a particular clock frequency one of the requirements of the underlying masking scheme is not fulfilled anymore, and the device\u27s side-channel leakage can be exploited. We apply our technique to a Threshold Implementation of the PRESENT block cipher realized in both FPGA and ASIC. We show that triggering the Trojan makes both FPGA and ASIC prototypes vulnerable to certain SCA attacks. True random number generators (TRNGs) are an essential component of cryptographic designs, which are used to generate private keys for encryption and authentication, and are used in masking countermeasures. This thesis also presents a mechanism to design a stealthy parametric hardware Trojan for ring oscillator-based TRNGs. When the Trojan is triggered by operation at a specific high temperature the malicious TRNG generates predictable non-random outputs, yet under normal operating conditions it works correctly. Also we elaborate a stochastic model based on Markov Chains by which the attacker can use their knowledge of the Trojan to predict the TRNG outputs

Stealthy Opaque Predicates in Hardware -- Obfuscating Constant Expressions at Negligible Overhead

Opaque predicates are a well-established fundamental building block for software obfuscation. Simplified, an opaque predicate implements an expression that provides constant Boolean output, but appears to have dynamic behavior for static analysis. Even though there has been extensive research regarding opaque predicates in software, techniques for opaque predicates in hardware are barely explored. In this work, we propose a novel technique to instantiate opaque predicates in hardware, such that they (1) are resource-efficient, and (2) are challenging to reverse engineer even with dynamic analysis capabilities. We demonstrate the applicability of opaque predicates in hardware for both, protection of intellectual property and obfuscation of cryptographic hardware Trojans. Our results show that we are able to implement stealthy opaque predicates in hardware with minimal overhead in area and no impact on latency

A Touch of Evil: High-Assurance Cryptographic Hardware from Untrusted Components

The semiconductor industry is fully globalized and integrated circuits (ICs) are commonly defined, designed and fabricated in different premises across the world. This reduces production costs, but also exposes ICs to supply chain attacks, where insiders introduce malicious circuitry into the final products. Additionally, despite extensive post-fabrication testing, it is not uncommon for ICs with subtle fabrication errors to make it into production systems. While many systems may be able to tolerate a few byzantine components, this is not the case for cryptographic hardware, storing and computing on confidential data. For this reason, many error and backdoor detection techniques have been proposed over the years. So far all attempts have been either quickly circumvented, or come with unrealistically high manufacturing costs and complexity. This paper proposes Myst, a practical high-assurance architecture, that uses commercial off-the-shelf (COTS) hardware, and provides strong security guarantees, even in the presence of multiple malicious or faulty components. The key idea is to combine protective-redundancy with modern threshold cryptographic techniques to build a system tolerant to hardware trojans and errors. To evaluate our design, we build a Hardware Security Module that provides the highest level of assurance possible with COTS components. Specifically, we employ more than a hundred COTS secure crypto-coprocessors, verified to FIPS140-2 Level 4 tamper-resistance standards, and use them to realize high-confidentiality random number generation, key derivation, public key decryption and signing. Our experiments show a reasonable computational overhead (less than 1% for both Decryption and Signing) and an exponential increase in backdoor-tolerance as more ICs are added

Efficient Control-Flow Subgraph Matching for Detecting Hardware Trojans in RTL Models

Only few solutions for Hardware Trojan (HT) detection work at Register-Transfer Level (RTL), thus delaying the identification of possible security issues at lower abstraction levels of the design process. In addition, the most of existing approaches work only for specific kinds of HTs. To overcome these limitations, we present a verification approach that detects different types of HTs in RTL models by exploiting an efficient control-flow subgraph matching algorithm. The prototypes of HTs that can be detected are modelled in a library by using Control-Flow Graphs (CFGs) that can be parametrised and extended to cover several variants of Trojan patterns. Experimental results show that our approach is effective and efficient in comparison with other state-of-the-art solutions

Circuit Techniques for Low-Power and Secure Internet-of-Things Systems

The coming of Internet of Things (IoT) is expected to connect the physical world to the cyber world through ubiquitous sensors, actuators and computers. The nature of these applications demand long battery life and strong data security. To connect billions of things in the world, the hardware platform for IoT systems must be optimized towards low power consumption, high energy efficiency and low cost. With these constraints, the security of IoT systems become a even more difficult problem compared to that of computer systems. A new holistic system design considering both hardware and software implementations is demanded to face these new challenges. In this work, highly robust and low-cost true random number generators (TRNGs) and physically unclonable functions (PUFs) are designed and implemented as security primitives for secret key management in IoT systems. They provide three critical functions for crypto systems including runtime secret key generation, secure key storage and lightweight device authentication. To achieve robustness and simplicity, the concept of frequency collapse in multi-mode oscillator is proposed, which can effectively amplify the desired random variable in CMOS devices (i.e. process variation or noise) and provide a runtime monitor of the output quality. A TRNG with self-tuning loop to achieve robust operation across -40 to 120 degree Celsius and 0.6 to 1V variations, a TRNG that can be fully synthesized with only standard cells and commercial placement and routing tools, and a PUF with runtime filtering to achieve robust authentication, are designed based upon this concept and verified in several CMOS technology nodes. In addition, a 2-transistor sub-threshold amplifier based "weak" PUF is also presented for chip identification and key storage. This PUF achieves state-of-the-art 1.65% native unstable bit, 1.5fJ per bit energy efficiency, and 3.16% flipping bits across -40 to 120 degree Celsius range at the same time, while occupying only 553 feature size square area in 180nm CMOS. Secondly, the potential security threats of hardware Trojan is investigated and a new Trojan attack using analog behavior of digital processors is proposed as the first stealthy and controllable fabrication-time hardware attack. Hardware Trojan is an emerging concern about globalization of semiconductor supply chain, which can result in catastrophic attacks that are extremely difficult to find and protect against. Hardware Trojans proposed in previous works are based on either design-time code injection to hardware description language or fabrication-time modification of processing steps. There have been defenses developed for both types of attacks. A third type of attack that combines the benefits of logical stealthy and controllability in design-time attacks and physical "invisibility" is proposed in this work that crosses the analog and digital domains. The attack eludes activation by a diverse set of benchmarks and evades known defenses. Lastly, in addition to security-related circuits, physical sensors are also studied as fundamental building blocks of IoT systems in this work. Temperature sensing is one of the most desired functions for a wide range of IoT applications. A sub-threshold oscillator based digital temperature sensor utilizing the exponential temperature dependence of sub-threshold current is proposed and implemented. In 180nm CMOS, it achieves 0.22/0.19K inaccuracy and 73mK noise-limited resolution with only 8865 square micrometer additional area and 75nW extra power consumption to an existing IoT system.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/138779/1/kaiyuan_1.pd

The First Thorough Side-Channel Hardware Trojan

Hardware Trojans have gained high attention in academia, industry and by government agencies. The effective detection mechanisms and countermeasures against such malicious designs are only possible when there is a deep understanding of how hardware Trojans can be built in practice. In this work, we present a mechanism which shows how easily a stealthy hardware Trojan can be inserted in a provably-secure side-channel analysis protected implementation. Once the Trojan is triggered, the malicious design exhibits exploitable side-channel leakage leading to successful key recovery attacks. Such a Trojan does not add or remove any logic (even a single gate) to the design which makes it very hard to detect. In ASIC platforms, it is indeed inserted by subtle manipulations at the sub-transistor level to modify the parameters of a few transistors. The same is applicable on FPGA applications by changing the routing of particular signals, leading to null resource utilization overhead. The underlying concept is based on a secure masked hardware implementation which does not exhibit any detectable leakage. However, by running the device at a particular clock frequency one of the requirements of the underlying masking scheme is not fulfilled anymore, i.e., the Trojan is triggered, and the device\u27s side-channel leakage can be exploited. Although as a case study we show an application of our designed Trojan on an FPGA-based threshold implementation of the PRESENT cipher, our methodology is a general approach and can be applied on any similar circuit