An Energy-Efficient Reconfigurable Circuit Switched Network-on-Chip

Network-on-Chip (NoC) is an energy-efficient on-chip communication architecture for multi-tile System-on-Chip (SoC) architectures. The SoC architecture, including its run-time software, can replace inflexible ASICs for future ambient systems. These ambient systems have to be flexible as well as energy-efficient. To find an energy-efficient solution for the communication network we analyze three wireless applications. Based on their communication requirements we observe that revisiting of the circuit switching techniques is beneficial. In this paper we propose a new energy-efficient reconfigurable circuit-switched Network-on-Chip. By physically separating the concurrent data streams we reduce the overall energy consumption. The circuit-switched router has been synthesized and analyzed for its power consumption in 0.13 ¿m technology. A 5-port circuit-switched router has an area of 0.05 mm2 and runs at 1075 MHz. The proposed architecture consumes 3.5 times less energy compared to its packet-switched equivalen

Savior: A Reliable Fault Resilient Router Architecture for Network-on-Chip

[EN] The router plays an important role in communication among different processing cores in on-chip networks. Technology scaling on one hand has enabled the designers to integrate multiple processing components on a single chip; on the other hand, it becomes the reason for faults. A generic router consists of the buffers and pipeline stages. A single fault may result in an undesirable situation of degraded performance or a whole chip may stop working. Therefore, it is necessary to provide permanent fault tolerance to all the components of the router. In this paper, we propose a mechanism that can tolerate permanent faults that occur in the router. We exploit the fault-tolerant techniques of resource sharing and paring between components for the input port unit and routing computation (RC) unit, the resource borrowing for virtual channel allocator (VA) and multiple paths for switch allocator (SA) and crossbar (XB). The experimental results and analysis show that the proposed mechanism enhances the reliability of the router architecture towards permanent faults at the cost of 29% area overhead. The proposed router architecture achieves the highest Silicon Protection Factor (SPF) metric, which is 24.4 as compared to the state-of-the-art fault-tolerant architectures. It incurs an increase in latency for SPLASH2 and PARSEC benchmark traffics, which is minimal as compared to the baseline router.This work was supported by the Spanish 'Ministerio de Ciencia Innovacion y Universidades' and FEDER program in the framework of the 'Proyectos de I+D d Generacion de Conocimiento del Programa Estatal de Generacion de Conocimiento y Fortalecimiento Cientifico y Tecnologico del Sistema de I+D+i, Subprograma Estatal de Generacion de Conocimiento' (ref: PGC2018-095747-B-I00).Hussain, A.; Irfan, M.; Baloch, NK.; Draz, U.; Ali, T.; Glowacz, A.; Dunai, L.... (2020). Savior: A Reliable Fault Resilient Router Architecture for Network-on-Chip. Electronics. 9(11):1-18. https://doi.org/10.3390/electronics9111783S118911Borkar, S. (1999). Design challenges of technology scaling. IEEE Micro, 19(4), 23-29. doi:10.1109/40.782564Latif, K., Rahmani, A.-M., Nigussie, E., Seceleanu, T., Radetzki, M., & Tenhunen, H. (2013). Partial Virtual Channel Sharing: A Generic Methodology to Enhance Resource Management and Fault Tolerance in Networks-on-Chip. Journal of Electronic Testing, 29(3), 431-452. doi:10.1007/s10836-013-5389-5Borkar, S. (2005). Designing Reliable Systems from Unreliable Components: The Challenges of Transistor Variability and Degradation. IEEE Micro, 25(6), 10-16. doi:10.1109/mm.2005.110Ali, T., Noureen, J., Draz, U., Shaf, A., Yasin, S., & Ayaz, M. (2018). Participants Ranking Algorithm for Crowdsensing in Mobile Communication. ICST Transactions on Scalable Information Systems, 5(16), 154476. doi:10.4108/eai.13-4-2018.154476Ali, T., Draz, U., Yasin, S., Noureen, J., shaf, A., & Zardari, M. (2018). An Efficient Participant’s Selection Algorithm for Crowdsensing. International Journal of Advanced Computer Science and Applications, 9(1). doi:10.14569/ijacsa.2018.090154Poluri, P., & Louri, A. (2016). Shield: A Reliable Network-on-Chip Router Architecture for Chip Multiprocessors. IEEE Transactions on Parallel and Distributed Systems, 27(10), 3058-3070. doi:10.1109/tpds.2016.2521641Valinataj, M., & Shahiri, M. (2016). A low-cost, fault-tolerant and high-performance router architecture for on-chip networks. Microprocessors and Microsystems, 45, 151-163. doi:10.1016/j.micpro.2016.04.009Kim, J., Nicopoulos, C., Park, D., Narayanan, V., Yousif, M. S., & Das, C. R. (2006). A Gracefully Degrading and Energy-Efficient Modular Router Architecture for On-Chip Networks. ACM SIGARCH Computer Architecture News, 34(2), 4-15. doi:10.1145/1150019.1136487Polian, I., & Hayes, J. P. (2011). Selective Hardening: Toward Cost-Effective Error Tolerance. IEEE Design & Test of Computers, 28(3), 54-63. doi:10.1109/mdt.2010.120Mohammed, H., Flayyih, W., & Rokhani, F. (2019). Tolerating Permanent Faults in the Input Port of the Network on Chip Router. Journal of Low Power Electronics and Applications, 9(1), 11. doi:10.3390/jlpea9010011Wang, L., Ma, S., Li, C., Chen, W., & Wang, Z. (2017). A high performance reliable NoC router. Integration, 58, 583-592. doi:10.1016/j.vlsi.2016.10.016Shafique, M. A., Baloch, N. K., Baig, M. I., Hussain, F., Zikria, Y. B., & Kim, S. W. (2020). NoCGuard: A Reliable Network-on-Chip Router Architecture. Electronics, 9(2), 342. doi:10.3390/electronics9020342Poluri, P., & Louri, A. (2015). A Soft Error Tolerant Network-on-Chip Router Pipeline for Multi-Core Systems. IEEE Computer Architecture Letters, 14(2), 107-110. doi:10.1109/lca.2014.2360686Feng, C., Lu, Z., Jantsch, A., Zhang, M., & Xing, Z. (2013). Addressing Transient and Permanent Faults in NoC With Efficient Fault-Tolerant Deflection Router. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 21(6), 1053-1066. doi:10.1109/tvlsi.2012.2204909Liu, J., Harkin, J., Li, Y., & Maguire, L. P. (2016). Fault-Tolerant Networks-on-Chip Routing With Coarse and Fine-Grained Look-Ahead. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 35(2), 260-273. doi:10.1109/tcad.2015.2459050Runge, A. (2015). FaFNoC: A Fault-tolerant and Bufferless Network-on-chip. Procedia Computer Science, 56, 397-402. doi:10.1016/j.procs.2015.07.226Binkert, N., Beckmann, B., Black, G., Reinhardt, S. K., Saidi, A., Basu, A., … Wood, D. A. (2011). The gem5 simulator. ACM SIGARCH Computer Architecture News, 39(2), 1-7. doi:10.1145/2024716.202471

Efficient router design for network on chip

A Network-on-chip (NoC) is a new paradigm in complex system-on-chip (SoC) designs that provide efficient on chip communication networks. It allows scalable communication and allows decoupling of communication and computation. The data is routed through the networks in terms of packets. The routing of data is mainly done by routers. So the architecture of router must be an efficient one with a lower latency and higher throughput. In this project we designed, implemented and analyzed three different router architectures for a network on chip communication. The routers have five ports, four ports connected to other ports in four different directions and the fifth port connected to the processing element through a network interface. The first architecture is a basic router with demultiplexer and scheduler. The second architecture consists of crossbar switch and arbiter. The third architecture uses the CDMA technology that is popular in wireless communication. The three architectures were analyzed for their performance in terms of delay, throughput and latency and we concluded that CDMA router performs better than the other two

An Efficient Network-on-Chip Architecture Based on the Fat-Tree (FT) Topology

A novel approach for an efficient network-on-chip using a modified Fat Tree is presented. Contention is eliminated and latency is reduced through an improved topology and router architecture. The adopted topology increases performance without a substantial increase in the routing cost. This is achieved by using an improved buffer-less, paremeterizable router architecture. The proposed router architecture is simple to implement yet can achieve the required packet collision avoidance. Simulation results that show the level of performance achieved by both the topology and the router architecture are presented. A throughput of more than 90% is achieved way above the 40-50% usually seen in other networks on chips

An Efficient Network-on-Chip Architecture Based on the Fat-Tree (FT) Topology

A novel approach for an efficient network-on-chip using a modified Fat Tree is presented. Contention is eliminated and latency is reduced through an improved topology and router architecture. The adopted topology increases performance without a substantial increase in the routing cost. This is achieved by using an improved buffer-less, paremeterizable router architecture. The proposed router architecture is simple to implement yet can achieve the required packet collision avoidance. Simulation results that show the level of performance achieved by both the topology and the router architecture are presented. A throughput of more than 90% is achieved way above the 40-50% usually seen in other networks on chips

Exploration and Design of Power-Efficient Networked Many-Core Systems

Multiprocessing is a promising solution to meet the requirements of near future applications. To get full benefit from parallel processing, a manycore system needs efficient, on-chip communication architecture. Networkon- Chip (NoC) is a general purpose communication concept that offers highthroughput, reduced power consumption, and keeps complexity in check by a regular composition of basic building blocks. This thesis presents power efficient communication approaches for networked many-core systems. We address a range of issues being important for designing power-efficient manycore systems at two different levels: the network-level and the router-level. From the network-level point of view, exploiting state-of-the-art concepts such as Globally Asynchronous Locally Synchronous (GALS), Voltage/ Frequency Island (VFI), and 3D Networks-on-Chip approaches may be a solution to the excessive power consumption demanded by today’s and future many-core systems. To this end, a low-cost 3D NoC architecture, based on high-speed GALS-based vertical channels, is proposed to mitigate high peak temperatures, power densities, and area footprints of vertical interconnects in 3D ICs. To further exploit the beneficial feature of a negligible inter-layer distance of 3D ICs, we propose a novel hybridization scheme for inter-layer communication. In addition, an efficient adaptive routing algorithm is presented which enables congestion-aware and reliable communication for the hybridized NoC architecture. An integrated monitoring and management platform on top of this architecture is also developed in order to implement more scalable power optimization techniques. From the router-level perspective, four design styles for implementing power-efficient reconfigurable interfaces in VFI-based NoC systems are proposed. To enhance the utilization of virtual channel buffers and to manage their power consumption, a partial virtual channel sharing method for NoC routers is devised and implemented. Extensive experiments with synthetic and real benchmarks show significant power savings and mitigated hotspots with similar performance compared to latest NoC architectures. The thesis concludes that careful codesigned elements from different network levels enable considerable power savings for many-core systems.Siirretty Doriast

Modeling Router Hotspots on Network-On-Chip

A Network-on-Chip (NoC) is a new paradigm in complex System-on-Chip (SoC) designs that provides efficient on-chip communication architecture. It offers scalable communication to SoC and allows decoupling of communication and computation. In NoC, design space exploration is critical due to trade-offs among latency, area, and power consumption. Hence, analytical modeling is an important step for early NoC design. This paper presents a novel top-down approach router model, and utilizes this model for analysis mesh NoC performance measured in terms of throughput, average of queue size, efficiency, and loss and wait time. As case study, the proposed model is used to map a MPEG4 video core to a 4x4 mesh NoC with deterministic routing to measure the overall NoC quality of service, The model is used also to present how much occupancy of average queue size for each router that reduces resources (hardware) area and cost. The accuracy of this approach and its practical use is illustrated through extensive simulation results

Energy Model of Networks-on-Chip and a Bus

A Network-on-Chip (NoC) is an energy-efficient onchip communication architecture for Multi-Processor Systemon-Chip (MPSoC) architectures. In earlier papers we proposed two Network-on-Chip architectures based on packet-switching and circuit-switching. In this paper we derive an energy model for both NoC architectures to predict their energy consumption per transported bit. Both architectures are also compared with a traditional bus architecture. The energy model is primarily needed to find a near optimal run-time mapping (from an energy point of view) of inter-process communication to NoC link

Eyeriss v2: A Flexible Accelerator for Emerging Deep Neural Networks on Mobile Devices

A recent trend in DNN development is to extend the reach of deep learning applications to platforms that are more resource and energy constrained, e.g., mobile devices. These endeavors aim to reduce the DNN model size and improve the hardware processing efficiency, and have resulted in DNNs that are much more compact in their structures and/or have high data sparsity. These compact or sparse models are different from the traditional large ones in that there is much more variation in their layer shapes and sizes, and often require specialized hardware to exploit sparsity for performance improvement. Thus, many DNN accelerators designed for large DNNs do not perform well on these models. In this work, we present Eyeriss v2, a DNN accelerator architecture designed for running compact and sparse DNNs. To deal with the widely varying layer shapes and sizes, it introduces a highly flexible on-chip network, called hierarchical mesh, that can adapt to the different amounts of data reuse and bandwidth requirements of different data types, which improves the utilization of the computation resources. Furthermore, Eyeriss v2 can process sparse data directly in the compressed domain for both weights and activations, and therefore is able to improve both processing speed and energy efficiency with sparse models. Overall, with sparse MobileNet, Eyeriss v2 in a 65nm CMOS process achieves a throughput of 1470.6 inferences/sec and 2560.3 inferences/J at a batch size of 1, which is 12.6x faster and 2.5x more energy efficient than the original Eyeriss running MobileNet. We also present an analysis methodology called Eyexam that provides a systematic way of understanding the performance limits for DNN processors as a function of specific characteristics of the DNN model and accelerator design; it applies these characteristics as sequential steps to increasingly tighten the bound on the performance limits.Comment: accepted for publication in IEEE Journal on Emerging and Selected Topics in Circuits and Systems. This extended version on arXiv also includes Eyexam in the appendi