523 research outputs found
Subspace Tracking and Least Squares Approaches to Channel Estimation in Millimeter Wave Multiuser MIMO
The problem of MIMO channel estimation at millimeter wave frequencies, both
in a single-user and in a multi-user setting, is tackled in this paper. Using a
subspace approach, we develop a protocol enabling the estimation of the right
(resp. left) singular vectors at the transmitter (resp. receiver) side; then,
we adapt the projection approximation subspace tracking with deflation and the
orthogonal Oja algorithms to our framework and obtain two channel estimation
algorithms. We also present an alternative algorithm based on the least squares
approach. The hybrid analog/digital nature of the beamformer is also explicitly
taken into account at the algorithm design stage. In order to limit the system
complexity, a fixed analog beamformer is used at both sides of the
communication links. The obtained numerical results, showing the accuracy in
the estimation of the channel matrix dominant singular vectors, the system
achievable spectral efficiency, and the system bit-error-rate, prove that the
proposed algorithms are effective, and that they compare favorably, in terms of
the performance-complexity trade-off, with respect to several competing
alternatives.Comment: To appear on the IEEE Transactions on Communication
CABE : a cloud-based acoustic beamforming emulator for FPGA-based sound source localization
Microphone arrays are gaining in popularity thanks to the availability of low-cost microphones. Applications including sonar, binaural hearing aid devices, acoustic indoor localization techniques and speech recognition are proposed by several research groups and companies. In most of the available implementations, the microphones utilized are assumed to offer an ideal response in a given frequency domain. Several toolboxes and software can be used to obtain a theoretical response of a microphone array with a given beamforming algorithm. However, a tool facilitating the design of a microphone array taking into account the non-ideal characteristics could not be found. Moreover, generating packages facilitating the implementation on Field Programmable Gate Arrays has, to our knowledge, not been carried out yet. Visualizing the responses in 2D and 3D also poses an engineering challenge. To alleviate these shortcomings, a scalable Cloud-based Acoustic Beamforming Emulator (CABE) is proposed. The non-ideal characteristics of microphones are considered during the computations and results are validated with acoustic data captured from microphones. It is also possible to generate hardware description language packages containing delay tables facilitating the implementation of Delay-and-Sum beamformers in embedded hardware. Truncation error analysis can also be carried out for fixed-point signal processing. The effects of disabling a given group of microphones within the microphone array can also be calculated. Results and packages can be visualized with a dedicated client application. Users can create and configure several parameters of an emulation, including sound source placement, the shape of the microphone array and the required signal processing flow. Depending on the user configuration, 2D and 3D graphs showing the beamforming results, waterfall diagrams and performance metrics can be generated by the client application. The emulations are also validated with captured data from existing microphone arrays.</jats:p
Single-Carrier Modulation versus OFDM for Millimeter-Wave Wireless MIMO
This paper presents results on the achievable spectral efficiency and on the
energy efficiency for a wireless multiple-input-multiple-output (MIMO) link
operating at millimeter wave frequencies (mmWave) in a typical 5G scenario. Two
different single-carrier modem schemes are considered, i.e., a traditional
modulation scheme with linear equalization at the receiver, and a
single-carrier modulation with cyclic prefix, frequency-domain equalization and
FFT-based processing at the receiver; these two schemes are compared with a
conventional MIMO-OFDM transceiver structure. Our analysis jointly takes into
account the peculiar characteristics of MIMO channels at mmWave frequencies,
the use of hybrid (analog-digital) pre-coding and post-coding beamformers, the
finite cardinality of the modulation structure, and the non-linear behavior of
the transmitter power amplifiers. Our results show that the best performance is
achieved by single-carrier modulation with time-domain equalization, which
exhibits the smallest loss due to the non-linear distortion, and whose
performance can be further improved by using advanced equalization schemes.
Results also confirm that performance gets severely degraded when the link
length exceeds 90-100 meters and the transmit power falls below 0 dBW.Comment: accepted for publication on IEEE Transactions on Communication
Design and Realization of Fully-digital Microwave and Mm-wave Multi-beam Arrays with FPGA/RF-SOC Signal Processing
There has been a constant increase in data-traffic and device-connections in mobile wireless communications, which led the fifth generation (5G) implementations to exploit mm-wave bands at 24/28 GHz. The next-generation wireless access point (6G and beyond) will need to adopt large-scale transceiver arrays with a combination of multi-input-multi-output (MIMO) theory and fully digital multi-beam beamforming. The resulting high gain array factors will overcome the high path losses at mm-wave bands, and the simultaneous multi-beams will exploit the multi-directional channels due to multi-path effects and improve the signal-to-noise ratio. Such access points will be based on electronic systems which heavily depend on the integration of RF electronics with digital signal processing performed in Field programmable gate arrays (FPGA)/ RF-system-on-chip (SoC).
This dissertation is directed towards the investigation and realization of fully-digital phased arrays that can produce wideband simultaneous multi-beams with FPGA or RF-SoC digital back-ends. The first proposed approach is a spatial bandpass (SBP) IIR filter-based beamformer, and is based on the concepts of space-time network resonance. A 2.4 GHz, 16-element array receiver, has been built for real-time experimental verification of this approach. The second and third approaches are respectively based on Discrete Fourier Transform (DFT) theory, and a lens plus focal planar array theory. Lens based approach is essentially an analog model of DFT. These two approaches are verified for a 28 GHz 800 MHz mm-wave implementation with RF-SoC as the digital back-end. It has been shown that for all proposed multibeam beamformer implementations, the measured beams are well aligned with those of the simulated. The proposed approaches differ in terms of their architectures, hardware complexity and costs, which will be discussed as this dissertation opens up.
This dissertation also presents an application of multi-beam approaches for RF directional sensing applications to explore white spaces within the spatio-temporal spectral regions. A real-time directional sensing system is proposed to capture the white spaces within the 2.4 GHz Wi-Fi band.
Further, this dissertation investigates the effect of electro-magnetic (EM) mutual coupling in antenna arrays on the real-time performance of fully-digital transceivers. Different algorithms are proposed to uncouple the mutual coupling in digital domain. The first one is based on finding the MC transfer function from the measured S-parameters of the antenna array and employing it in a Frost FIR filter in the beamforming backend. The second proposed method uses fast algorithms to realize the inverse of mutual coupling matrix via tridiagonal Toeplitz matrices having sparse factors. A 5.8 GHz 32-element array and 1-7 GHz 7-element tightly coupled dipole array (TCDA) have been employed to demonstrate the proof-of-concept of these algorithms
A Vision and Framework for the High Altitude Platform Station (HAPS) Networks of the Future
A High Altitude Platform Station (HAPS) is a network node that operates in
the stratosphere at an of altitude around 20 km and is instrumental for
providing communication services. Precipitated by technological innovations in
the areas of autonomous avionics, array antennas, solar panel efficiency
levels, and battery energy densities, and fueled by flourishing industry
ecosystems, the HAPS has emerged as an indispensable component of
next-generations of wireless networks. In this article, we provide a vision and
framework for the HAPS networks of the future supported by a comprehensive and
state-of-the-art literature review. We highlight the unrealized potential of
HAPS systems and elaborate on their unique ability to serve metropolitan areas.
The latest advancements and promising technologies in the HAPS energy and
payload systems are discussed. The integration of the emerging Reconfigurable
Smart Surface (RSS) technology in the communications payload of HAPS systems
for providing a cost-effective deployment is proposed. A detailed overview of
the radio resource management in HAPS systems is presented along with
synergistic physical layer techniques, including Faster-Than-Nyquist (FTN)
signaling. Numerous aspects of handoff management in HAPS systems are
described. The notable contributions of Artificial Intelligence (AI) in HAPS,
including machine learning in the design, topology management, handoff, and
resource allocation aspects are emphasized. The extensive overview of the
literature we provide is crucial for substantiating our vision that depicts the
expected deployment opportunities and challenges in the next 10 years
(next-generation networks), as well as in the subsequent 10 years
(next-next-generation networks).Comment: To appear in IEEE Communications Surveys & Tutorial
- …