Spacelab system analysis: A study of the Marshall Avionics System Testbed (MAST)

An analysis of the Marshall Avionics Systems Testbed (MAST) communications requirements is presented. The average offered load for typical nodes is estimated. Suitable local area networks are determined

Spacelab system analysis: A study of communications systems for advanced launch systems

An analysis of the required performance of internal avionics data bases for future launch vehicles is presented. Suitable local area networks that can service these requirements are determined

Fiber optic voice/data network

An asynchronous, high-speed, fiber optic local area network originally developed for tactical environments with additional benefits for other environments such as spacecraft, and the like. The network supports ordinary data packet traffic simultaneously with synchronous T1 voice traffic over a common token ring channel; however, the techniques and apparatus of this invention can be applied to any deterministic class of packet data networks, including multitier backbones, that must transport stream data (e.g., video, SAR, sensors) as well as data. A voice interface module parses, buffers, and resynchronizes the voice data to the packet network employing elastic buffers on both the sending and receiving ends. Voice call setup and switching functions are performed external to the network with ordinary PABX equipment. Clock information is passed across network boundaries in a token passing ring by preceeding the token with an idle period of non-transmission which allows the token to be used to re-establish a clock synchronized to the data. Provision is made to monitor and compensate the elastic receiving buffers so as to prevent them from overflowing or going empty

Switch configuration for migration to optical fiber network

The purpose is to investigate the migration of an Ethernet LAN segment to fiber optics. At the present time it is proposed to support a Fiber Distributed Data Interface (FDDI) backbone and to upgrade the VAX cluster to fiber optic interface. Possibly some workstations will have an FDDI interface. The remaining stations on the Ethernet LAN will be segmented. The rationale for migrating from the present Ethernet configuration to a fiber optic backbone is due to the increase in the number of workstations and the movement of applications to a windowing environment, extensive document transfers, and compute intensive applications

Advanced information processing system: The Army fault tolerant architecture conceptual study. Volume 2: Army fault tolerant architecture design and analysis

Described here is the Army Fault Tolerant Architecture (AFTA) hardware architecture and components and the operating system. The architectural and operational theory of the AFTA Fault Tolerant Data Bus is discussed. The test and maintenance strategy developed for use in fielded AFTA installations is presented. An approach to be used in reducing the probability of AFTA failure due to common mode faults is described. Analytical models for AFTA performance, reliability, availability, life cycle cost, weight, power, and volume are developed. An approach is presented for using VHSIC Hardware Description Language (VHDL) to describe and design AFTA's developmental hardware. A plan is described for verifying and validating key AFTA concepts during the Dem/Val phase. Analytical models and partial mission requirements are used to generate AFTA configurations for the TF/TA/NOE and Ground Vehicle missions

ISDN at NASA Lewis Research Center

An expository investigation of the potential impact of the Integrated Services Digital Network (ISDN) at NASA Lewis Research Center is described. To properly frame the subject, the paper contains a detailed survey of the components of Narrowband ISDN. The principles and objectives are presented as decreed by the Consultative Committee for International Telephone and Telegraph (CCITT). The various channel types are delineated and their associated service combinations are described. The subscriber-access network functions are explained pictorially via the ISDN reference configuration. A section on switching techniques is presented to enable the reader to understand the emergence of the concept of fast packet switching. This new technology is designed to operate over the high bandwidth, low error rate transmission media that characterizes the LeRC environment. A brief introduction to the next generation of networks is covered with sections on Broadband ISDM (B-ISDN), Asynchronous Transfer Mode (ATM), and Synchronous Optical Networks (SONET). Applications at LeRC are presented, first in terms of targets of opportunity, then in light of compatibility constraints. In-place pilot projects and testing are described that demonstrate actual usage at LeRC

Route recovery schemes for link and node failure and link congestion

Link/Node failure occurs frequently causing service disruption in computer networks. Hardware techniques have been developed to protect the network from Link/Node failure. These techniques work in physical layer, therefore their convergence time is very small. On the other hand, many schemes have been proposed to mitigate the failure influence on the network. These schemes work in upper layers such as the network layer. However, hardware solutions faster than other schemes, but they are expensive. Link/Node failure causes all flows which were using the failed link/node are temporarily interrupted till a new path reestablished. Three recovery algorithms have been proposed that mitigate the changes occur in the network. These changes are link/node failure and link congestion. The algorithms mainly pre-compute a backup next hop for each destination in the network. This path is feasible to accommodate re-routed traffic when a failure occurs without causing congestion or loops. Simulations have been conducted to show the performance of the proposed algorithms using ns2 network simulation tool. The results show fast recovery for all flows were using the link/node failure. Furthermore, the throughput per node also increases due to decrease interruption service time

LANSIM and its applications to distributed EMS

Distributed energy management systems (EMS) open up a host of alternative design options. Simulation plays an important role in evaluating performance and in comparing alternative designs. Currently all the proposed distributed EMSs are local area network (LAN)-based. A LAN simulator, LANSIM, has been developed. To illustrate the application of LANSIM, comparisons are made with different distributed EMS configurations, different LAN technologies (Ethernet and FDDI), and different Ethernet implementations.published_or_final_versio