Routing in a many-to-one communication scenario in a realistic VDTN

In this paper, we evaluate and compare the performance of different routing protocols in a many-to-one communication within a Vehicular Delay Tolerant Network (VDTN). Seven groups with three stationary sensor nodes sense the temperature, humidity and wind speed and send these data to a stationary destination node that collect them for statistical and data analysis purposes. Vehicles moving in Tirana city roads in Albania during the opportunistic contacts will exchange the sensed data to destination node. The simulations are conducted with the Opportunistic Network Environment (ONE) simulator. For the simulations we considered two different scenarios where the distance of the source nodes from the destination is short and long. For both scenarios the effect of node density, ttl and node movement model is evaluated. The performance is analyzed using delivery probability, overhead ratio, average latency, average number of hops and average buffer time metrics. The simulation results show that the increase of node density increases the delivery probability for all protocols and both scenarios, and better results are achieved when shortest-path map-based movement model is used. The increase of ttl slightly affects the performance of all protocols. By increasing the distance between source nodes and destination node, delivery probability is decreased almost 10% for all protocols, the overhead for sprayandwait protocol does not change, but for other protocols is slightly increased and the average number of hops and average latency is increased.Peer ReviewedPostprint (author's final draft

Coherent, automatic address resolution for vehicular ad hoc networks

Published in: Int. J. of Ad Hoc and Ubiquitous Computing, 2017 Vol.25, No.3, pp.163 - 179. DOI: 10.1504/IJAHUC.2017.10001935The interest in vehicular communications has increased notably. In this paper, the use of the address resolution (AR) procedures is studied for vehicular ad hoc networks (VANETs). We analyse the poor performance of AR transactions in such networks and we present a new proposal called coherent, automatic address resolution (CAAR). Our approach inhibits the use of AR transactions and instead increases the usefulness of routing signalling to automatically match the IP and MAC addresses. Through extensive simulations in realistic VANET scenarios using the Estinet simulator, we compare our proposal CAAR to classical AR and to another of our proposals that enhances AR for mobile wireless networks, called AR+. In addition, we present a performance evaluation of the behaviour of CAAR, AR and AR+ with unicast traffic of a reporting service for VANETs. Results show that CAAR outperforms the other two solutions in terms of packet losses and furthermore, it does not introduce additional overhead.Postprint (published version

Performance Assessment of Aggregation and Deaggregation Algorithms in Vehicular Delay-Tolerant Networks

Vehicular Delay-Tolerant Networks (VDTNs) are a new approach for vehicular communications where vehicles cooperate with each other, acting as the communication infrastructure, to provide low-cost asynchronous opportunistic communications. These communication technologies assume variable delays and bandwidth constraints characterized by a non-transmission control protocol/ internet protocol architecture but interacting with it at the edge of the network. VDTNs are based on the principle of asynchronous communications, bundleoriented communication from the DTN architecture, employing a store-carryand- forward routing paradigm. In this sense, VDTNs should use the tight network resources optimizing each opportunistic contact among nodes. At the ingress edge nodes, incoming IP Packets (datagrams) are assembled into large data packets, called bundles. The bundle aggregation process plays an important role on the performance of VDTN applications. Then, this paper presents three aggregation algorithms based on time, bundle size, and a hybrid solution with combination of both. Furthermore, the following four aggregation schemes with quality of service (QoS) support are proposed: 1) single-class bundle with N = M, 2) composite-class bundle with N = M, 3) single-class bundle with N > M, and 4) composite-class bundle with N > M, where N is the number of classes of incoming packets and M is the number of priorities supported by the VDTN core network. The proposed mechanisms were evaluated through a laboratory testbed, called VDTN@Lab. The adaptive hybrid approach and the composite-class schemes present the best performance for different types of traffic load and best priorities distribution, respectively

Connectivity Analysis in Vehicular Ad-hoc Network based on VDTN

In the last decade, user demand has been increasing exponentially based on modern communication systems. One of these new technologies is known as mobile ad-hoc networking (MANET). One part of MANET is called a vehicular ad-hoc network (VANET). It has different types such as vehicle-to-vehicle (V2V), vehicular delay-tolerant networks, and vehicle-to-infrastructure (V2I). To provide sufficient quality of communication service in the Vehicular Delay-Tolerant Network (VDTN), it is important to present a comprehensive survey that shows the challenges and limitations of VANET. In this paper, we focus on one type of VANET, which is known as VDTNs. To investigate realistic communication systems based on VANET, we considered intelligent transportation systems (ITSs) and the possibility of replacing the roadside unit with VDTN. Many factors can affect the message propagation delay. When road-side units (RSUs) are present, which leads to an increase in the message delivery efficiency since RSUs can collaborate with vehicles on the road to increase the throughput of the network, we propose new methods based on environment and vehicle traffic and present a comprehensive evaluation of the newly suggested VDTN routing method. Furthermore, challenges and prospects are presented to stimulate interest in the scientific community

VDTNsim: a simulation tool for vehicular delay-tolerant networks

“Copyright © [2010] IEEE. Reprinted from 15th IEEE International Workshop on Computer-Aided Modeling Analysis and Design of Communication Links and Networks.(IEEE CAMAD 2010) ISBN:978-1-4244-7634-3. This material is posted here with permission of the IEEE. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.”Developing an adequate network architecture for supporting data communications in vehicular networks is critical to overcome the challenges caused by highly dynamic network topology, connectivity disruption, and intermittent connectivity issues. Among several approaches available in the literature proposed to address these problems, vehicular delay-tolerant networking (VDTN) architecture appears as a recent and innovative solution that integrates the concepts of end-to-end, asynchronous, and variable-length bundle oriented communication; Internet protocol over VDTN; and out-of-band signaling. VDTN architecture, protocols and services are in a fairly early stage of development. Therefore, simulation appears as an important tool providing a highly flexible, low-cost, and fast answer for research questions, and furnishes important inputs for exploring through prototyping. This paper presents and describes the proposal and construction of a simulation tool for VDTN networks, called VDTNsim.Part of this work has been supported by Instituto de Telecomunicações, Next Generation Networks and Applications Group (NetGNA), Portugal, in the framework of the Project VDTN@Lab, and by the Euro-NF Network of Excellence of the Seventh Framework Programme of EU, in the framework of the Specific Joint Research Project VDTN

Solutions for vehicular communications: a review

Vehicular networks experience a number of unique challenges due to the high mobility of vehicles and highly dynamic network topology, short contact durations, disruption intermittent connectivity, significant loss rates, node density, and frequent network fragmentation. All these issues have a profound impact on routing strategies in these networks. This paper gives an insight about available solutions on related literature for vehicular communications. It overviews and compares the most relevant approaches for data communication in these networks, discussing their influence on routing strategies. It intends to stimulate research and contribute to further advances in this rapidly evolving area where many key open issues that still remain to be addressed are identified.Part of this work has been supported by the Instituto de Telecomunicações, Next Generation Networks and Applications Group (NetGNA), Portugal, in the framework of the Project VDTN@Lab, and by the Euro-NF Network of Excellence of the Seventh Framework Programme of EU, in the framework of the Specific Joint Research Project VDTN

Hybrid routing scheme for vehicular delay tolerant networks

In Vehicular Delay Tolerant Networks (VDTN) connection from source to destination at any required period is not necessarily available. Therefore, the node with the message, save it in its own buffer and carry it until an opportunity comes across for forwarding. Fix nodes enhances the performance of VDTN. It helps in message storage and relaying messages. Due to mobility the bit error rate is high in mobile nodes connection but it is not considered in any of the previous routing schemes for VDTN. The connection between fix nodes will always have low bit error rate as compared to connection involving mobile nodes. All the pervious schemes are one dimensional. Environmental hindrances are not taken under consideration as well. Its effect can be both negative and positive. In this paper, a scheme titled Hybrid routing scheme is suggested to overcome the above stated problems. Features of another vehicular network called Vehicular Ad Hoc Networks (VANETs) are added to Maximum Priority (MaxProp) routing scheme for VDTN. Different propagation models of VANETs are implemented for both with and without mobile node communication for VDTN. The concept of bit error rate is also featured in Hybrid routing scheme. This makes Hybrid routing scheme two dimensional and more intelligent. The implementation and performance assessment of the proposed scheme is evaluated via Opportunistic Network Environment (ONE) Simulator. The Hybrid routing scheme outperform MaxProp in terms of the delivery probability and delivery delay