Adaptation of two types of processing gains for UWB impulse radio wireless sensor networks

Ultrawideband impulse radio systems offer two kinds of processing gains that can be adapted based on the interference level in the system so that quality of service requirements are fulfilled. An adaptive assignment scheme for two types of multiple-access parameters in cluster-based wireless sensor networks is investigated. A mathematical framework is developed for asynchronous communications using a Gaussian approximation method to model the multiple-access interference in two cases: one with fixed frame duration, where the goal is to increase the average throughput, and the other with fixed symbol duration, where the goal is to increase the network lifetime. Extension of the analysis to multipath channels is carried out, and the validity of the Gaussian approximation is investigated using the Kullback-Leibler distance

Ultra Wideband Impulse Radio Systems with Multiple Pulse Types

In an ultra wideband (UWB) impulse radio (IR) system, a number of pulses, each transmitted in an interval called a "frame", is employed to represent one information symbol. Conventionally, a single type of UWB pulse is used in all frames of all users. In this paper, IR systems with multiple types of UWB pulses are considered, where different types of pulses can be used in different frames by different users. Both stored-reference (SR) and transmitted-reference (TR) systems are considered. First, the spectral properties of a multi-pulse IR system with polarity randomization is investigated. It is shown that the average power spectral density is the average of the spectral contents of different pulse shapes. Then, approximate closed-form expressions for the bit error probability of a multi-pulse SR-IR system are derived for RAKE receivers in asynchronous multiuser environments. The effects of both inter-frame interference (IFI) and multiple-access interference (MAI) are analyzed. The theoretical and simulation results indicate that SR-IR systems that are more robust against IFI and MAI than a "conventional" SR-IR system can be designed with multiple types of ultra-wideband pulses. Finally, extensions to multi-pulse TR-IR systems are briefly described.Comment: To appear in the IEEE Journal on Selected Areas in Communications - Special Issue on Ultrawideband Wireless Communications: Theory and Application

Autonomous optimization of UWB link access

We present a novel approach for interference management in low data rate IR-UWB networks that enables concurrent transmissions at full power while allows each source to independently adapt its pulse rate (transmitted pulses per second) to mitigate multi-user interference. The work is motivated by the fact that the distributed adaptation of IR-UWB pulse rate has not been sufficiently addressed in the literature before. Existing approaches rely on the presence of a central authority or assume a definite receiver technique. Our approach enables users to share the communication medium in an efficient way compatible with individual QoS requirements and it is independent of any particular modulation scheme or receiver technique

An Overview on Wireless Sensor Networks Technology and Evolution

Wireless sensor networks (WSNs) enable new applications and require non-conventional paradigms for protocol design due to several constraints. Owing to the requirement for low device complexity together with low energy consumption (i.e., long network lifetime), a proper balance between communication and signal/data processing capabilities must be found. This motivates a huge effort in research activities, standardization process, and industrial investments on this field since the last decade. This survey paper aims at reporting an overview of WSNs technologies, main applications and standards, features in WSNs design, and evolutions. In particular, some peculiar applications, such as those based on environmental monitoring, are discussed and design strategies highlighted; a case study based on a real implementation is also reported. Trends and possible evolutions are traced. Emphasis is given to the IEEE 802.15.4 technology, which enables many applications of WSNs. Some example of performance characteristics of 802.15.4-based networks are shown and discussed as a function of the size of the WSN and the data type to be exchanged among nodes

Doctor of Philosophy

dissertationDevice-free localization (DFL) and tracking services are important components in security, emergency response, home and building automation, and assisted living applications where an action is taken based on a person's location. In this dissertation, we develop new methods and models to enable and improve DFL in a variety of radio frequency sensor network configurations. In the first contribution of this work, we develop a linear regression and line stabbing method which use a history of line crossing measurements to estimate the track of a person walking through a wireless network. Our methods provide an alternative approach to DFL in wireless networks where the number of nodes that can communicate with each other in a wireless network is limited and traditional DFL methods are ill-suited. We then present new methods that enable through-wall DFL when nodes in the network are in motion. We demonstrate that we can detect when a person crosses between ultra-wideband radios in motion based on changes in the energy contained in the first few nanoseconds of a measured channel impulse response. Through experimental testing, we show how our methods can localize a person through walls with transceivers in motion. Next, we develop new algorithms to localize boundary crossings when a person crosses between multiple nodes simultaneously. We experimentally evaluate our algorithms with received signal strength (RSS) measurements collected from a row of radio frequency (RF) nodes placed along a boundary and show that our algorithms achieve orders of magnitude better localization classification than baseline DFL methods. We then present a way to improve the models used in through-wall radio tomographic imaging with E-shaped patch antennas we develop and fabricate which remain tuned even when placed against a dielectric. Through experimentation, we demonstrate the E-shaped patch antennas lower localization error by 44% compared with omnidirectional and microstrip patch antennas. In our final contribution, we develop a new mixture model that relates a link's RSS as a function of a person's location in a wireless network. We develop new localization methods that compute the probabilities of a person occupying a location based on our mixture model. Our methods continuously recalibrate the model to achieve a low localization error even in changing environments

Étude d'un réseau de capteur UWB pour la localisation et la communication dans un environnement minier

Le jour n'est peut-être pas très loin où une mine pourra compter sur un système de communication sans fil pour échanger des données, transmettre des informations ou localiser des travailleurs dans le cas d'une activité normale ou en cas d'urgence. Au point de vue de la sécurité, un système de communications sans fil aurait l'avantage de localiser en temps réel un travailleur ou un engin. Les travailleurs se déplacent sans cesse dans une mine. Avec une technologie sans fil permanente, on pourrait localiser les personnes de manière relativement précise. Même en cas d'éboulement, avec une technologie adaptée, il serait possible de savoir où se trouve la personne en détresse. Notre travail de recherche s'inscrit dans la perspective du développement d'un réseau de capteurs ultra large bande (UWB) pour deux applications : l'aide à la radiolocalisation et l'extension du réseau de capteurs sans fil dans la mine. Cette étude est focalisée sur trois aspects. La première partie de notre étude consiste à étudier tous les problèmes reliés à la radiolocalisation dans la mine. Vue l'importance de cette application, nous avons mis en oeuvre un réseau de capteurs en tenant compte d'un futur déploiement dans la mine. La technologie utilisée repose sur la technologie ultra large bande. Comme il n'existe pas de travaux qui traitent ce genre de problèmes, nous avons commencé notre étude par une caractérisation du canal UWB dans les mines souterraines. Pour atteindre ces objectifs, plusieurs campagnes de mesure sur site (mine expérimentale) ont été menées. Nous sommes parvenus à une modélisation du canal de propagation et à avancer des recommandations pour aider au dimensionnement d'un réseau de capteurs dans ce type d'environnement. Dans la première partie, le but est d'étudier le problème de radiolocalisation avec les réseaux de capteurs. Notre scénario proposé serait de placer des capteurs sur chaque agent (mineur, engin). On suppose que chaque noeud (agent) qui circule à travers un réseau d'ancre maillé (déjà déployé), va extraire des informations de distance (en utilisant le critère de temps d'arrivée), ensuite il va utiliser un algorithme de positionnement distribué afin de déterminer sa propre position. Lors de cette partie nous avons aussi étudié quelques estimateurs cohérents et non-cohérents du temps d'arrivée. La caractérisation de l'erreur de mesure utilisant le temps d'arrivée dans un environnement minier a été aussi évaluée. Enfin, dans la dernière partie, nous avons analysé par simulations un déploiement d'un réseau de capteurs UWB ad hoc dans la mine. Nous avons choisi d'adopter une approche théorique afin d'évaluer les performances de cette configuration. Une conception intercouche pour un routage optimal a été étudiée. Nous avons utilisé la couche physique/réseau afin de minimiser l'énergie consommée lors de l'acheminement du données