Power supply noise reduction in 90 nm using active decap

On-chip supply voltage fluctuations are known to adversely affect performance parameters of VLSI circuits. These power supply fluctuations reduce drive capability, causes reliability issues, decrease noise margin and also adversely affect timing. Technology scaling further aggravates the problem as IR and Ldi/dt noise sources increase with each device generation. Current method used to reduce power supply variations uses an on-chip decoupling capacitors (decaps). These MOS capacitors utilize significant die area with about 15%-20% common for high-end microprocessors [4]. They also consume a considerable amount of power due to leakage and are prone to oxide breakdown during an ESD event because of reduced oxide thickness, making MOS capacitors unsuitable for technologies 90 nm and below. To improve the effectiveness of decap and reduce decap’s area, a new active decap design is proposed for 90 nm technology

Scalable Analysis, Verification and Design of IC Power Delivery

Due to recent aggressive process scaling into the nanometer regime, power delivery network design faces many challenges that set more stringent and specific requirements to the EDA tools. For example, from the perspective of analysis, simulation efficiency for large grids must be improved and the entire network with off-chip models and nonlinear devices should be able to be analyzed. Gated power delivery networks have multiple on/off operating conditions that need to be fully verified against the design requirements. Good power delivery network designs not only have to save the wiring resources for signal routing, but also need to have the optimal parameters assigned to various system components such as decaps, voltage regulators and converters. This dissertation presents new methodologies to address these challenging problems. At first, a novel parallel partitioning-based approach which provides a flexible network partitioning scheme using locality is proposed for power grid static analysis. In addition, a fast CPU-GPU combined analysis engine that adopts a boundary-relaxation method to encompass several simulation strategies is developed to simulate power delivery networks with off-chip models and active circuits. These two proposed analysis approaches can achieve scalable simulation runtime. Then, for gated power delivery networks, the challenge brought by the large verification space is addressed by developing a strategy that efficiently identifies a number of candidates for the worst-case operating condition. The computation complexity is reduced from O(2^N) to O(N). At last, motivated by a proposed two-level hierarchical optimization, this dissertation presents a novel locality-driven partitioning scheme to facilitate divide-and-conquer-based scalable wire sizing for large power delivery networks. Simultaneous sizing of multiple partitions is allowed which leads to substantial runtime improvement. Moreover, the electric interactions between active regulators/converters and passive networks and their influences on key system design specifications are analyzed comprehensively. With the derived design insights, the system-level co-design of a complete power delivery network is facilitated by an automatic optimization flow. Results show significant performance enhancement brought by the co-design

A flicker noise/IM3 cancellation technique for active mixer using negative impedance

This paper presents an approach to simultaneously cancel flicker noise and IM3 in Gilbert-type mixers, utilizing negative impedances. For proof of concept, two prototype double-balanced mixers in 0.16- m CMOS are fabricated. The first demonstration mixer chip was optimized for full IM3 cancellation and partial flicker noise cancellation; this chip achieves 9-dB flicker noise suppression, improvements of 10 dB for IIP3, 5 dB for conversion gain, and 1 dB for input P1 dB while the thermal noise increased by 0.1 dB. The negative impedance increases the power consumption for the mixer by 16% and increases the die area by 8% (46 28 m ). A second demonstration mixer chip aims at full flicker noise cancellation and partial IM3 cancellation, while operating on a low supply voltage ( 0.67 x Vdd; in this chip,the negative impedance increases the power consumption by 7.3% and increases the die area by 7% (50 20 m ). For one chip sample, measurements show 10-dB flicker noise suppression within 200% variation of the negative impedance bias current; for ten randomly selected chip samples, 11-dB flicker noise suppression is measured

Effective network grid synthesis and optimization for high performance very large scale integration system design

制度:新 ; 文部省報告番号:甲2642号 ; 学位の種類:博士(工学) ; 授与年月日:2008/3/15 ; 早大学位記番号:新480

On-Chip Power Supply Noise: Scaling, Suppression and Detection

Design metrics such as area, timing and power are generally considered as the primary criteria in the design of modern day circuits, however, the minimization of power supply noise, among other noise sources, is appreciably more important since not only can it cause a degradation in these parameters but can cause entire chips to fail. Ensuring the integrity of the power supply voltage in the power distribution network of a chip is therefore crucial to both building reliable circuits as well as preventing circuit performance degradation. Power supply noise concerns, predicted over two decades ago, continue to draw significant attention, and with present CMOS technology projected to keep on scaling, it is shown in this work that these issues are not expected to diminish. This research also considers the management and on-chip detection of power supply noise. There are various methods of managing power supply noise, with the use of decoupling capacitors being the most common technique for suppressing the noise. An in-depth analysis of decap structures including scaling effects is presented in this work with corroborating silicon results. The applicability of various decaps for given design constraints is provided. It is shown that MOS-metal hybrid structures can provide a significant increase in capacitance per unit area compared to traditional structures and will continue to be an important structure as technology continues to scale. Noise suppression by means of current shifting within the clock period of an ALU block is further shown to be an additional method of reducing the minimum voltage observed on its associated supply. A simple, and area and power efficient technique for on-chip supply noise detection is also proposed

Millimeter-Scale and Energy-Efficient RF Wireless System

This dissertation focuses on energy-efficient RF wireless system with millimeter-scale dimension, expanding the potential use cases of millimeter-scale computing devices. It is challenging to develop RF wireless system in such constrained space. First, millimeter-sized antennae are electrically-small, resulting in low antenna efficiency. Second, their energy source is very limited due to the small battery and/or energy harvester. Third, it is required to eliminate most or all off-chip devices to further reduce system dimension. In this dissertation, these challenges are explored and analyzed, and new methods are proposed to solve them. Three prototype RF systems were implemented for demonstration and verification. The first prototype is a 10 cubic-mm inductive-coupled radio system that can be implanted through a syringe, aimed at healthcare applications with constrained space. The second prototype is a 3x3x3 mm far-field 915MHz radio system with 20-meter NLOS range in indoor environment. The third prototype is a low-power BLE transmitter using 3.5x3.5 mm planar loop antenna, enabling millimeter-scale sensors to connect with ubiquitous IoT BLE-compliant devices. The work presented in this dissertation improves use cases of millimeter-scale computers by presenting new methods for improving energy efficiency of wireless radio system with extremely small dimensions. The impact is significant in the age of IoT when everything will be connected in daily life.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/147686/1/yaoshi_1.pd

Circuit and System Level Design Optimization for Power Delivery And Management

As the VLSI technology scales to the nanometer scale, power consumption has become a critical design concern of VLSI circuits. Power gating and dynamic voltage and frequency scaling (DVFS) are two effective power management techniques that are widely utilized in modern chip designs. Various design challenges merge with these power management techniques in nanometer VLSI circuits. For example, power gating introduces unique power integrity issues and trade-offs between switching noise and rush current noise. Assuring power integrity and achieving power efficiency are two highly intertwined design challenges. In addition, these trade-offs significantly vary with the supply voltage. It is difficult to use conventional power-gated power delivery networks (PDNs) to fully meet the involved conflicting design constraints while maximizing power saving and minimizing supply noise. The DVFS controller and the DC-DC power converter are two highly intertwining enablers for DVFS-based systems. However, traditional DVFS techniques treat the design optimizations of the two as separate tasks, giving rise to sub-optimal designs. To address the above research challenges, we propose several circuit and system level design optimization techniques in this dissertation. For power-gated PDN designs, we propose systemic decoupling capacitor (decap) optimization strategies that optimally trade-off between power integrity and leakage saving. First, new global decap and re-routable decap design concepts are proposed to relax the tight interaction between power integrity and leakage power saving of power-gated PDN at a single supply voltage level. Furthermore, we propose to leverage re-routable decaps to provide flexible decap allocation structures to better suit multiple supply voltage levels. The proposed strategies are implemented in an automatic design flow for choosing optimal amount of local decaps, global decaps and re-routable decaps. The proposed techniques significantly increase leakage saving without jeopardizing power integrity. The flexible decap allocations enabled by re-routable decaps lead to optimal design trade-offs for PDNs operating with two supply voltage levels. To improve the effectiveness of DVFS, we analyze the drawbacks of circuit-level only and policy-level only optimizations and the promising opportunities resulted from the cross-layer co-optimization of the DC-DC converter and online learning based DVFS polices. We present a cross-layer approach that optimizes transition time, area, energy overhead of the DC-DC converter along with key parameters of an online learning DVFS controller. We systematically evaluate the benefits of the proposed co-optimization strategy based on several processor architectures, namely single and dual-core processors and processors with DVFS and power gating. Our results indicate that the co-optimization can introduce noticeable additional energy saving without significant performance degradation

Design and Analysis of Power Distribution Networks in VLSI Circuits.

Rapidly switching currents of the on-chip devices can cause fluctuations in the supply voltage which can be classified as IR and Ldi/dt drops. The voltage fluctuations in a supply network can inject noise in a circuit which may lead to functional failures of the design. Power supply integrity verification is, therefore, a critical concern in high-performance designs. Also, with decreasing supply voltages, gate-delay is becoming increasingly sensitive to supply voltage variation. With ever-diminishing clock periods, accurate analysis of the impact of supply voltage on circuit performance has also become critical. Increasing power consumption and clock frequency have exacerbated the Ldi/dt drop in every new technology generation. The Ldi/dt drop has become the dominant portion of the overall supply-drop in high performance designs. On-die passive decap, which has traditionally been used for suppressing Ldi/dt, has become expensive due to its area and leakage power overhead. This has created an urgent need for novel circuit techniques to suppress the Ldi/dt drop in power distribution networks. We provide accurate algorithmic solutions for determining the worst-case supply-drop and the impact of supply noise on circuit performance. We propose a path-based and a block-based approach for computing the maximum circuit delay under power supply fluctuations. We also propose an early-mode supply-drop estimation approach and a statistical approach for power grid analysis. All the proposed approaches are vectorless and account for both IR and Ldi/dt drops. We also propose a performance-aware decoupling capacitance allocation technique which uses timing slacks to drive the optimization. Finally, we present analog as well as all-digital circuit techniques for inductive supply noise suppression. The proposed all-digital circuit techniques were implemented in a test-chip, fabricated in a 0.13µm CMOS process. Measurements on the test-chip demonstrate a reduction in the supply fluctuations by 57% for a ramp loads and by 75% during resonance. We also present a low-power, all-digital on-chip oscilloscope for accurate measurement of supply noise. Supply noise measurements obtained from the on-chip oscilloscope were validated to conform well to those obtained from a traditional supply-drop monitor and direct on-chip probing.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/58508/1/spant_1.pd

Modeling, Design and Optimization of IC Power Delivery with On-Chip Regulation

As IC technology continues to follow the Moore’s Law, IC designers have been constantly challenged with power delivery issues. While useful power must be reliably delivered to the on-die functional circuits to fulfill the desired functionality and performance, additional power overheads arise due to the loss associated with voltage conversion and parasitic resistance in the metal wires. Hence, one of the key IC power delivery design challenges is to develop voltage conversion/regulation circuits and the corresponding design strategies to provide a guaranteed level of power integrity while achieving high power efficiency and low area overhead. On-chip voltage regulation, a significant ongoing design trend, offers appealing active supply noise suppression close to the loads and is well positioned to address many power delivery challenges. However, to realize the full potential of on-chip voltage regulation requires systemic optimization of and tradeoffs among settling time, steady-state error, power supply noise, power efficiency, stability and area overhead, which are the key focuses of this dissertation. First, we develop new low-dropout voltage regulators (LDOs) that are well optimized for low power applications. To this end, dropout voltage, bias current and speed are important competing design objectives. This dissertation presents new flipped voltage follower (FVF) based topologies of on-chip voltage regulators that handle ultra-fast load transients in nanoseconds while achieving significant improvement on bias current consumption. An active frequency compensation is embedded to achieve high area efficiency by employing a smaller amount of compensation capacitors, the major silicon area contributor. Furthermore, in one of the proposed topologies an auxiliary digital feedback loop is employed in order to lower quiescent power consumption further. Second, coping with supply noise is becoming increasingly more difficult as design complexity grows, which leads to increased spatial and temporal load heterogeneity, and hence larger voltage variations in a given power domain. Addressing this challenge through a distributed methodology wherein multiple voltage regulators are placed across the same voltage domain is particularly promising. This distributive nature allows for even faster suppression of multiple hot spots by the nearby regulators within the power domain and can significantly boost power integrity. Nevertheless, reasoning about the stability of such distributively regulated power networks becomes rather complicated as a result of complex interactions between multiple active regulators and the large passive subnetwork. Coping with this stability challenge requires new theory and stability-ensuring design practice, as targeted by this dissertation. For the first time, we adopt and develop a hybrid stability framework for large power delivery networks with distributed voltage regulation. This framework is local in the sense that both the checking and assurance of network stability can be dealt with on the basis of each individual voltage regulator, leading to feasible design of large power delivery networks that would be computationally impossible otherwise. Accordingly, we propose a new hybrid stability margin concept, examine its tradeoffs with power efficiency, supply noise and silicon area, and demonstrate the resulted key design implications pertaining to new stability-ensuring LDO circuit design techniques and circuit topologies. Finally, we develop an automated hybrid stability design flow that is computationally efficient and provides a practical guarantee of network stability