98,599 research outputs found
Aplication of Flotran CFD in ANSYS
Simulation program ANSYS. The aerodynamic simulation
with CFD (Computational Fluid Dynamics). Finite element method
(FEM). Volume element method (VEM). The fl uid fl ow problem
is defi ned by the laws of conservation of mass, momentum, and
energy. Eight turbulence models in FLOTRAN CFD. The geometric
parameters of fl uid dynamic simulation are described by fi nite
network using many points. In ANSYS system there are two basic
elements for FLORTAN - CFD. For tasks solved in plane FLUID
141 is used and for tasks solved in space FLUID 142 is applied.
Simplifi ed modelling of net for insect with support of real constant
Analysis of microsprings for calculating the force produced by microactuators
We present models of two types of microsprings namely box-spring and zig-zag spring that can be used to measure the force generated by microactuators. The spring constant for both springs is calculated by FEM using ANSYS software. In these models, the effects of short beams that act as connectors in the spring structures are considered and analyzed by changing their width. Also, from the results, we find that the box spring appears more balanced than the zig-zag spring when the force is applied in the single central direction. A series of SDAs with box spring have been fabricated and forces ofthose SDAs have been calculated
Thermal modeling of a mini rotor-stator system
In this study the temperature increase and heat dissipation in the air gap of a cylindrical mini rotor stator system has been analyzed. A simple thermal model based on lumped parameter thermal networks has been developed. With this model the temperature dependent air properties for the fluid-rotor interaction models have been calculated. Next the complete system has also been modeled by using computational fluid dynamics (CFD) with Ansys-CFX and Ansys. The results have been compared and the capability of the thermal networks method to calculate the temperature of the air between the rotor and stator of a high speed micro rotor has been discussed
Comparision of Numerical Results with Known Solutions of Buckling Problem of Pressured Shallow Spherical Shells.
Buckling problem of pressured shallow spherical shells is studied numerically for two types of finite elements: axisymmetric and non–axisymmetric. A very good correspondence of obtained results and known solutions is revealed in the case of clamed and hinged spherical segments for both types of finite elements. The comparison of results also shows that using non–axisymmetric finite element lets one get full pre– and post–buckling equilibrium path in the range of relative deflections w=h
Recommended from our members
Design and Freeform Fabrication of Deployable Structures with Lattice Skins
Frontier environments—such as battlefields, hostile territories, remote locations, or outer
space—drive the need for lightweight, deployable structures that can be stored in a compact
configuration and deployed quickly and easily in the field. We introduce the concept of lattice
skins to enable the design, solid freeform fabrication (SFF), and deployment of customizable
structures with nearly arbitrary surface profile and lightweight multi-functionality. Using
Duraform FLEX® material in a selective laser sintering machine, large deployable structures are
fabricated in a nominal build chamber by either virtually collapsing them into a condensed form
or decomposing them into smaller parts. Before fabrication, lattice sub-skins are added
strategically beneath the surface of the part. The lattices provide elastic energy for folding and
deploying the structure or constrain expansion upon application of internal air pressure. Nearly
arbitrary surface profiles are achievable and internal space is preserved for subsequent usage. In
this paper, we present the results of a set of experimental and computational models that are
designed to provide proof of concept for lattice skins as a deployment mechanism in SFF and to
demonstrate the effect of lattice structure on deployed shape.Mechanical Engineerin
Computational modelling and experimental characterisation of heterogeneous materials
Heterogeneous materials can exhibit behaviour under load that cannot be described by classical continuum elasticity. Beams in bending can show a relative stiffening as the beam depth tends to zero, a size effect. Size effects are recognised in higher order continuum elastic theories such as micropolar elasticity. The drawback of higher order theories is the requirement of addition constitutive relations and associated properties that are often difficult to establish experimentally. Furthermore the finite element method, of great benefit in classical elasticity, has shown limitations when applied to micropolar elasticity. The determination of additional constitutive properties and the computational modelling of micropolar elasticity will be discussed in the context of a model heterogeneous material loaded in simple 3 point bending. The model material was created by drilling holes in aluminium bar in a regular pattern, with the hole axis normal to the plane of bending. The bending tests show that a size effect is present. These results are compared against modelling the detailed beam geometries in the finite element package ANSYS, which again shows the size effect. These two bending test are used to extract the additional micropolar elastic material properties. A comparison is then made against analytical solutions,numerical solutions using a micropolar beam finite element and a micropolar plane stress control volume method.It will be shown that the need for extensive experimental testing to determine the additional constitutive properties may not be necessary with the appropriate use of numerical methods
Aerated blast furnace slag filters for enhanced nitrogen and phosphorus removal from small wastewater treatment plants
Rock filters (RF) are a promising alternative technology for natural
wastewater treatment for upgrading WSP effluent. However, the application
of RF in the removal of eutrophic nutrients, nitrogen and phosphorus, is very
limited. Accordingly, the overall objective of this study was to develop a lowcost
RF system for the purpose of enhanced nutrient removal from WSP
effluents, which would be able to produce effluents which comply with the
requirements of the EU Urban Waste Water Treatment Directive (UWWTD)
(911271lEEC) and suitable for small communities. Therefore, a combination
system comprising a primary facultative pond and an aerated rock filter
(ARF) system-either vertically or horizontally loaded-was investigated at
the University of Leeds' experimental station at Esholt Wastewater
Treatment Works, Bradford, UK.
Blast furnace slag (BFS) and limestone were selected for use in the ARF
system owing to their high potential for P removal and their low cost. This
study involved three major qperiments: (1) a comparison of aerated
vertical-flow and horizontal-flow limestone filters for nitrogen removal; (2) a
comparison of aerated limestone + blast furnace slag (BFS) filter and
aerated BFS filters for nitrogen and phosphorus removal; and (3) a
comparison of vertical-flow and horizontal-flow BFS filters for nitrogen and
phosphorus removal.
The vertical upward-flow ARF system was found to be superior to the
horizontal-flow ARF system in terms of nitrogen removal, mostly thiough
bacterial nitrification processes in both the aerated limestone and BFS filter
studies. The BFS filter medium (whieh is low-cost) showed a much higher
potential in removing phosphortls from pond effluent than the limestone
medium. As a result, the combination of a vertical upward-flow ARF system
and an economical and effective P-removal filter medium, such as BFS,
was found to be an ideal optionfor the total nutrient removal of both nitrogen
and phosphorus from wastewater.
In parallel with these experiments, studies on the aerated BFS filter effective
life and major in-filter phosphorus removal pathways were carried out. From
the standard batch experiments of Pmax adsorption capacity of BFS, as well
as six-month data collection of daily average P-removal, it was found that
the effective life of the aerated BFS filter was 6.5 years. Scanning electron
microscopy and X-ray diffraction spectrometric analyses on the surface of
BFS, particulates and sediment samples revealed that the apparent
mechanisms of P-removal in the filter are adsorption on the amorphous
oxide phase of the BFS surface and precipitation within the filter
- …