A Study on Performance and Power Efficiency of Dense Non-Volatile Caches in Multi-Core Systems

In this paper, we present a novel cache design based on Multi-Level Cell Spin-Transfer Torque RAM (MLC STTRAM) that can dynamically adapt the set capacity and associativity to use efficiently the full potential of MLC STTRAM. We exploit the asymmetric nature of the MLC storage scheme to build cache lines featuring heterogeneous performances, that is, half of the cache lines are read-friendly, while the other is write-friendly. Furthermore, we propose to opportunistically deactivate ways in underutilized sets to convert MLC to Single-Level Cell (SLC) mode, which features overall better performance and lifetime. Our ultimate goal is to build a cache architecture that combines the capacity advantages of MLC and performance/energy advantages of SLC. Our experiments show an improvement of 43% in total numbers of conflict misses, 27% in memory access latency, 12% in system performance, and 26% in LLC access energy, with a slight degradation in cache lifetime (about 7%) compared to an SLC cache

Cache Equalizer: A Cache Pressure Aware Block Placement Scheme for Large-Scale Chip Multiprocessors

This paper describes Cache Equalizer (CE), a novel distributed cache management scheme for large scale chip multiprocessors (CMPs). Our work is motivated by large asymmetry in cache sets usages. CE decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Temporal pressure at the on-chip last-level cache, is continuously collected at a group (comprised of cache sets) granularity, and periodically recorded at the memory controller to guide the placement process. An incoming block is consequently placed at a cache group that exhibits the minimum pressure. CE provides Quality of Service (QoS) by robustly offering better performance than the baseline shared NUCA cache. Simulation results using a full-system simulator demonstrate that CE outperforms shared NUCA caches by an average of 15.5% and by as much as 28.5% for the benchmark programs we examined. Furthermore, evaluations manifested the outperformance of CE versus related CMP cache designs

Hardware-Oriented Cache Management for Large-Scale Chip Multiprocessors

One of the key requirements to obtaining high performance from chip multiprocessors (CMPs) is to effectively manage the limited on-chip cache resources shared among co-scheduled threads/processes. This thesis proposes new hardware-oriented solutions for distributed CMP caches. Computer architects are faced with growing challenges when designing cache systems for CMPs. These challenges result from non-uniform access latencies, interference misses, the bandwidth wall problem, and diverse workload characteristics. Our exploration of the CMP cache management problem suggests a CMP caching framework (CC-FR) that defines three main approaches to solve the problem: (1) data placement, (2) data retention, and (3) data relocation. We effectively implement CC-FR's components by proposing and evaluating multiple cache management mechanisms.Pressure and Distance Aware Placement (PDA) decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Flexible Set Balancing (FSB), on the other hand, reduces interference misses via extending the life time of cache lines through retaining some fraction of the working set at underutilized local sets to satisfy far-flung reuses. PDA implements CC-FR's data placement and relocation components and FSB applies CC-FR's retention approach.To alleviate non-uniform access latencies and adapt to phase changes in programs, Adaptive Controlled Migration (ACM) dynamically and periodically promotes cache blocks towards L2 banks close to requesting cores. ACM lies under CC-FR's data relocation category. Dynamic Cache Clustering (DCC), on the other hand, addresses diverse workload characteristics and growing non-uniform access latencies challenges via constructing a cache cluster for each core and expands/contracts all clusters synergistically to match each core's cache demand. DCC implements CC-FR's data placement and relocation approaches. Lastly, Dynamic Pressure and Distance Aware Placement (DPDA) combines PDA and ACM to cooperatively mitigate interference misses and non-uniform access latencies. Dynamic Cache Clustering and Balancing (DCCB), on the other hand, combines DCC and FSB to employ all CC-FR's categories and achieve higher system performance. Simulation results demonstrate the effectiveness of the proposed mechanisms and show that they compare favorably with related cache designs

Resource-aware scheduling for 2D/3D multi-/many-core processor-memory systems

This dissertation addresses the complexities of 2D/3D multi-/many-core processor-memory systems, focusing on two key areas: enhancing timing predictability in real-time multi-core processors and optimizing performance within thermal constraints. The integration of an increasing number of transistors into compact chip designs, while boosting computational capacity, presents challenges in resource contention and thermal management. The first part of the thesis improves timing predictability. We enhance shared cache interference analysis for set-associative caches, advancing the calculation of Worst-Case Execution Time (WCET). This development enables accurate assessment of cache interference and the effectiveness of partitioned schedulers in real-world scenarios. We introduce TCPS, a novel task and cache-aware partitioned scheduler that optimizes cache partitioning based on task-specific WCET sensitivity, leading to improved schedulability and predictability. Our research explores various cache and scheduling configurations, providing insights into their performance trade-offs. The second part focuses on thermal management in 2D/3D many-core systems. Recognizing the limitations of Dynamic Voltage and Frequency Scaling (DVFS) in S-NUCA many-core processors, we propose synchronous thread migrations as a thermal management strategy. This approach culminates in the HotPotato scheduler, which balances performance and thermal safety. We also introduce 3D-TTP, a transient temperature-aware power budgeting strategy for 3D-stacked systems, reducing the need for Dynamic Thermal Management (DTM) activation. Finally, we present 3QUTM, a novel method for 3D-stacked systems that combines core DVFS and memory bank Low Power Modes with a learning algorithm, optimizing response times within thermal limits. This research contributes significantly to enhancing performance and thermal management in advanced processor-memory systems

The ZCache: Decoupling Ways and Associativity

Abstract—The ever-increasing importance of main memory latency and bandwidth is pushing CMPs towards caches with higher capacity and associativity. Associativity is typically im-proved by increasing the number of ways. This reduces conflict misses, but increases hit latency and energy, placing a stringent trade-off on cache design. We present the zcache, a cache design that allows much higher associativity than the number of physical ways (e.g. a 64-associative cache with 4 ways). The zcache draws on previous research on skew-associative caches and cuckoo hashing. Hits, the common case, require a single lookup, incurring the latency and energy costs of a cache with a very low number of ways. On a miss, additional tag lookups happen off the critical path, yielding an arbitrarily large number of replacement candidates for the incoming block. Unlike conventional designs, the zcache provides associativity by increasing the number of replacement candidates, but not the number of cache ways. To understand the implications of this approach, we develop a general analysis framework that allows to compare associativity across different cache designs (e.g. a set-associative cache and a zcache) by representing associativity as a probability distribution. We use this framework to show that for zcaches, associativity depends only on the number of replacement candidates, and is independent of other factors (such as the number of cache ways or the workload). We also show that, for the same number of replacement candidates, the associativity of a zcache is superior than that of a set-associative cache for most workloads. Finally, we perform detailed simulations of multithreaded and multiprogrammed workloads on a large-scale CMP with zcache as the last-level cache. We show that zcaches provide higher performance and better energy efficiency than conventional caches without incurring the overheads of designs with a large number of ways. I

Revisiting LP-NUCA Energy Consumption: Cache Access Policies and Adaptive Block Dropping

Cache working-set adaptation is key as embedded systems move to multiprocessor and Simultaneous Multithreaded Architectures (SMT) because interthread pollution harms system performance and battery life. Light-Power NUCA (LP-NUCA) is a working-set adaptive cache that depends on temporal-locality to save energy. This work identifies the sources of energy waste in LP-NUCAs: parallel access to the tag and data arrays of the tiles and low locality phases with useless block migration. To counteract both issues, we prove that switching to serial access reduces energy without harming performance and propose a machine learning Adaptive Drop Rate (ADR) controller that minimizes the amount of replacement and migration when locality is low. This work demonstrates that these techniques efficiently adapt the cache drop and access policies to save energy. They reduce LP-NUCA consumption 22.7% for 1SMT. With interthread cache contention in 2SMT, the savings rise to 29%. Versus a conventional organization, energy--delay improves 20.8% and 25% for 1- and 2SMT benchmarks, and, in 65% of the 2SMT mixes, gains are larger than 20%

Scalable Task Schedulers for Many-Core Architectures

This thesis develops schedulers for many-cores with different optimization objectives. The proposed schedulers are designed to be scale up as the number of cores in many-cores increase while continuing to provide guarantees on the quality of the schedule

Doctor of Philosophy

dissertationIn recent years, a number of trends have started to emerge, both in microprocessor and application characteristics. As per Moore's law, the number of cores on chip will keep doubling every 18-24 months. International Technology Roadmap for Semiconductors (ITRS) reports that wires will continue to scale poorly, exacerbating the cost of on-chip communication. Cores will have to navigate an on-chip network to access data that may be scattered across many cache banks. The number of pins on the package, and hence available off-chip bandwidth, will at best increase at sublinear rate and at worst, stagnate. A number of disruptive memory technologies, e.g., phase change memory (PCM) have begun to emerge and will be integrated into the memory hierarchy sooner than later, leading to non-uniform memory access (NUMA) hierarchies. This will make the cost of accessing main memory even higher. In previous years, most of the focus has been on deciding the memory hierarchy level where data must be placed (L1 or L2 caches, main memory, disk, etc.). However, in modern and future generations, each level is getting bigger and its design is being subjected to a number of constraints (wire delays, power budget, etc.). It is becoming very important to make an intelligent decision about where data must be placed within a level. For example, in a large non-uniform access cache (NUCA), we must figure out the optimal bank. Similarly, in a multi-dual inline memory module (DIMM) non uniform memory access (NUMA) main memory, we must figure out the DIMM that is the optimal home for every data page. Studies have indicated that heterogeneous main memory hierarchies that incorporate multiple memory technologies are on the horizon. We must develop solutions for data management that take heterogeneity into account. For these memory organizations, we must again identify the appropriate home for data. In this dissertation, we attempt to verify the following thesis statement: "Can low-complexity hardware and OS mechanisms manage data placement within each memory hierarchy level to optimize metrics such as performance and/or throughput?" In this dissertation we argue for a hardware-software codesign approach to tackle the above mentioned problems at different levels of the memory hierarchy. The proposed methods utilize techniques like page coloring and shadow addresses and are able to handle a large number of problems ranging from managing wire-delays in large, shared NUCA caches to distributing shared capacity among different cores. We then examine data-placement issues in NUMA main memory for a many-core processor with a moderate number of on-chip memory controllers. Using codesign approaches, we achieve efficient data placement by modifying the operating system's (OS) page allocation algorithm for a wide variety of main memory architectures

Scale-Out Processors

Global-scale online services, such as Google’s Web search and Facebook’s social networking, run in large-scale datacenters. Due to their massive scale, these services are designed to scale out (or distribute) their respective loads and datasets across thousands of servers in datacenters. The growing demand for online services forced service providers to build networks of datacenters, which require an enormous capital outlay for infrastructure, hardware, and power consumption. Consequently, efficiency has become a major concern in the design and operation of such datacenters, with processor efficiency being of, utmost importance, due to the significant contribution of processors to the overall datacenter performance and cost. Scale-out workloads, which are behind today’s online services, serve independent requests, and have large instruction footprints and little data locality. As such, they benefit from processor designs that feature many cores and a modestly sized Last-Level Cache (LLC), a fast access path to the LLC, and high-bandwidth interfaces to memory. Existing server-class processors with large LLCs and a handful of aggressive out-of-order cores are inefficient in executing scale-out workloads. Moreover, the scaling trajectory for these processors leads to even lower efficiency in future technology nodes. This thesis presents a family of throughput-optimal processors, called Scale-Out Processors, for the efficient execution of scale-out workloads. A unique feature of Scale-Out Processors is that they consist of multiple stand-alone modules, called pods, wherein each module is a server running an operating system and a full software stack. To design a throughput-optimal processor, we developed a methodology based on performance density, defined as throughput per unit area, to quantify how effectively an architecture uses the silicon real estate. The proposed methodology derives a performance-density optimal processor building block (i.e., pod), which tightly couples a number of cores to a small LLC via a fast interconnect. Scale-Out Processors simply consist of multiple pods with no inter-pod connectivity or coherence. Moreover, they deliver the highest throughput in today’s technology and afford near-ideal scalability as process technology advances. We demonstrate that Scale-Out Processors improve datacenters’ efficiency by 4.4x-7.1x over datacenters designed using existing server-class processors

Scalable Emulation of Heterogeneous Systems

The breakdown of Dennard's transistor scaling has driven computing systems toward application-specific accelerators, which can provide orders-of-magnitude improvements in performance and energy efficiency over general-purpose processors. To enable the radical departures from conventional approaches that heterogeneous systems entail, research infrastructure must be able to model processors, memory and accelerators, as well as system-level changes---such as operating system or instruction set architecture (ISA) innovations---that might be needed to realize the accelerators' potential. Unfortunately, existing simulation tools that can support such system-level research are limited by the lack of fast, scalable machine emulators to drive execution. To fill this need, in this dissertation we first present a novel machine emulator design based on dynamic binary translation that makes the following improvements over the state of the art: it scales on multicore hosts while remaining memory efficient, correctly handles cross-ISA differences in atomic instruction semantics, leverages the host floating point (FP) unit to speed up FP emulation without sacrificing correctness, and can be efficiently instrumented to---among other possible uses---drive the execution of a full-system, cross-ISA simulator with support for accelerators. We then demonstrate the utility of machine emulation for studying heterogeneous systems by leveraging it to make two additional contributions. First, we quantify the trade-offs in different coupling models for on-chip accelerators. Second, we present a technique to reuse the private memories of on-chip accelerators when they are otherwise inactive to expand the system's last-level cache, thereby reducing the opportunity cost of the accelerators' integration