15,754 research outputs found
Collaborative simulation method with spatiotemporal synchronization process control
When designing a complex mechatronics system, such as high speed trains, it is relatively difficult to effectively simulate the entire system’s dynamic behaviors because it involves multi-disciplinary subsystems. Currently, a most practical approach for multi-disciplinary simulation is interface based coupling simulation method, but it faces a twofold challenge: spatial and time unsynchronizations among multi-directional coupling simulation of subsystems. A new collaborative simulation method with spatiotemporal synchronization process control is proposed for coupling simulating a given complex mechatronics system across multiple subsystems on different platforms. The method consists of 1) a coupler-based coupling mechanisms to define the interfacing and interaction mechanisms among subsystems, and 2) a simulation process control algorithm to realize the coupling simulation in a spatiotemporal synchronized manner. The test results from a case study show that the proposed method 1) can certainly be used to simulate the sub-systems interactions under different simulation conditions in an engineering system, and 2) effectively supports multi-directional coupling simulation among multi-disciplinary subsystems. This method has been successfully applied in China high speed train design and development processes, demonstrating that it can be applied in a wide range of engineering systems design and simulation with improved efficiency and effectiveness
Recommended from our members
Design Space Exploration in Cyber-Physical Systems
Cyber physical systems (CPS) integrate a variety of engineering areas such as control, mechanical and computer engineering in a holistic design effort. While interdependencies between the different disciplines are key attributes of CPS design science, little is known about the impact of design decisions of the cyber part on the overall system qualities. To investigate these interdependencies, this paper proposes a simulation-based Design Space Exploration (DSE) framework that considers detailed cyber system parameters such as cache size, bus width, and voltage levels in addition to physical and control parameters of the CPS. We propose an exploration algorithm that surfs the parameter configurations in the cyber physical sub-systems, in order to approximate the Pareto-optimal design points with regards to the trade-os among the design objectives, such as energy consumption and control stability. We apply the proposed framework to a network control system for an inverted-pendulum application. The presented holistic evaluation of the identified Pareto-points reveals the presence of non-trivial trade-os, which are imposed by the control, physical, and detailed cyber parameters. For instance the identified energy and control optimal design points comprise configurations with a wide range of CPU speeds, sample times and cache configuration following non-trivial zig-zag patterns. The proposed framework could identify and manage those trade-os and, as a result, is an imperative rst step to automate the search for superior CSP configurations
APPROXIMATION ASSISTED MULTIOBJECTIVE AND COLLABORATIVE ROBUST OPTIMIZATION UNDER INTERVAL UNCERTAINTY
Optimization of engineering systems under uncertainty often involves problems that have multiple objectives, constraints and subsystems. The main goal in these problems is to obtain solutions that are optimum and relatively insensitive to uncertainty. Such solutions are called robust optimum solutions. Two classes of such problems are considered in this dissertation. The first class involves Multi-Objective Robust Optimization (MORO) problems under interval uncertainty. In this class, an entire system optimization problem, which has multiple nonlinear objectives and constraints, is solved by a multiobjective optimizer at one level while robustness of trial alternatives generated by the optimizer is evaluated at the other level. This bi-level (or nested) MORO approach can become computationally prohibitive as the size of the problem grows. To address this difficulty, a new and improved MORO approach under interval uncertainty is developed. Unlike the previously reported bi-level MORO methods, the improved MORO performs robustness evaluation only for optimum solutions and uses this information to iteratively shrink the feasible domain and find the location of robust optimum solutions. Compared to the previous bi-level approach, the improved MORO significantly reduces the number of function calls needed to arrive at the solutions. To further improve the computational cost, the improved MORO is combined with an online approximation approach. This new approach is called Approximation-Assisted MORO or AA-MORO.
The second class involves Multiobjective collaborative Robust Optimization (McRO) problems. In this class, an entire system optimization problem is decomposed hierarchically along user-defined domain specific boundaries into system optimization problem and several subsystem optimization subproblems. The dissertation presents a new Approximation-Assisted McRO (AA-McRO) approach under interval uncertainty. AA-McRO uses a single-objective optimization problem to coordinate all system and subsystem optimization problems in a Collaborative Optimization (CO) framework. The approach converts the consistency constraints of CO into penalty terms which are integrated into the subsystem objective functions. In this way, AA-McRO is able to explore the design space and obtain optimum design solutions more efficiently compared to a previously reported McRO.
Both AA-MORO and AA-McRO approaches are demonstrated with a variety of numerical and engineering optimization examples. It is found that the solutions from both approaches compare well with the previously reported approaches but require a significantly less computational cost. Finally, the AA-MORO has been used in the development of a decision support system for a refinery case study in order to facilitate the integration of engineering and business decisions using an agent-based approach
Occupational health and safety issues in human-robot collaboration: State of the art and open challenges
Human-Robot Collaboration (HRC) refers to the interaction of workers and robots in a shared workspace. Owing to the integration of the industrial automation strengths with the inimitable cognitive capabilities of humans, HRC is paramount to move towards advanced and sustainable production systems. Although the overall safety of collaborative robotics has increased over time, further research efforts are needed to allow humans to operate alongside robots, with awareness and trust. Numerous safety concerns are open, and either new or enhanced
technical, procedural and organizational measures have to be investigated to design and implement inherently safe and ergonomic automation solutions, aligning the systems performance and the human safety. Therefore, a bibliometric analysis and a literature review are carried out in the present paper to provide a comprehensive overview of Occupational Health and Safety (OHS) issues in HRC. As a result, the most researched topics and application areas, and the possible future lines of research are identified. Reviewed articles stress the central role
played by humans during collaboration, underlining the need to integrate the human factor in the hazard analysis and risk assessment. Human-centered design and cognitive engineering principles also require further investigations to increase the worker acceptance and trust during collaboration. Deepened studies are compulsory in the healthcare sector, to investigate the social and ethical implications of HRC. Whatever the application context is, the implementation of more and more advanced technologies is fundamental to overcome the current HRC safety concerns, designing low-risk HRC systems while ensuring the system productivity
An agent-based fuzzy cognitive map approach to the strategic marketing planning for industrial firms
This is the post-print version of the final paper published in Industrial Marketing Management. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2013 Elsevier B.V.Industrial marketing planning is a typical example of an unstructured decision making problem due to the large number of variables to consider and the uncertainty imposed on those variables. Although abundant studies identified barriers and facilitators of effective industrial marketing planning in practice, the literature still lacks practical tools and methods that marketing managers can use for the task. This paper applies fuzzy cognitive maps (FCM) to industrial marketing planning. In particular, agent based inference method is proposed to overcome dynamic relationships, time lags, and reusability issues of FCM evaluation. MACOM simulator also is developed to help marketing managers conduct what-if scenarios to see the impacts of possible changes on the variables defined in an FCM that represents industrial marketing planning problem. The simulator is applied to an industrial marketing planning problem for a global software service company in South Korea. This study has practical implication as it supports marketing managers for industrial marketing planning that has large number of variables and their cause–effect relationships. It also contributes to FCM theory by providing an agent based method for the inference of FCM. Finally, MACOM also provides academics in the industrial marketing management discipline with a tool for developing and pre-verifying a conceptual model based on qualitative knowledge of marketing practitioners.Ministry of Education, Science and Technology (Korea
- …