Reliable Multicast transport of the video over the WiFi network

Le transport multicast est une solution efficace pour envoyer le même contenu à plusieurs récepteurs en même temps. Ce mode est principalement utilisé pour fournir des flux multimédia en temps réel. Cependant, le multicast classique de l IEEE 802.11 n'utilise aucun mécanisme d acquittement. Ainsi, l échec de réception implique la perte définitive du paquet. Cela limite la fiabilité du transport multicast et impact la qualité des applications vidéo. Pour résoudre ce problème, 802.11v et 802.11aa sont définis récemment. Le premier amendement propose Direct Multicast Service (DMS). D'autre part, le 802.11aa introduit GroupCast with Retries (GCR). GCR définit deux nouvelles politiques de retransmission : Block Ack (BACK) et Unsolicited Retry (UR).Dans cette thèse, nous évaluons et comparons les performances de 802.11v/aa. Nos résultats montrent que tous les nouveaux protocoles multicast génèrent un overhead de transmission important. En outre, DMS a une scalabilité très limitée, et GCR-BACK n'est pas approprié pour des grands groupes multicast. D autre part, nous montrons que DMS et GCR-BACK génèrent des latences de transmission importantes lorsque le nombre de récepteurs augmente. Par ailleurs, nous étudions les facteurs de pertes dans les réseaux sans fil. Nous montrons que l'indisponibilité du récepteur peut être la cause principale des pertes importantes et de leur nature en rafales. En particulier, nos résultats montrent que la surcharge du processeur peut provoquer un taux de perte de 100%, et que le pourcentage de livraison peut être limité à 35% lorsque la carte 802.11 est en mode d économie d'énergie.Pour éviter les collisions et améliorer la fiabilité du transport multicast, nous définissons le mécanisme Busy Symbol (BS). Nos résultats montrent que BS évite les collisions et assure un taux de succès de transmission très important. Afin d'améliorer davantage la fiabilité du trafic multicast, nous définissons un nouveau protocole multicast, appelé Block Negative Acknowledgement (BNAK). Ce protocole opère comme suit. L AP envoi un bloc de paquets suivi par un Block NAK Request (BNR). Le BNR permet aux membres de détecter les données manquantes et d envoyer une demande de retransmission, c.à.d. un Block NAK Response (BNAK). Un BNAK est transmis en utilisant la procédure classique d accès au canal afin d'éviter toute collision avec d'autres paquets. En plus, cette demande est acquittée. Sous l'hypothèse que 1) le récepteur est situé dans la zone de couverture du débit de transmission utilisé, 2) les collisions sont évitées et 3) le terminal a la bonne configuration, très peu de demandes de retransmission sont envoyées, et la bande passante est préservée. Nos résultats montrent que BNAK a une très grande scalabilité et génère des délais très limités. En outre, nous définissons un algorithme d'adaptation de débit pour BNAK. Nous montrons que le bon débit de transmission est sélectionné moyennant un overhead très réduit de moins de 1%. En plus, la conception de notre protocole supporte la diffusion scalable de lavvidéo. Cette caractéristique vise à résoudre la problématique de la fluctuation de la bande passante, et à prendre en considération l'hétérogénéité des récepteurs dans un réseau sans fil.The multicast transport is an efficient solution to deliver the same content to many receivers at the same time. This mode is mainly used to deliver real-time video streams. However, the conventional multicast transmissions of IEEE 802.11 do not use any feedback policy. Therefore missing packets are definitely lost. This limits the reliability of the multicast transport and impacts the quality of the video applications. To resolve this issue, the IEEE 802.11v/aa amendments have been defined recently. The former proposes the Direct Multicast Service (DMS). On the other hand, 802.11aa introduces Groupcast with Retries (GCR) service. GCR defines two retry policies: Block Ack (BACK) and Unsolicited Retry (UR).In this thesis we evaluate and compare the performance of 802.11v/aa. Our simulation results show that all the defined policies incur an important overhead. Besides, DMS has a very limited scalability, and GCR-BACK is not appropriate for large multicast groups. We show that both DMS and GCR-BACK incur important transmission latencies when the number of the multicast receivers increases. Furthermore, we investigate the loss factors in wireless networks. We show that the device unavailability may be the principal cause of the important packet losses and their bursty nature. Particularly, our results show that the CPU overload may incur a loss rate of 100%, and that the delivery ratio may be limited to 35% when the device is in the power save mode.To avoid the collisions and to enhance the reliability of the multicast transmissions, we define the Busy Symbol (BS) mechanism. Our results show that BS prevents all the collisions and ensures a very high delivery ratio for the multicast packets. To further enhance the reliability of this traffic, we define the Block Negative Acknowledgement (BNAK) retry policy. Using our protocol, the AP transmits a block of multicast packets followed by a Block NAK Request (BNR). Upon reception of a BNR, a multicast member generates a Block NAK Response (BNAK) only if it missed some packets. A BNAK is transmitted after channel contention in order to avoid any eventual collision with other feedbacks, and is acknowledged. Under the assumption that 1) the receiver is located within the coverage area of the used data rate, 2) the collisions are avoided and 3) the terminal has the required configuration, few feedbacks are generated and the bandwidth is saved. Our results show that BNAK has a very high scalability and incurs very low delays. Furthermore, we define a rate adaptation scheme for BNAK. We show that the appropriate rate is selected on the expense of a very limited overhead of less than 1%. Besides, the conception of our protocol is defined to support the scalable video streaming. This capability intends to resolve the bandwidth fluctuation issue and to consider the device heterogeneity of the group members.BORDEAUX1-Bib.electronique (335229901) / SudocSudocFranceF

Video QoS/QoE over IEEE802.11n/ac: A Contemporary Survey

The demand for video applications over wireless networks has tremendously increased, and IEEE 802.11 standards have provided higher support for video transmission. However, providing Quality of Service (QoS) and Quality of Experience (QoE) for video over WLAN is still a challenge due to the error sensitivity of compressed video and dynamic channels. This thesis presents a contemporary survey study on video QoS/QoE over WLAN issues and solutions. The objective of the study is to provide an overview of the issues by conducting a background study on the video codecs and their features and characteristics, followed by studying QoS and QoE support in IEEE 802.11 standards. Since IEEE 802.11n is the current standard that is mostly deployed worldwide and IEEE 802.11ac is the upcoming standard, this survey study aims to investigate the most recent video QoS/QoE solutions based on these two standards. The solutions are divided into two broad categories, academic solutions, and vendor solutions. Academic solutions are mostly based on three main layers, namely Application, Media Access Control (MAC) and Physical (PHY) which are further divided into two major categories, single-layer solutions, and cross-layer solutions. Single-layer solutions are those which focus on a single layer to enhance the video transmission performance over WLAN. Cross-layer solutions involve two or more layers to provide a single QoS solution for video over WLAN. This thesis has also presented and technically analyzed QoS solutions by three popular vendors. This thesis concludes that single-layer solutions are not directly related to video QoS/QoE, and cross-layer solutions are performing better than single-layer solutions, but they are much more complicated and not easy to be implemented. Most vendors rely on their network infrastructure to provide QoS for multimedia applications. They have their techniques and mechanisms, but the concept of providing QoS/QoE for video is almost the same because they are using the same standards and rely on Wi-Fi Multimedia (WMM) to provide QoS

QoS provisioning and mobility management for IP-based wireless LAN

Today two major technological forces drive the telecommunication era: the wireless cellular systems and the Internet. As these forces converge, the demand for new services, increasing bandwidth and ubiquitous connectivity continuously grows. The next-generation mobile systems will be based solely or in a large extent, on the Internet Protocol (IP). This thesis begins by addressing the problems and challenges faced in a multimedia, IP-based Wireless LAN environment. The ETSI HiperLAN/2 system has been mainly selected as the test wireless network for our theoretical and simulation experiments. Apart from the simulations, measurements have been taken from real life test scenarios, where the IEEE 802.11 system was used (UniS Test-bed). Furthermore, a brief overview of the All-IP network infrastructure is presented. An extension to the conventional wireless (cellular) architecture, which takes advantage of the IP network characteristics, is considered. Some of the trends driving the 3G and WLANs developments are explored, while the provision of quality of service on the latter for real-time and non-real-time multimedia services is investigated, simulated and evaluated. Finally, an efficient and catholic Q0S framework is proposed. At the same time, the multimedia services should be offered in a seamless and uninterrupted manner to users who access the all-IP infrastructure via a WLAN, meeting the demands of both enterprise and public environments anywhere and anytime. Thus providing support for mobile communications not only in terms of terminal mobility, as is currently the case, but also for session, service and personal mobility. Furthermore, this mobility should be available over heterogeneous networks, such as WLANs, IJMTS, as well as fixed networks. Therefore, this work investigates issues such as, multilayer and multi-protocol (SIP-Mobile IP-Cellular IP) mobility management in wireless LAN and 3G domains. Several local and global mobility protocols and architectures have been tested and evaluated and a complete mobility management framework is proposed. Moreover, integration of simple yet efficient authentication, accounting and authorisation mechanisms with the multimedia service architecture is an important issue of IP-based WLANs. Without such integration providers will not have the necessary means to control their provided services and make revenue from the users. The proposed AAA architecture should support a robust AAA infrastructure providing secure, fast and seamless access granting to multimedia services. On the other hand, a user wishing a service from the All-IP WLAN infrastructure needs to be authenticated twice, once to get access to the network and the other one should be granted for the required service. Hence, we provide insights into these issues by simulating and evaluating pre-authentication techniques and other network authentication scenarios based on the wellknown IEEE 802.lx protocol for multimedia IP-based WLANs.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Improving packet delivery efficiency using multi-radio diversity in wireless LANs

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2006.Includes bibliographical references (p. 115-120).Data transmissions in Wireless Local Area Networks (WLANs) often suffer from bit errors that arise from the notoriously complex and time-varying signal propagation characteristics of the wireless medium. A number of physical factors such as attenuation and multi-path are prevalent indoors and can lead to high bit-error rates at the link layer. These in turn lead to packet losses, low throughput, and higher and more variable packet latencies observed at higher layers, degrading the performance of many delay-sensitive and traffic-intensive wireless applications such as games, file-sharing, voice-over-IP, and streaming video. We use the notion of path diversity to develop an approach that improves data delivery efficiency and throughput in presence of transmission errors. Path diversity relies on multiple access points (APs) covering a given area or multiple radios on the user's device (or both). The hypothesis underlying this system is as follows: because frame errors are often path-dependent (e.g., due to multi-path fading), location-dependent (e.g., due to noise), and statistically independent between different transmitting radios, transmissions are likely to succeed from at least one of the available transmitters (transmit diversity).(cont.) Likewise, multiple radios that all receive versions of the same transmission may together be able to correctly recover a frame, even when any given individual radio is not (receive diversity). Using these principles, we design and implement the Multi-Radio Diversity (MRD) system, which leverages the properties of path diversity at the transmitter and receiver to reduce frame loss rates in the link-layer, leading to increased throughput and packet delivery efficiency. We introduce several techniques that make path selection, retransmission, and rate adaptation work efficiently in a MRD system based on the 802.11 MAC. We used commodity PCs and wireless interfaces to build a MRD system and conducted a wide range of indoor experiments. Our experiments measured throughput gains up to three times over conventional schemes without consuming much extra wireless bandwidth.by Allen Ka Lun Miu.Ph.D

Transmission rate sampling and selection for reliable wireless multicast

The multicast communication concept offers a scalable and efficient method for many classes of applications; however, its potential remains largely unexploited when it comes to link-layer multicasting in wireless local area networks. The fundamental lacking feature for this is a transmission rate control mechanism that offers higher transmission performance and lower channel utilization, while ensuring the reliability of wireless multicast transmissions. This is much harder to achieve in a scalable manner for multicast when compared with unicast transmissions, which employs explicit acknowledgment mechanisms for rate control. This article introduces EWRiM, a reliable multicast transmission rate control protocol for IEEE 802.11 networks. It adapts the transmission rate sampling concept to multicast through an aggregated receiver feedback scheme and combines it with a sliding window forward error correction (FEC) mechanism for ensuring reliability at the link layer. An inherent novelty of EWRiM is the close interaction of its FEC and transmission rate selection components to address the performance-reliability tradeoff in multicast communications. The performance of EWRiM was tested in three scenarios with intrinsically different traffic patterns; namely, music streaming scenario, large data frame delivery scenario, and an IoT scenario with frequent distribution of small data packets. Evaluation results demonstrate that the proposed approach adapts well to all of these realistic multicast traffic scenarios and provides significant improvements over the legacy multicast- and unicast-based transmissions.DFG, 414044773, Open Access Publizieren 2019 - 2020 / Technische Universität Berli

Security and Privacy Issues in Wireless Mesh Networks: A Survey

This book chapter identifies various security threats in wireless mesh network (WMN). Keeping in mind the critical requirement of security and user privacy in WMNs, this chapter provides a comprehensive overview of various possible attacks on different layers of the communication protocol stack for WMNs and their corresponding defense mechanisms. First, it identifies the security vulnerabilities in the physical, link, network, transport, application layers. Furthermore, various possible attacks on the key management protocols, user authentication and access control protocols, and user privacy preservation protocols are presented. After enumerating various possible attacks, the chapter provides a detailed discussion on various existing security mechanisms and protocols to defend against and wherever possible prevent the possible attacks. Comparative analyses are also presented on the security schemes with regards to the cryptographic schemes used, key management strategies deployed, use of any trusted third party, computation and communication overhead involved etc. The chapter then presents a brief discussion on various trust management approaches for WMNs since trust and reputation-based schemes are increasingly becoming popular for enforcing security in wireless networks. A number of open problems in security and privacy issues for WMNs are subsequently discussed before the chapter is finally concluded.Comment: 62 pages, 12 figures, 6 tables. This chapter is an extension of the author's previous submission in arXiv submission: arXiv:1102.1226. There are some text overlaps with the previous submissio

Real-time wireless networks for industrial control systems

The next generation of industrial systems (Industry 4.0) will dramatically transform manyproductive sectors, integrating emerging concepts such as Internet of Things, artificialintelligence, big data, cloud robotics and virtual reality, to name a few. Most of thesetechnologies heavily rely on the availability of communication networks able to offernearly–istantaneous, secure and reliable data transfer. In the industrial sector, these tasks are nowadays mainly accomplished by wired networks, that combine the speed ofoptical fiber media with collision–free switching technology. However, driven by the pervasive deployment of mobile devices for personal com-munications in the last years, more and more industrial applications require wireless connectivity, which can bring enormous advantages in terms of cost reduction and flex-ibility. Designing timely, reliable and deterministic industrial wireless networks is a complicated task, due to the nature of the wireless channel, intrinsically error–prone andshared among all the devices transmitting on the same frequency band. In this thesis, several solutions to enhance the performance of wireless networks employed in industrial control applications are proposed. The presented approaches differ in terms of achieved performance and target applications, but they are all characterized by an improvement over existing industrial wireless solutions in terms of timeliness, reliability and determinism. When possible, an experimental validation of the designed solutions is provided. The obtained results prove that significant performance improvements are already possible, often using commercially available devices and preserving compliance to existing standards. Future research efforts, combined with the availability of new chipsets and standards, could lead to a world where wireless links effectively replace most of the existing cables in industrial environments, as it is already the case in the consumer market

WISE Abstraction Framework for Wireless Networks

Current wireless networks commonly consist of nodes with different capabilities (e.g., laptops and PDAs). Link quality such as link error rate and data transmit rate can differ widely. For efficient operation, the design of wireless networks must take into account such heterogeneity among nodes and wireless links. We present systematic approaches to overcome problems due to heterogeneous node capability and link quality in wireless networks. We first present a general framework called WISE (Wireless Integration Sublayer Extension) that abstracts specific details of low-level wireless communication technologies (e.g., modulation or backoff scheme). WISE provides a set of common primitives, based on which upper-level protocols can operate efficiently without knowing the underlying details. We also present a number of protocol extensions that employ the WISE framework to enhance the performance of specific upper-level protocols while hiding lower-level heterogeneity (e.g., link error rate). Our multihop WLAN architecture improves system performance by allowing client nodes to use multihop paths via other clients to reach an AP. Our geographic routing extension considers both location and link quality in the next hop selection, which leads to optimal paths under certain conditions. To address heterogeneity in node capability, we consider virtual routing backbone construction in two settings: cooperative and selfish. In the cooperative setting, we present a protocol extension that constructs an optimal backbone composed of a small number of high-capability nodes, which can be generalized to a more resilient backbone. For the selfish case, we use game theory and design an incentive-compatible backbone construction scheme. We evaluate our work from multiple perspectives. We use theoretical analysis to prove that our extensions lead to optimal solutions. We use simulations to experiment with our schemes in various scenarios and real-world implementation to understand the performance in practice. Our experiment results show that our schemes significantly outperform existing schemes