194 research outputs found
Survey on Current State-of-the-Art in Needle Insertion Robots: Open Challenges for Application in Real Surgery
AbstractMinimally invasive percutaneous treatment robots have become a popular area in medical robotics. Minimally invasive treatments are an important part of modern surgery; however percutaneous treatments are a difficult procedure for surgeons. They must carry out a procedure that has limited visibility, tool maneuverability and where the target and tissue surrounding it move because of the tool. Robot technology can overcome those limitations and increase the success of minimally invasive percutaneous treatment. In this paper we will present a review of the current state-of-the-art in robotic insertion needle for minimally invasive treatments, focusing on the limitations and challenges still open for their use in clinical application
InterNAV3D: A Navigation Tool for Robot-Assisted Needle-Based Intervention for the Lung
Lung cancer is one of the leading causes of cancer deaths in North America. There are recent advances in cancer treatment techniques that can treat cancerous tumors, but require a real-time imaging modality to provide intraoperative assistive feedback. Ultrasound (US) imaging is one such modality. However, while its application to the lungs has been limited because of the deterioration of US image quality (due to the presence of air in the lungs); recent work has shown that appropriate lung deflation can help to improve the quality sufficiently to enable intraoperative, US-guided robotics-assisted techniques to be used. The work described in this thesis focuses on this approach.
The thesis describes a project undertaken at Canadian Surgical Technologies and Advanced Robotics (CSTAR) that utilizes the image processing techniques to further enhance US images and implements an advanced 3D virtual visualization software approach. The application considered is that for minimally invasive lung cancer treatment using procedures such as brachytherapy and microwave ablation while taking advantage of the accuracy and teleoperation capabilities of surgical robots, to gain higher dexterity and precise control over the therapy tools (needles and probes). A number of modules and widgets are developed and explained which improve the visibility of the physical features of interest in the treatment and help the clinician to have more reliable and accurate control of the treatment. Finally the developed tools are validated with extensive experimental evaluations and future developments are suggested to enhance the scope of the applications
Biomechanical Modeling and Inverse Problem Based Elasticity Imaging for Prostate Cancer Diagnosis
Early detection of prostate cancer plays an important role in successful prostate cancer treatment. This requires screening the prostate periodically after the age of 50. If screening tests lead to prostate cancer suspicion, prostate needle biopsy is administered which is still considered as the clinical gold standard for prostate cancer diagnosis. Given that needle biopsy is invasive and is associated with issues including discomfort and infection, it is desirable to develop a prostate cancer diagnosis system that has high sensitivity and specificity for early detection with a potential to improve needle biopsy outcome. Given the complexity and variability of prostate cancer pathologies, many research groups have been pursuing multi-parametric imaging approach as no single modality imaging technique has proven to be adequate. While imaging additional tissue properties increases the chance of reliable prostate cancer detection and diagnosis, selecting an additional property needs to be done carefully by considering clinical acceptability and cost. Clinical acceptability entails ease with respect to both operating by the radiologist and patient comfort. In this work, effective tissue biomechanics based diagnostic techniques are proposed for prostate cancer assessment with the aim of early detection and minimizing the numbers of prostate biopsies. The techniques take advantage of the low cost, widely available and well established TRUS imaging method. The proposed techniques include novel elastography methods which were formulated based on an inverse finite element frame work. Conventional finite element analysis is known to have high computational complexity, hence computation time demanding. This renders the proposed elastography methods not suitable for real-time applications. To address this issue, an accelerated finite element method was proposed which proved to be suitable for prostate elasticity reconstruction. In this method, accurate finite element analysis of a large number of prostates undergoing TRUS probe loadings was performed. Geometry input and displacement and stress fields output obtained from the analysis were used to train a neural network mapping function to be used for elastopgraphy imaging of prostate cancer patients. The last part of the research presented in this thesis tackles an issue with the current 3D TRUS prostate needle biopsy. Current 3D TRUS prostate needle biopsy systems require registering preoperative 3D TRUS to intra-operative 2D TRUS images. Such image registration is time-consuming while its real-time implementation is yet to be developed. To bypass this registration step, concept of a robotic system was proposed which can reliably determine the preoperative TRUS probe position relative to the prostate to place at the same position relative to the prostate intra-operatively. For this purpose, a contact pressure feedback system is proposed to ensure similar prostate deformation during 3D and 2D image acquisition in order to bypass the registration step
Recommended from our members
Development of a Harmonic Motion Imaging guided Focused Ultrasound system for breast tumor characterization and treatment monitoring
Breast cancer is the most common cancer and the second leading cause of cancer death among women. About 1 in 8 U.S. women (about 12%) will develop invasive breast cancer over the course of their lifetime.
Existing methods of early detection of breast cancer include mammography and palpation, either by patient self-examination or clinical breast exam. Palpation is the manual detection of differences in tissue stiffness between breast tumors and normal breast tissue. The success of palpation relies on the fact that the stiffness of breast tumors is often an order of magnitude greater than that of normal breast tissue, i.e., breast lesions feel ''hard'' or ''lumpy'' as compared to normal breast tissue. A mammogram is an x-ray that allows a qualified specialist to examine the breast tissue for any suspicious areas. Mammography is less likely to reveal breast tumors in women younger than 50 years with denser breast than in older women. When a suspicious site is detected in the breast through a breast self-exam or on a screening mammogram, the doctor may request an ultrasound of the breast tissue. A breast ultrasound can provide evidence about whether the lump is a solid mass, a cyst filled with fluid, or a combination of the two. An invasive needle biopsy is the only diagnostic procedure that can definitely determine if the suspicious area is cancerous. In the clinic, 80% of women who have a breast biopsy do not have breast cancer.
Most women with breast cancer diagnosed will have some type of surgery to remove the tumor. Depending on the type of breast cancer and how advanced it is, the patient might need other types of treatment as well, such as chemotherapy and radiation therapy. Image-guided minimally-invasive treatment of localized breast tumor as an alternative to traditional breast surgery, such as high intensity focused ultrasound (HIFU) treatment, has become a subject of intensive research. HIFU applies extreme high temperatures to induce irreversible cell injury, tumor apoptosis and coagulative necrosis. Compared with conventional surgical procedures the main advantages of HIFU ablation lie in the fact that it is non-invasive, less scarring and less painful, allowing for shorter recovery time. HIFU can be guided by MRI (MRgFUS) or by conventional diagnostic ultrasound (USgFUS). Worldwide, thousands of patients with uterine fibroids, liver cancer, breast cancer, pancreatic cancer, bone tumors, and renal cancer have been treated by USgFUS.
In this dissertation, the objective is to develop an integrated Harmonic Motion Imaging guided Focused Ultrasound (HMIgFUS) system as a clinical monitoring technique for breast HIFU with the added capability of detecting tumors for treatment planning, evaluation of tissue stiffness changes during HIFU ablation for treatment monitoring in real time, and assessment of thermal lesion sizes after treatment evaluation. A new HIFU treatment planning method was described that used oscillatory radiation force induced displacement amplitude variations to detect the HIFU focal spot before lesioning. Using this method, we were able to visualize the HMIgFUS focal region at variable depths. By comparing the estimated displacement profiles with lesion locations in pathology, we demonstrated the feasibility of using this HMI-based technique to localize the HIFU focal spot and predict lesion location during the planning phase. For HIFU monitoring, a HIFU lesion detection and ablation monitoring method was first developed using oscillatory radiation force induced displacement amplitude variations in real time. Using this method, the HMIgFUS focal region and lesion formation were visualized in real time at a feedback rate of 2.4 Hz. By comparing the estimated lesion size against gross pathology, the feasibility of using HMIgFUS to monitor treatment and lesion formation without interruption is demonstrated. In order to reduce the imaging time, it is shown in this dissertation that using the steered FUS beam, HMI can be used to image a 2.3 times larger ROI without requiring physical movement of the transducer. Using steering for HMI can be used to shorten the total imaging duration without requiring physical movement of the transducer. For the application of breast tumor, HMI and HMIgFUS were optimized and applied to ex vivo breast tissue. The results showed that HMI is experimentally capable of mapping and differentiating stiffness in normal and abnormal breast tissues. HMIgFUS can also successfully generate thermal lesions on normal and pathological breast tissues. HMI has also been applied to post-surgical breast mastectomy specimens to mimic the in vivo environment. In the end, the first HMI clinical system has been built with added capability of GUP-based parallel beamforming. A clinical trial has been approved at Columbia University to image breast tumor on patient. The HMI clinical system has shown to be able to map fibroadenoma mass on two patients with valid HMI displacement. The study in this dissertation may yield an early-detection technique for breast cancer without any age discrimination and thus, increase the survival rate
Role of Hybrid Operating Room: Present and Future
With the dramatic progress of medical imaging modalities and growing needs for high-resolution intraoperative imaging in minimally invasive surgery, hybrid operative room (OR) has been developed as a powerful tool for different surgical scenarios. Under the guidance of high-definition cone beam CT (CBCT), an electromagnetic navigation bronchoscopy (ENB)-based marker implantation and subsequent localization of the pulmonary nodules can be implemented within a hybrid OR. Furthermore, the unparalleled real-time imaging capabilities and the ability to perform multiple tasks within the hybrid OR can facilitate image-guided single-port video-assisted thoracic surgery (iSPVATS), increasing the precision and improving outcomes of the procedure. With the help of a hybrid theatre, catheter-based thermal ablation can provide a safer and less invasive treatment option for select patient groups with early-stage non-small cell lung carcinomas (NSCLC) or metastases. In the future, the combination of hybrid operating room and other inspiring innovative techniques, such as robotic bronchoscopy, 3D-printing, natural orifice transluminal endoscopic surgery (NOTES) lung surgery could lead to a paradigm shift in the way thoracic surgery is conducted
Applications of computational methods in biomedical breast cancer imaging diagnostics: A review
With the exponential increase in new cases coupled with an increased mortality rate,
cancer has ranked as the second most prevalent cause of death in the world. Early detection is
paramount for suitable diagnosis and effective treatment of different kinds of cancers, but this is
limited to the accuracy and sensitivity of available diagnostic imaging methods. Breast cancer is
the most widely diagnosed cancer among women across the globe with a high percentage of total
cancer deaths requiring an intensive, accurate, and sensitive imaging approach. Indeed, it is treatable
when detected at an early stage
Identification of the Elastic Modulus of an Organ Model Using Reactive Force and Ultrasound Image
制度:新 ; 報告番号:甲3418号 ; 学位の種類:博士(工学) ; 授与年月日:2011/7/28 ; 早大学位記番号:新574
Image Guided Robots for Urology
This dissertation addresses the development of medical image-guided robots and their applications in urology. Image-guided robots integrate medical image information with robotic precision to assist the planning and execution of the image-guided interventions. Robots guided by two different image modalities, ultrasound and MR image, were developed. Ultrasound image-guided robots manipulate an ultrasound probe and a needle-guide that are calibrated with respect to the robot for image-guided targeting. A method for calibration was developed and verified through the image-guided targeting experiments. Robotic manipulation of the calibrated probe allows acquisition of image slices at precise location, which can be combined to generate a 3D ultrasound image. Software for 3D ultrasound image acquisition, processing, and segmentation was developed as a part of the image-guided robot system.
The feasibility of several image-guided intervention procedures using the ultrasound image-guided robot system was tested. The robot was used in a clinical trial of intraoperative transrectal ultrasound (TRUS) guided prostatectomy. The accuracy of TRUS-guided prostate biopsy using the robot was evaluated in a comparative study versus the classic human operation of the probe. Robot controlled palpation and image processing methods were developed for ultrasound elastography imaging of the prostate. An ultrasound to CT image-fusion method using the robot as a common reference was developed for percutaneous access of the kidney.
MRI-guided robots were developed for transrectal and transperineal prostate biopsy. Extensive in-vitro tests were performed to ensure MRI compatibility and image-guided accuracy of the robots. The transrectal robot was evaluated in an animal study and the transperineal robot is undergoing a clinical trial. The collection of methods and algorithms presented in this dissertation can contribute to the development of image-guided robots that may provide less invasive and more precise interventions in urology, interventional radiology, and other fields
Design, Development, and Evaluation of a Teleoperated Master-Slave Surgical System for Breast Biopsy under Continuous MRI Guidance
The goal of this project is to design and develop a teleoperated master-slave surgical system that can potentially assist the physician in performing breast biopsy with a magnetic resonance imaging (MRI) compatible robotic system. MRI provides superior soft-tissue contrast compared to other imaging modalities such as computed tomography or ultrasound and is used for both diagnostic and therapeutic procedures. The strong magnetic field and the limited space inside the MRI bore, however, restrict direct means of breast biopsy while performing real-time imaging. Therefore, current breast biopsy procedures employ a blind targeting approach based on magnetic resonance (MR) images obtained a priori. Due to possible patient involuntary motion or inaccurate insertion through the registration grid, such approach could lead to tool tip positioning errors thereby affecting diagnostic accuracy and leading to a long and painful process, if repeated procedures are required. Hence, it is desired to develop the aforementioned teleoperation system to take advantages of real-time MR imaging and avoid multiple biopsy needle insertions, improving the procedure accuracy as well as reducing the sampling errors.
The design, implementation, and evaluation of the teleoperation system is presented in this dissertation. A MRI-compatible slave robot is implemented, which consists of a 1 degree of freedom (DOF) needle driver, a 3-DOF parallel mechanism, and a 2-DOF X-Y stage. This slave robot is actuated with pneumatic cylinders through long transmission lines except the 1-DOF needle driver is actuated with a piezo motor. Pneumatic actuation through long transmission lines is then investigated using proportional pressure valves and controllers based on sliding mode control are presented. A dedicated master robot is also developed, and the kinematic map between the master and the slave robot is established. The two robots are integrated into a teleoperation system and a graphical user interface is developed to provide visual feedback to the physician. MRI experiment shows that the slave robot is MRI-compatible, and the ex vivo test shows over 85%success rate in targeting with the MRI-compatible robotic system. The success in performing in vivo animal experiments further confirm the potential of further developing the proposed robotic system for clinical applications
State-of-the-Art and Development Trend of Interventional Ultrasound in China
Interventional ultrasound (IUS) is an important branch of modern minimally invasive medicine that has been widely applied in clinical practice due to its unique techniques and advantages. As a relatively emerging field, IUS has progressed towards standardization, precision, intelligence, and cutting-edge directions alone with more than 40 years of development, which is becoming increasingly important techniques in clinical medicine. This article will briefly review the development and advancement of IUS for diagnosis and treatment in China in the era of precision medicine from the aspects of artificial intelligence, virtual navigation, molecular imaging, and nanotechnology
- …