Self-tuning run-time reconfigurable PID controller

Digital PID control algorithm is one of the most commonly used algorithms in the control systems area. This algorithm is very well known, it is simple, easily implementable in the computer control systems and most of all its operation is very predictable. Thus PID control has got well known impact on the control system behavior. However, in its simple form the controller have no reconfiguration support. In a case of the controlled system substantial changes (or the whole control environment, in the wider aspect, for example if the disturbances characteristics would change) it is not possible to make the PID controller robust enough. In this paper a new structure of digital PID controller is proposed, where the policy-based computing is used to equip the controller with the ability to adjust it's behavior according to the environmental changes. Application to the electro-oil evaporator which is a part of distillation installation is used to show the new controller structure in operation

Issues in the design of switched linear systems : a benchmark study

In this paper we present a tutorial overview of some of the issues that arise in the design of switched linear control systems. Particular emphasis is given to issues relating to stability and control system realisation. A benchmark regulation problem is then presented. This problem is most naturally solved by means of a switched control design. The challenge to the community is to design a control system that meets the required performance specifications and permits the application of rigorous analysis techniques. A simple design solution is presented and the limitations of currently available analysis techniques are illustrated with reference to this example

Integrated solar and ESS ac/dc systems for various grid applications

Modular multilevel converters (MMC) have gained prominence for high power applications in recent years due to their technical merits such as voltage scalability, harmonic performance, and high efficiency. Integration of renewable energy sources such as solar photovoltaic (PV) systems and energy storage systems (ESS) to the grid using power electronic (PE) resources is increasing due to the techno-economic successes achieved by such systems. Following these developments, the integration of MMCs with PV plants and ESS systems is one of the dynamic research avenues being pursued. Along these lines, an integrated development of PV plants, ESS, and alternating- and direct-current (ac/dc) power plants through Multi-port Autonomous Reconfigurable Solar (MARS) systems is proposed. The main research focus is on the modeling, control, and benefits of MARS systems compared to the discrete development of state-of-the-art PV, ESS, and HVdc links. Ultrafast high fidelity MARS HVdc models are developed to test advanced control algorithms. The advanced control algorithms include synchronverter-based (SG-based) control and grid forming predictive control methods. The grid forming control methods are defined as the control methods that regulate converter output voltage without any phase-locked loop (PLL) mechanisms. The proposed grid forming predictive control is based on the model based predictive control (MBPC-based) for frequency support and also includes traditional voltage support control. The proposed control algorithms in the MARS control architecture are evaluated for various short circuit ratio (SCR) and inertia conditions. To illustrate the technical benefits of MARS systems, the MARS system architecture is compared with the discrete development of state-of-the-art PV plants and hybrid PV plants. In addition, the MARS system is proposed as a promising solution to the momentary cessation problem often seen in PE-based resources connected to low SCR and low inertia grids --Abstract, page iv

Automation and Control Architecture for Hybrid Pipeline Robots

The aim of this research project, towards the automation of the Hybrid Pipeline Robot (HPR), is the development of a control architecture and strategy, based on reconfiguration of the control strategy for speed-controlled pipeline operations and self-recovering action, while performing energy and time management. The HPR is a turbine powered pipeline device where the flow energy is converted to mechanical energy for traction of the crawler vehicle. Thus, the device is flow dependent, compromising the autonomy, and the range of tasks it can perform. The control strategy proposes pipeline operations supervised by a speed control, while optimizing the energy, solved as a multi-objective optimization problem. The states of robot cruising and self recovering, are controlled by solving a neuro-dynamic programming algorithm for energy and time optimization, The robust operation of the robot includes a self-recovering state either after completion of the mission, or as a result of failures leading to the loss of the robot inside the pipeline, and to guaranteeing the HPR autonomy and operations even under adverse pipeline conditions Two of the proposed models, system identification and tracking system, based on Artificial Neural Networks, have been simulated with trial data. Despite the satisfactory results, it is necessary to measure a full set of robot’s parameters for simulating the complete control strategy. To solve the problem, an instrumentation system, consisting on a set of probes and a signal conditioning board, was designed and developed, customized for the HPR’s mechanical and environmental constraints. As a result, the contribution of this research project to the Hybrid Pipeline Robot is to add the capabilities of energy management, for improving the vehicle autonomy, increasing the distances the device can travel inside the pipelines; the speed control for broadening the range of operations; and the self-recovery capability for improving the reliability of the device in pipeline operations, lowering the risk of potential loss of the robot inside the pipeline, causing the degradation of pipeline performance. All that means the pipeline robot can target new market sectors that before were prohibitive

SMC based bilateral control

Design of a motion control system should take into account (a) unconstrained motion performed without interaction with environment or other system, and (b) constrained motion with system in contact with environment or another system or has certain functional interaction with another system. Control in both cases can be formulated in terms of maintaining desired system configuration what makes essentially the same structure for common tasks: trajectory tracking, interaction force control, compliance control etc. It will be shown that the same design approach can be used for systems that maintain some functional relation – like bilateral or multilateral systems, relation among mobile robots or control of haptic systems.

Intrinsically Evolvable Artificial Neural Networks

Dedicated hardware implementations of neural networks promise to provide faster, lower power operation when compared to software implementations executing on processors. Unfortunately, most custom hardware implementations do not support intrinsic training of these networks on-chip. The training is typically done using offline software simulations and the obtained network is synthesized and targeted to the hardware offline. The FPGA design presented here facilitates on-chip intrinsic training of artificial neural networks. Block-based neural networks (BbNN), the type of artificial neural networks implemented here, are grid-based networks neuron blocks. These networks are trained using genetic algorithms to simultaneously optimize the network structure and the internal synaptic parameters. The design supports online structure and parameter updates, and is an intrinsically evolvable BbNN platform supporting functional-level hardware evolution. Functional-level evolvable hardware (EHW) uses evolutionary algorithms to evolve interconnections and internal parameters of functional modules in reconfigurable computing systems such as FPGAs. Functional modules can be any hardware modules such as multipliers, adders, and trigonometric functions. In the implementation presented, the functional module is a neuron block. The designed platform is suitable for applications in dynamic environments, and can be adapted and retrained online. The online training capability has been demonstrated using a case study. A performance characterization model for RC implementations of BbNNs has also been presented