4,487 research outputs found
EC-CENTRIC: An Energy- and Context-Centric Perspective on IoT Systems and Protocol Design
The radio transceiver of an IoT device is often where most of the energy is consumed. For this reason, most research so far has focused on low power circuit and energy efficient physical layer designs, with the goal of reducing the average energy per information bit required for communication. While these efforts are valuable per se, their actual effectiveness can be partially neutralized by ill-designed network, processing and resource management solutions, which can become a primary factor of performance degradation, in terms of throughput, responsiveness and energy efficiency. The objective of this paper is to describe an energy-centric and context-aware optimization framework that accounts for the energy impact of the fundamental functionalities of an IoT system and that proceeds along three main technical thrusts: 1) balancing signal-dependent processing techniques (compression and feature extraction) and communication tasks; 2) jointly designing channel access and routing protocols to maximize the network lifetime; 3) providing self-adaptability to different operating conditions through the adoption of suitable learning architectures and of flexible/reconfigurable algorithms and protocols. After discussing this framework, we present some preliminary results that validate the effectiveness of our proposed line of action, and show how the use of adaptive signal processing and channel access techniques allows an IoT network to dynamically tune lifetime for signal distortion, according to the requirements dictated by the application
Survey of Inter-satellite Communication for Small Satellite Systems: Physical Layer to Network Layer View
Small satellite systems enable whole new class of missions for navigation,
communications, remote sensing and scientific research for both civilian and
military purposes. As individual spacecraft are limited by the size, mass and
power constraints, mass-produced small satellites in large constellations or
clusters could be useful in many science missions such as gravity mapping,
tracking of forest fires, finding water resources, etc. Constellation of
satellites provide improved spatial and temporal resolution of the target.
Small satellite constellations contribute innovative applications by replacing
a single asset with several very capable spacecraft which opens the door to new
applications. With increasing levels of autonomy, there will be a need for
remote communication networks to enable communication between spacecraft. These
space based networks will need to configure and maintain dynamic routes, manage
intermediate nodes, and reconfigure themselves to achieve mission objectives.
Hence, inter-satellite communication is a key aspect when satellites fly in
formation. In this paper, we present the various researches being conducted in
the small satellite community for implementing inter-satellite communications
based on the Open System Interconnection (OSI) model. This paper also reviews
the various design parameters applicable to the first three layers of the OSI
model, i.e., physical, data link and network layer. Based on the survey, we
also present a comprehensive list of design parameters useful for achieving
inter-satellite communications for multiple small satellite missions. Specific
topics include proposed solutions for some of the challenges faced by small
satellite systems, enabling operations using a network of small satellites, and
some examples of small satellite missions involving formation flying aspects.Comment: 51 pages, 21 Figures, 11 Tables, accepted in IEEE Communications
Surveys and Tutorial
A Case for Time Slotted Channel Hopping for ICN in the IoT
Recent proposals to simplify the operation of the IoT include the use of
Information Centric Networking (ICN) paradigms. While this is promising,
several challenges remain. In this paper, our core contributions (a) leverage
ICN communication patterns to dynamically optimize the use of TSCH (Time
Slotted Channel Hopping), a wireless link layer technology increasingly popular
in the IoT, and (b) make IoT-style routing adaptive to names, resources, and
traffic patterns throughout the network--both without cross-layering. Through a
series of experiments on the FIT IoT-LAB interconnecting typical IoT hardware,
we find that our approach is fully robust against wireless interference, and
almost halves the energy consumed for transmission when compared to CSMA. Most
importantly, our adaptive scheduling prevents the time-slotted MAC layer from
sacrificing throughput and delay
Experimentation with MANETs of Smartphones
Mobile AdHoc NETworks (MANETs) have been identified as a key emerging
technology for scenarios in which IEEE 802.11 or cellular communications are
either infeasible, inefficient, or cost-ineffective. Smartphones are the most
adequate network nodes in many of these scenarios, but it is not
straightforward to build a network with them. We extensively survey existing
possibilities to build applications on top of ad-hoc smartphone networks for
experimentation purposes, and introduce a taxonomy to classify them. We present
AdHocDroid, an Android package that creates an IP-level MANET of (rooted)
Android smartphones, and make it publicly available to the community.
AdHocDroid supports standard TCP/IP applications, providing real smartphone
IEEE 802.11 MANET and the capability to easily change the routing protocol. We
tested our framework on several smartphones and a laptop. We validate the MANET
running off-the-shelf applications, and reporting on experimental performance
evaluation, including network metrics and battery discharge rate.Comment: 6 pages, 7 figures, 1 tabl
An Energy-conscious Transport Protocol for Multi-hop Wireless Networks
We present a transport protocol whose goal is to reduce power consumption without compromising delivery requirements of applications. To meet its goal of energy efficiency, our transport protocol (1) contains mechanisms to balance end-to-end vs. local retransmissions; (2) minimizes acknowledgment traffic using receiver regulated rate-based flow control combined with selected acknowledgements and in-network caching of packets; and (3) aggressively seeks to avoid any congestion-based packet loss. Within a recently developed ultra low-power multi-hop wireless network system, extensive simulations and experimental results demonstrate that our transport protocol meets its goal of preserving the energy efficiency of the underlying network.Defense Advanced Research Projects Agency (NBCHC050053
Adaptive Duty Cycling MAC Protocols Using Closed-Loop Control for Wireless Sensor Networks
The fundamental design goal of wireless sensor MAC protocols is to minimize unnecessary power consumption of the sensor nodes, because of its stringent resource constraints and ultra-power limitation. In existing MAC protocols in wireless sensor networks (WSNs), duty cycling, in which each node periodically cycles between the active and sleep states, has been introduced to reduce unnecessary energy consumption. Existing MAC schemes, however, use a fixed duty cycling regardless of multi-hop communication and traffic fluctuations. On the other hand, there is a tradeoff between energy efficiency and delay caused by duty cycling mechanism in multi-hop communication and existing MAC approaches only tend to improve energy efficiency with sacrificing data delivery delay. In this paper, we propose two different MAC schemes (ADS-MAC and ELA-MAC) using closed-loop control in order to achieve both energy savings and minimal delay in wireless sensor networks. The two proposed MAC schemes, which are synchronous and asynchronous approaches, respectively, utilize an adaptive timer and a successive preload frame with closed-loop control for adaptive duty cycling. As a result, the analysis and the simulation results show that our schemes outperform existing schemes in terms of energy efficiency and delivery delay
- …