133 research outputs found
Physical Layer Service Integration in 5G: Potentials and Challenges
High transmission rate and secure communication have been identified as the
key targets that need to be effectively addressed by fifth generation (5G)
wireless systems. In this context, the concept of physical-layer security
becomes attractive, as it can establish perfect security using only the
characteristics of wireless medium. Nonetheless, to further increase the
spectral efficiency, an emerging concept, termed physical-layer service
integration (PHY-SI), has been recognized as an effective means. Its basic idea
is to combine multiple coexisting services, i.e., multicast/broadcast service
and confidential service, into one integral service for one-time transmission
at the transmitter side. This article first provides a tutorial on typical
PHY-SI models. Furthermore, we propose some state-of-the-art solutions to
improve the overall performance of PHY-SI in certain important communication
scenarios. In particular, we highlight the extension of several concepts
borrowed from conventional single-service communications, such as artificial
noise (AN), eigenmode transmission etc., to the scenario of PHY-SI. These
techniques are shown to be effective in the design of reliable and robust
PHY-SI schemes. Finally, several potential research directions are identified
for future work.Comment: 12 pages, 7 figure
IRS-Aided SWIPT: Joint Waveform, Active and Passive Beamforming Design Under Nonlinear Harvester Model
The performance of Simultaneous Wireless Information and Power Transfer
(SWIPT) is mainly constrained by the received Radio-Frequency (RF) signal
strength. To tackle this problem, we introduce an Intelligent Reflecting
Surface (IRS) to compensate the propagation loss and boost the transmission
efficiency. This paper proposes a novel IRS-aided SWIPT system where a
multi-carrier multi-antenna Access Point (AP) transmits information and power
simultaneously, with the assist of an IRS, to a single-antenna User Equipment
(UE) employing practical receiving schemes. Considering harvester nonlinearity,
we characterize the achievable Rate-Energy (R-E) region through a joint
optimization of waveform, active and passive beamforming based on the Channel
State Information at the Transmitter (CSIT). This problem is solved by the
Block Coordinate Descent (BCD) method, where we obtain the active precoder in
closed form, the passive beamforming by the Successive Convex Approximation
(SCA) approach, and the waveform amplitude by the Geometric Programming (GP)
technique. To facilitate practical implementation, we also propose a
low-complexity design based on closed-form adaptive waveform schemes.
Simulation results demonstrate the proposed algorithms bring considerable R-E
gains with robustness to CSIT inaccuracy and finite IRS states, and emphasize
the importance of modeling harvester nonlinearity in the IRS-aided SWIPT
design.Comment: Source code available at
https://github.com/SnowzTail/irs-aided-swipt-joint-waveform-active-and-passive-beamforming-design-under-nonlinear-harvester-mode
Advances in Resource Allocation Optimization for Multiuser Wireless Systems with Joint Energy and Information Transfer
Ph.DDOCTOR OF PHILOSOPH
Integrated Data and Energy Communication Network: A Comprehensive Survey
OAPA In order to satisfy the power thirsty of communication devices in the imminent 5G era, wireless charging techniques have attracted much attention both from the academic and industrial communities. Although the inductive coupling and magnetic resonance based charging techniques are indeed capable of supplying energy in a wireless manner, they tend to restrict the freedom of movement. By contrast, RF signals are capable of supplying energy over distances, which are gradually inclining closer to our ultimate goal – charging anytime and anywhere. Furthermore, transmitters capable of emitting RF signals have been widely deployed, such as TV towers, cellular base stations and Wi-Fi access points. This communication infrastructure may indeed be employed also for wireless energy transfer (WET). Therefore, no extra investment in dedicated WET infrastructure is required. However, allowing RF signal based WET may impair the wireless information transfer (WIT) operating in the same spectrum. Hence, it is crucial to coordinate and balance WET and WIT for simultaneous wireless information and power transfer (SWIPT), which evolves to Integrated Data and Energy communication Networks (IDENs). To this end, a ubiquitous IDEN architecture is introduced by summarising its natural heterogeneity and by synthesising a diverse range of integrated WET and WIT scenarios. Then the inherent relationship between WET and WIT is revealed from an information theoretical perspective, which is followed by the critical appraisal of the hardware enabling techniques extracting energy from RF signals. Furthermore, the transceiver design, resource allocation and user scheduling as well as networking aspects are elaborated on. In a nutshell, this treatise can be used as a handbook for researchers and engineers, who are interested in enriching their knowledge base of IDENs and in putting this vision into practice
Simultaneous wireless information and power transfer in full-duplex communication systems
As wireless devices are mostly constrained by their inability to operate independently infinitely away from centralised power sources, radio frequency (RF) energy harvesting (EH) has been identified as a promising technique for future wireless devices. For this reason, this thesis introduces a novelty in RF EH full-duplex (FD) wireless communication systems. Specifically, this thesis investigate the potentials of simultaneous wireless information and power transfer (SWIPT) in FD communication systems. This thesis firstly focuses on optimal transmit strategies, rate maximization and power minimizing approach for SWIPT in FD systems. Using the rate-split method, difference of convex programming, semi-definite programming technique and one-dimensional search, we reformulate complex optimization problems to yield problem formulations that can be efficiently solved, thus we develop rate maximization algorithm for SWIPT in a point-to-point FD system, SWIPT in FD multiple-input multiple-output (MIMO) two-way relay system and power minimization approach for SWIPT in a multiuser MIMO FD system. This thesis also presents research work carried out with the aim of maximising the secrecy sum-rate for SWIPT in FD systems. In this context, we employ the use of an amplify and forward (AF) relay to inject artificial noise (AN) in order to confuse the eavesdropper. Thus, we address the optimal joint design of the beamforming matrix and AN covariance matrix at the relay, and the transmit power at the sources. Comprehensively, we present extensive theoretical and computer simulations to corroborate the need for joint optimization
- …