A Novel 3D printed leg design for a Biped Robot

This paper proposes a novel leg design for a humanoid robot that can be 3D printed. More explicitly, the efforts of this paper are to bring some of the more complex leg designs seen in large scale bipedal robot into the realm of smaller bipeds while still allowing for it to be easily reproducible or modified. In order to accomplish this 3D printing technology was utilized, as well as an iterative design process. An ankle and knee powered by linear actuators were first constructed to test the conceptual design of the leg. This was followed by a complete leg design with improved ankle and knee, along with the rest of the leg

Design, modelling and control of a biped robot platform based on Poppy project

Taking as a reference the open source 3D printed robot called ''Poppy'' (https://www.poppy-project.org/) this project aims to develop a new biped robot platform using standard size servomotors. To accomplish this project is required to design a new structure to be able to host the chosen motors and also add a new degree of freedom for each leg, in order to obtain a 12 DoF robot. The next objetive is the modelling and simulation. For that purpose Gazebo simulator will be used to provide the option to be controlled with ROS. In addition various sensors will be added to the model, in order to obtain the feedback necessary for the control algorithm, which is the last objetive of this project

Design and Experiments of a Novel Humanoid Robot with Parallel Architectures

In this paper, the mechanical design of the LARMbot 2, a low-cost user-oriented humanoid robot was presented. LARMbot 2 is characterized by parallel architectures for both the torso and legs. The proposed design was presented with the kinematics of its main parts—legs, torso, arms—and then compared to its previous version, which was characterized by a different leg mechanism, to highlight the advantages of the latest design. A prototype was then presented, with constructive details of its subsystems and its technical specifications. To characterize the performance of the proposed robot, experimental results were presented for both the walking and weight-lifting operations

Tree pruning/inspection robot climbing mechanism design, kinematics study and intelligent control : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Mechatronics at Massey University, Manawatu Campus, New Zealand

Forestry plays an important role in New Zealand’s economy as its third largest export earner. To achieve New Zealand Wood Council’s export target of $12 billion by 2022 in forest and improve the current situation that is the reduction of wood harvesting area, the unit value and volume of lumber must be increased. Pruning is essential and critical for obtaining high-quality timber during plantation growing. Powerful tools and robotic systems have great potential for sustainable forest management. Up to now, only a few tree-pruning robotic systems are available on the market. Unlike normal robotic manipulators or mobile robots, tree pruning robot has its unique requirements and features. The challenges include climbing pattern control, anti-free falling, and jamming on the tree trunk etc. Through the research on the available pole and tree climbing robots, this thesis presents a novel mechanism of tree climbing robotic system that could serve as a climbing platform for applications in the forest industry like tree pruning, inspection etc. that requires the installation of powerful or heavy tools. The unique features of this robotic system include the passive and active anti-falling mechanisms that prevent the robot falling to the ground under either static or dynamic situations, the capability to vertically or spirally climb up a tree trunk and the flexibility to suit different sizes of tree trunk. Furthermore, for the convenience of tree pruning and the fulfilment of robot anti-jamming feature, the robot platform while the robot climbs up should move up without tilting. An intelligent platform balance control system with real-time sensing integration was developed to overcome the climbing tilting problem. The thesis also presents the detail kinematic and dynamic study, simulation, testing and analysis. A physical testing model of this proposed robotic system was built and tested on a cylindrical rod. The mass of the prototype model is 6.8 Kg and can take 2.1 Kg load moving at the speed of 42 mm/s. The trunk diameter that the robot can climb up ranges from 120 to 160 mm. The experiment results have good matches with the simulations and analysis. This research established a basis for developing wheel-driven tree or pole climbing robots. The design and simulation method, robotic leg mechanism and the control methodologies could be easily applied for other wheeled tree/pole climbing robots. This research has produced 6 publications, two ASME journal papers and 4 IEEE international conference papers that are available on IEEE Xplore. The published content ranges from robotic mechanism design, signal processing, platform balance control, and robot climbing behavior optimization. This research also brought interesting topics for further research such as the integration with artificial intelligent module and mobile robot for remote tree/forest inspection after pruning or for pest control

Design and control of SLIDER: an ultra-lightweight, knee-less, low-cost bipedal walking robot

Most state-of-the-art bipedal robots are designed to be highly anthropomorphic and therefore possess legs with knees. Whilst this facilitates more human-like locomotion, there are implementation issues that make walking with straight or near-straight legs difficult. Most bipedal robots have to move with a constant bend in the legs to avoid singularities at the knee joints, and to keep the centre of mass at a constant height for control purposes. Furthermore, having a knee on the leg increases the design complexity as well as the weight of the leg, hindering the robot’s performance in agile behaviours such as running and jumping. We present SLIDER, an ultra-lightweight, low-cost bipedal walking robot with a novel knee-less leg design. This nonanthropomorphic straight-legged design reduces the weight of the legs significantly whilst keeping the same functionality as anthropomorphic legs. Simulation results show that SLIDER’s low-inertia legs contribute to less vertical motion in the center of mass (CoM) than anthropomorphic robots during walking, indicating that SLIDER’s model is closer to the widely used Inverted Pendulum (IP) model. Finally, stable walking on flat terrain is demonstrated both in simulation and in the physical world, and feedback control is implemented to address challenges with the physical robot

RPBP: Rapid-prototyped remote-brain biped with 3D perception

This paper provides the design of a novel open-hardware mini-bipedal robot, named Rapid-Prototyped Remote-Brain BiPed (RPBP), that is developed to provide a low-cost and reliable platform for locomotion and perception research. The robot is made of customized 3D-printed material (ABS plastic) and electronics, and commercial Robotics Dynamixel MX-28 actuators, as well as visual RGB-D and IMU sensing systems. We show that the robot is able to perform some locomotion/visual-odometry tasks and it is easy to switch between different feet designs, providing also a novel Center-of-Pressure (CoP) sensing system, so that it can deal with various types of terrain. Moreover, we provide a description of its control and perception system architecture, as well as our opensource software packages that provide sensing and navigation tools for locomotion and visual odometry on the robot. Finally, we briefly discuss the transferability of some prototype research that has been done on the developed mini-biped, to half or fullsize humanoid robots, such as COMAN or WALK-MAN