2,594 research outputs found
Cooperative Relative Positioning of Mobile Users by Fusing IMU Inertial and UWB Ranging Information
Relative positioning between multiple mobile users is essential for many
applications, such as search and rescue in disaster areas or human social
interaction. Inertial-measurement unit (IMU) is promising to determine the
change of position over short periods of time, but it is very sensitive to
error accumulation over long term run. By equipping the mobile users with
ranging unit, e.g. ultra-wideband (UWB), it is possible to achieve accurate
relative positioning by trilateration-based approaches. As compared to vision
or laser-based sensors, the UWB does not need to be with in line-of-sight and
provides accurate distance estimation. However, UWB does not provide any
bearing information and the communication range is limited, thus UWB alone
cannot determine the user location without any ambiguity. In this paper, we
propose an approach to combine IMU inertial and UWB ranging measurement for
relative positioning between multiple mobile users without the knowledge of the
infrastructure. We incorporate the UWB and the IMU measurement into a
probabilistic-based framework, which allows to cooperatively position a group
of mobile users and recover from positioning failures. We have conducted
extensive experiments to demonstrate the benefits of incorporating IMU inertial
and UWB ranging measurements.Comment: accepted by ICRA 201
Communication Subsystems for Emerging Wireless Technologies
The paper describes a multi-disciplinary design of modern communication systems. The design starts with the analysis of a system in order to define requirements on its individual components. The design exploits proper models of communication channels to adapt the systems to expected transmission conditions. Input filtering of signals both in the frequency domain and in the spatial domain is ensured by a properly designed antenna. Further signal processing (amplification and further filtering) is done by electronics circuits. Finally, signal processing techniques are applied to yield information about current properties of frequency spectrum and to distribute the transmission over free subcarrier channels
AoA-aware Probabilistic Indoor Location Fingerprinting using Channel State Information
With expeditious development of wireless communications, location
fingerprinting (LF) has nurtured considerable indoor location based services
(ILBSs) in the field of Internet of Things (IoT). For most pattern-matching
based LF solutions, previous works either appeal to the simple received signal
strength (RSS), which suffers from dramatic performance degradation due to
sophisticated environmental dynamics, or rely on the fine-grained physical
layer channel state information (CSI), whose intricate structure leads to an
increased computational complexity. Meanwhile, the harsh indoor environment can
also breed similar radio signatures among certain predefined reference points
(RPs), which may be randomly distributed in the area of interest, thus mightily
tampering the location mapping accuracy. To work out these dilemmas, during the
offline site survey, we first adopt autoregressive (AR) modeling entropy of CSI
amplitude as location fingerprint, which shares the structural simplicity of
RSS while reserving the most location-specific statistical channel information.
Moreover, an additional angle of arrival (AoA) fingerprint can be accurately
retrieved from CSI phase through an enhanced subspace based algorithm, which
serves to further eliminate the error-prone RP candidates. In the online phase,
by exploiting both CSI amplitude and phase information, a novel bivariate
kernel regression scheme is proposed to precisely infer the target's location.
Results from extensive indoor experiments validate the superior localization
performance of our proposed system over previous approaches
Location-aware computing: a neural network model for determining location in wireless LANs
The strengths of the RF signals arriving from more access points in a wireless LANs are related to the position of the mobile terminal and can be used to derive the location of the user. In a heterogeneous environment, e.g. inside a building or in a variegated urban geometry, the received power is a very complex function of the distance, the geometry, the materials. The complexity of the inverse problem (to derive the position from the signals) and the lack of complete information, motivate to consider flexible models based on a network of functions (neural networks). Specifying the value of the free parameters of the model requires a supervised learning strategy that starts from a set of labeled examples to construct a model that will then generalize in an appropriate manner when confronted with new data, not present in the training set. The advantage of the method is that it does not require ad-hoc infrastructure in addition to the wireless LAN, while the flexible modeling and learning capabilities of neural networks achieve lower errors in determining the position, are amenable to incremental improvements, and do not require the detailed knowledge of the access point locations and of the building characteristics. A user needs only a map of the working space and a small number of identified locations to train a system, as evidenced by the experimental results presented
CIR Parametric Rules Precocity For Ranging Error Mitigation In IR-UWB
The cutting-edge technology to support high ranging accuracy within the indoor environment is Impulse Radio Ultra Wide Band (IR-UWB) standard. Besides accuracy, IR-UWB’s low-complex architecture and low power consumption align well with mobile devices. A prime challenge in indoor IR-UWB based localization is to achieve a position accuracy under non-line-of-sight (NLOS) and multipath propagation (MPP) conditions. Another challenge is to achieve acceptable accuracy in the conditions mentioned above without any significant increase in latency and computational burden. This dissertation proposes a solution for addressing the accuracy and reliability problem of indoor localization system satisfying acceptable delay or computational complexity overhead. The proposed methodology is based on rules for identification of line-of-sight (LOS) and NLOS and the range error bias estimation and correction due to NLOS and MPP conditions. The proposed methodology provides accuracy for two major application domains, namely, wireless sensor networks (WSNs) and indoor tracking and navigation (ITN). This dissertation offers two different solutions for the localization problem. The first solution is a rules-based classification of LOS / NLOS and geometric-based range correction for WSN. In the first solution, the Boolean logic based classification is designed for identification of LOS/NLOS. The logic is based on channel impulse response (CIR) parameters. The second solution is based on fuzzy logic. The fuzzy based solution is appealing well for the stringent precision requirements in ITN. In this solution, the parametric Boolean logic from the first solution is converted and expanded into rules. These rules are implemented into a fuzzy logic based mechanism for designing a fuzzy inference system. The system estimates the ranging errors and correcting unmitigated ranges. The expanded rules and designed methodology are based on theoretical analysis and empirical observations of the parameters. The rules accommodate the parameters uncertainties for estimating the ranging error through the relationship between the input parameters uncertainties and ranging error using fuzzy inference mechanism. The proposed solutions are evaluated using real-world measurements in different indoor environments. The performance of the proposed solutions is also evaluated in terms of true classification rate, residual ranging errors’ cumulative distributions and probability density distributions, as well as outage probabilities. Evaluation results show that the true classification rate is more than 95%. Moreover, using the proposed fuzzy logic based solution, the residual errors convergence of 90% is attained for error threshold of 10 cm, and the reliability of the localization system is also more than 90% for error threshold of 15 cm
- …