A new method for robust beamforming using iterative second-order cone programming

This paper addresses the problem of beamforming for antenna arrays in the presence of mismatches between the true and nominal steering vectors. A new method for robust beamforming is proposed by minimizing the array output power while controlling the array mainlobe response. Due to the presence of the non-convex response constraints, a new approach based on iteratively linearizing the non-convex constraints is proposed to reformulate the non-convex problem to a series of second-order cone programming (SOCP) subproblems, each of which can be optimally solved by well-established convex optimization techniques. Simulation results show that the proposed method offers better performance than conventional methods tested. © 2012 IEEE.published_or_final_versionThe 2012 IEEE International Symposium on Circuits and Systems (ISCAS), Seoul, Korea, 20-23 May 2012. In IEEE International Symposium on Circuits and Systems Proceedings, 2012, p. 2569-257

Robust Transceiver Design for MISO Interference Channel with Energy Harvesting

In this paper, we consider multiuser multiple-input single-output (MISO) interference channel where the received signal is divided into two parts for information decoding and energy harvesting (EH), respectively. The transmit beamforming vectors and receive power splitting (PS) ratios are jointly designed in order to minimize the total transmission power subject to both signal-to-interference-plus-noise ratio (SINR) and EH constraints. Most joint beamforming and power splitting (JBPS) designs assume that perfect channel state information (CSI) is available; however CSI errors are inevitable in practice. To overcome this limitation, we study the robust JBPS design problem assuming a norm-bounded error (NBE) model for the CSI. Three different solution approaches are proposed for the robust JBPS problem, each one leading to a different computational algorithm. Firstly, an efficient semidefinite relaxation (SDR)-based approach is presented to solve the highly non-convex JBPS problem, where the latter can be formulated as a semidefinite programming (SDP) problem. A rank-one recovery method is provided to recover a robust feasible solution to the original problem. Secondly, based on second order cone programming (SOCP) relaxation, we propose a low complexity approach with the aid of a closed-form robust solution recovery method. Thirdly, a new iterative method is also provided which can achieve near-optimal performance when the SDR-based algorithm results in a higher-rank solution. We prove that this iterative algorithm monotonically converges to a Karush-Kuhn-Tucker (KKT) solution of the robust JBPS problem. Finally, simulation results are presented to validate the robustness and efficiency of the proposed algorithms.Comment: 13 pages, 8 figures. arXiv admin note: text overlap with arXiv:1407.0474 by other author

Beamforming Techniques for Non-Orthogonal Multiple Access in 5G Cellular Networks

In this paper, we develop various beamforming techniques for downlink transmission for multiple-input single-output (MISO) non-orthogonal multiple access (NOMA) systems. First, a beamforming approach with perfect channel state information (CSI) is investigated to provide the required quality of service (QoS) for all users. Taylor series approximation and semidefinite relaxation (SDR) techniques are employed to reformulate the original non-convex power minimization problem to a tractable one. Further, a fairness-based beamforming approach is proposed through a max-min formulation to maintain fairness between users. Next, we consider a robust scheme by incorporating channel uncertainties, where the transmit power is minimized while satisfying the outage probability requirement at each user. Through exploiting the SDR approach, the original non-convex problem is reformulated in a linear matrix inequality (LMI) form to obtain the optimal solution. Numerical results demonstrate that the robust scheme can achieve better performance compared to the non-robust scheme in terms of the rate satisfaction ratio. Further, simulation results confirm that NOMA consumes a little over half transmit power needed by OMA for the same data rate requirements. Hence, NOMA has the potential to significantly improve the system performance in terms of transmit power consumption in future 5G networks and beyond.Comment: accepted to publish in IEEE Transactions on Vehicular Technolog

Robust beamforming with magnitude response constraints using iterative second-order cone programming

The problem of robust beamforming for antenna arrays with arbitrary geometry and magnitude response constraints is one of considerable importance. Due to the presence of the non-convex magnitude response constraints, conventional convex optimization techniques cannot be applied directly. A new approach based on iteratively linearizing the non-convex constraints is then proposed to reformulate the non-convex problem to a series of convex subproblems, each of which can be optimally solved using second-order cone programming (SOCP). Moreover, in order to obtain a more robust beamformer against array imperfections, the proposed method is further extended by optimizing its worst-case performance using again SOCP. Different from some conventional methods which are restricted to linear arrays, the proposed method is applicable to arbitrary array geometries since the weight vector, rather than its autocorrelation sequence, is used as the variable. Simulation results show that the performance of the proposed method is comparable to the optimal solution previously proposed for uniform linear arrays, and it also gives satisfactory results under different array specifications and geometries tested. © 2006 IEEE.published_or_final_versio

Joint Transceiver Design Algorithms for Multiuser MISO Relay Systems with Energy Harvesting

In this paper, we investigate a multiuser relay system with simultaneous wireless information and power transfer. Assuming that both base station (BS) and relay station (RS) are equipped with multiple antennas, this work studies the joint transceiver design problem for the BS beamforming vectors, the RS amplify-and-forward transformation matrix and the power splitting (PS) ratios at the single-antenna receivers. Firstly, an iterative algorithm based on alternating optimization (AO) and with guaranteed convergence is proposed to successively optimize the transceiver coefficients. Secondly, a novel design scheme based on switched relaying (SR) is proposed that can significantly reduce the computational complexity and overhead of the AO based designs while maintaining a similar performance. In the proposed SR scheme, the RS is equipped with a codebook of permutation matrices. For each permutation matrix, a latent transceiver is designed which consists of BS beamforming vectors, optimally scaled RS permutation matrix and receiver PS ratios. For the given CSI, the optimal transceiver with the lowest total power consumption is selected for transmission. We propose a concave-convex procedure based and subgradient-type iterative algorithms for the non-robust and robust latent transceiver designs. Simulation results are presented to validate the effectiveness of all the proposed algorithms