Single Event Upsets under 14-MeV Neutrons in a 28-nm SRAM-based FPGA in Static Mode

A sensitivity characterization of a Xilinx Artix-7 FPGA against 14.2 MeV neutrons is presented. The content of the internal SRAMs and flip-flops were downloaded in a PC and compared with a golden version of it. Flipped cells were identified and classified as cells of the configuration RAM, BRAM, or flip-flops. SBUs and MCUs with multiplicities ranging from 2 to 8 were identified using a statistical method. Possible shapes of multiple events are also investigated, showing a trend to follow wordlines. Finally, MUSCA SEP3 was used to make assesment for actual environments and an improvement of SEU injection test is proposed

A Study of the Robustness Against SEUs of Digital Circuits Implemented with FPGA DSPs

In this paper we present an experimental validation of the reliability increase of digital circuits implemented in XilinxTMFPGAs when they are implemented using the DSPs (Digital Signal Processors) that are available in the reconfigurable device. For this purpose, we have used a fault-injection platform developed by our research group, NESSY [1]. The presented experiments demonstrate that the probability of occurrence of a SEU effect is similar both in the circuits implemented with and without using embedded DSPs. However, the former are more efficient in terms of area usage, which leads to a decrease in the probability of a SEU occurrence

New Design Techniques for Dynamic Reconfigurable Architectures

L'abstract è presente nell'allegato / the abstract is in the attachmen

A Study of the Robustness Against SEUs of Digital Circuits Implemented with FPGA DSPs

In this paper we present an experimental validation of the reliability increase of digital circuits implemented in XilinxTMFPGAs when they are implemented using the DSPs (Digital Signal Processors) that are available in the reconfigurable device. For this purpose, we have used a fault-injection platform developed by our research group, NESSY [1]. The presented experiments demonstrate that the probability of occurrence of a SEU effect is similar both in the circuits implemented with and without using embedded DSPs. However, the former are more efficient in terms of area usage, which leads to a decrease in the probability of a SEU occurrence

FireNN: Neural Networks Reliability Evaluation on Hybrid Platforms

The growth of neural networks complexity has led to adopt of hardware-accelerators to cope with the computational power required by the new architectures. The possibility to adapt the network for different platforms enhanced the interests of safety-critical applications. The reliability evaluation of neural networks are still premature and requires platforms to measure the safety standards required by mission-critical applications. For this reason, the interest in studying the reliability of neural networks is growing. We propose a new approach for evaluating the resiliency of neural networks by using hybrid platforms. The approach relies on the reconfigurable hardware for emulating the target hardware platform and performing the fault injection process. The main advantage of the proposed approach is to involve the on-hardware execution of the neural network in the reliability analysis without any intrusiveness into the network algorithm and addressing specific fault models. The implementation of FireNN, the platform based on the proposed approach, is described in the paper. Experimental analyses are performed using fault injection on AlexNet. The analyses are carried out using the FireNN platform and the results are compared with the outcome of traditional software-level evaluations. Results are discussed considering the insight into the hardware level achieved using FireNN

A Methodology to Emulate Single Event Upsets in Flip-Flops using FPGAs through Partial Reconfiguration and Instrumentation

This paper presents a methodology to emulate Single Event Upsets (SEUs) in FPGA flip-flops (FFs). Since the content of a FF is not modifiable through the FPGA configuration memory bits, a dedicated design is required for fault injection in the FFs. The method proposed in this paper is a hybrid approach that combines FPGA partial reconfiguration and extra logic added to the circuit under test, without modifying its operation. This approach has been integrated into a fault-injection platform, named NESSY (Non intrusive ErrorS injection SYstem), developed by our research group. Finally, this paper includes results on a Virtex-5 FPGA demonstrating the validity of the method on the ITC’99 benchmark set and a Feed-Forward Equalization (FFE) filter. In comparison with other approaches in the literature, this methodology reduces the resource consumption introduced to carry out the fault injection in FFs, at the cost of adding very little time overhead (1.6 �μs per fault)

Adaptive reconfigurable voting for enhanced reliability in medium-grained fault tolerant architectures

The impact of SRAM-based FPGAs is constantly growing in aerospace industry despite the fact that their volatile configuration memory is highly susceptible to radiation effects. Therefore, strong fault-handling mechanisms have to be developed in order to protect the design and make it capable of fighting against both soft and permanent errors. In this paper, a fully reconfigurable medium-grained triple modular redundancy (TMR) architecture which forms part of a runtime adaptive on-board processor (OBP) is presented. Fault mitigation is extended to the voting mechanism by applying our reconfiguration methodology not only to domain replicas but also to the voter itself. The proposed approach takes advantage of adaptive configuration placement and modular property of the OBP, thus allowing on-line creation of different medium-grained TMRs and selection of their granularity level. Consequently, we are able to narrow down the fault-affected area thus making the error recovery process faster and less power consuming. The conventional hardware based voting is supported by the ICAP-based one in order to additionally strengthen the reconfigurable intermediate voting. In addition, the implementation methodology ensures using only one memory footprint for all voters and their voting adaptations thus saving storing resources in expensive rad-hard memories

Robustesse par conception de circuits implantés sur FPGA SRAM et validation par injection de fautes

Cette thèse s'intéresse en premier lieu à l'évaluation des effets fonctionnels des erreurs survenant dans la mémoire SRAM de configuration de certains FPGAs. La famille Virtex II Pro de Xilinx est utilisée comme premier cas pratique d'expérimentation. Des expérimentations sous faisceau laser nous ont permis d'avoir une bonne vue d'ensemble sur les motifs d'erreurs réalistes qui sont obtenus par des sources de perturbations réelles. Une méthodologie adaptée d'injection de fautes a donc été définie pour permettre une meilleure évaluation, en phase de conception, de la robustesse d'un circuit implanté sur ce type de technologie. Cette méthodologie est basée sur de la reconfiguration dynamique. Le même type d'approche a ensuite été évalué sur plusieurs cibles technologiques, ce qui a nécessité le développement de plusieurs environnements d'injection de fautes. L'étude a pour la première fois inclus la famille AT40K de ATMEL, qui permet un type de reconfiguration unique et efficace. Le second type de contribution concerne l'augmentation à faible coût de la robustesse de circuits implantés sur des plateformes FPGA SRAM. Nous proposons une approche de protection sélective exploitant les ressources du FPGA inutilisées par l'application. L'approche a été automatisée sur plusieurs cibles technologiques (Xilinx, Altera) et l'efficacité est analysée en utilisant les méthodes d'injection de fautes précédemment développées.This thesis focuses primarily on the evaluation of the functional effects of errors occurring in the SRAM configuration memory of some FPGAs. Xilinx Virtex II Pro family is used as a first case study. Experiments under laser beam allowed us to have a good overview of realistic error patterns, related to real disturbance sources. A suited fault injection methodology has thus been defined to improve design-time robustness evaluations of a circuit implemented on this type of technology. This methodology is based on runtime reconfiguration. The approach has then been evaluated on several technological targets, requiring the development of several fault injection environments. The study included for the first time the ATMEL AT40K family, with a unique and efficient reconfiguration mode. The second type of contribution is focused on the improvement at low cost of the robustness of designs implemented on SRAM-based FPGA platforms. We propose a selective protection approach exploiting resources unused by the application. The approach has been automated on several technological targets (Xilinx, Altera) and the efficiency has been analyzed by taking advantage of the fault injection techniques previously developed.SAVOIE-SCD - Bib.électronique (730659901) / SudocGRENOBLE1/INP-Bib.électronique (384210012) / SudocGRENOBLE2/3-Bib.électronique (384219901) / SudocSudocFranceF