65 research outputs found
Integrating Vehicle Slip and Yaw in Overarching Multi-Tiered Automated Vehicle Steering Control to Balance Path Following Accuracy, Gracefulness, and Safety
Balancing path following accuracy and error convergence with graceful motion
in steering control is challenging due to the competing nature of these
requirements, especially across a range of operating speeds and conditions.
This paper demonstrates that an integrated multi-tiered steering controller
considering the impact of slip on kinematic control, dynamic control, and
steering actuator rate commands achieves accurate and graceful path following.
This work is founded on multi-tiered sideslip and yaw-based models, which allow
derivation of controllers considering error due to sideslip and the mapping
between steering commands and graceful lateral motion. Observer based sideslip
estimates are combined with heading error in the kinematic controller to
provide feedforward slip compensation. Path following error is compensated by a
continuous Variable Structure Controller (VSC) using speed-based path manifolds
to balance graceful motion and error convergence. Resulting yaw rate commands
are used by a backstepping dynamic controller to generate steering rate
commands. A High Gain Observer (HGO) estimates sideslip and yaw rate for output
feedback control. Stability analysis of the output feedback controller is
provided, and peaking is resolved. The work focuses on lateral control alone so
that the steering controller can be combined with other speed controllers.
Field results provide comparisons to related approaches demonstrating
gracefulness and accuracy in different complex scenarios with varied weather
conditions and perturbations
Intelligent and Efficient Transport Systems
The aim of this book is to present a number of digital and technology solutions to real-world problems across transportation sectors and infrastructures. Nine chapters have been well prepared and organized with the core topics as follows:
-A guideline to evaluate the energy efficiency of a vehicle
-A guideline to design and evaluate an electric propulsion system
-Potential opportunities for intelligent transportation systems and smart cities
-The importance of system control and energy-power management in transportation systems and infrastructures
-Bespoke modeling tools and real-time simulation platforms for transportation system development
This book will be useful to a wide range of audiences: university staff and students, engineers, and business people working in relevant fields
System Design, Motion Modelling and Planning for a Recon figurable Wheeled Mobile Robot
Over the past ve decades the use of mobile robotic rovers to perform in-situ scienti c investigations on the surfaces of the Moon and Mars has been tremendously in uential in shaping our understanding of these extraterrestrial environments. As robotic missions have evolved there has been a greater desire to explore more unstructured terrain. This has exposed mobility limitations with conventional rover designs such as getting stuck in soft soil or simply not being able to access rugged terrain. Increased mobility and terrain traversability are key requirements when considering designs for next generation planetary rovers. Coupled with these requirements is the need to autonomously navigate unstructured terrain by taking full advantage of increased mobility. To address these issues, a high degree-of-freedom recon gurable platform that is capable of energy intensive legged locomotion in obstacle-rich terrain as well as wheeled locomotion in benign terrain is proposed. The complexities of the planning task that considers the high degree-of-freedom state space of this platform are considerable. A variant of asymptotically optimal sampling-based planners that exploits the presence of dominant sub-spaces within a recon gurable mobile robot's kinematic structure is proposed to increase path quality and ensure platform safety. The contributions of this thesis include: the design and implementation of a highly mobile planetary analogue rover; motion modelling of the platform to enable novel locomotion modes, along with experimental validation of each of these capabilities; the sampling-based HBFMT* planner that hierarchically considers sub-spaces to better guide search of the complete state space; and experimental validation of the planner with the physical platform that demonstrates how the planner exploits the robot's capabilities to uidly transition between various physical geometric con gurations and wheeled/legged locomotion modes
Proceedings of the ECCOMAS Thematic Conference on Multibody Dynamics 2015
This volume contains the full papers accepted for presentation at the ECCOMAS Thematic Conference on Multibody Dynamics 2015 held in the Barcelona School of Industrial Engineering, Universitat Politècnica de Catalunya, on June 29 - July 2, 2015. The ECCOMAS Thematic Conference on Multibody Dynamics is an international meeting held once every two years in a European country. Continuing the very successful series of past conferences that have been organized in Lisbon (2003), Madrid (2005), Milan (2007), Warsaw (2009), Brussels (2011) and Zagreb (2013); this edition will once again serve as a meeting point for the international researchers, scientists and experts from academia, research laboratories and industry working in the area of multibody dynamics. Applications are related to many fields of contemporary engineering, such as vehicle and railway systems, aeronautical and space vehicles, robotic manipulators, mechatronic and autonomous systems, smart structures, biomechanical systems and nanotechnologies. The topics of the conference include, but are not restricted to: ● Formulations and Numerical Methods ● Efficient Methods and Real-Time Applications ● Flexible Multibody Dynamics ● Contact Dynamics and Constraints ● Multiphysics and Coupled Problems ● Control and Optimization ● Software Development and Computer Technology ● Aerospace and Maritime Applications ● Biomechanics ● Railroad Vehicle Dynamics ● Road Vehicle Dynamics ● Robotics ● Benchmark ProblemsPostprint (published version
Online Control and Optimization of Directional Drilling
Directional Steering System (DSS) has been established for well drilling in the oilfield in order to accomplish high reservoir productivity and to improve accessibility of oil
reservoirs in complex locations. In this thesis, dynamic modeling of two different DSS
were developed and optimized using different control and optimization techniques. Firstly,
the Rotary Steerable System (RSS) which is the current state of the art of directional
steering systems. In this work, we address the problem of real time control of autonomous
RSS with unknown formation friction and rock strength. The work presents an online
control scheme for real time optimization of drilling parameters to maximize rate of
penetration and minimize the deviation from the planned well bore trajectory, stick-slip
oscillations, and bit wear. Nonlinear model for the drilling operation was developed using
energy balance equation, where rock specific energy is used to calculate the minimum
power required for a given rate of penetration. A proposed mass spring system was used to
represent the phenomena of stick-slip oscillation. The bit wear is mathematically
represented using Bourgoyne model. Secondly, the autonomous quad-rotor DSS which has
4 downhole motors, is considered. In this work, a novel feedback linearization controller
to cancel the nonlinear dynamics of a DSS is proposed. The proposed controller design
problem is formulated as an optimization problem for optimal settings of the controller
feedback gains. Gravitational Search Algorithm (GSA) is developed to search for optimal settings of the proposed controller. The objective function considered is to minimize the
tracking error and drilling efforts. Detailed mathematical formulation and computer
simulation were used for evaluation of the performance of the proposed techniques for both
systems, based on real well data
Design, Modeling and Control of a Two-wheel Balancing Robot Driven by BLDC Motors
The focus of this document is on the design, modeling, and control of a self-balancing two wheel robot, hereafter referred to as the balance bot, driven by independent brushless DC (BLDC) motors. The balance bot frame is composed of stacked layers allowing a lightweight, modular, and rigid mechanical design. The robot is actuated by a pair of brushless DC motors equipped with Hall effect sensors and encoders allowing determination of the angle and angular velocity of each wheel. Absolute orientation measurement is accomplished using a full 9-axis IMU consisting of a 3-axis gyroscope, a 3-axis accelerometer, and a 3-axis magnetometer.
The control algorithm is designed to minimize deviations from a set point specified by an external radio remote control, which allows the remote operator to steer and drive the bot wirelessly while it remains balanced. Multiple dynamic models are proposed in this analysis, and the selected model is used to develop a linear-quadratic regulator based state-feedback controller to perform reference tracking. Controller tracking performance is improved by incorporating a prefilter stage between the setpoint command from the remote control and the state-feedback controller.
Modeling of the actuator dynamics is considered brie y and is discussed in relation to the control algorithm used to balance the robot. Electrical and software design implementations are also presented with a focus on effective implementation of the proposed control algorithms.
Simulated and physical testing results show that the proposed balance bot and controller design are not only feasible but effective as a means of achieving robust performance under dynamic tracking profiles provided by the remote control
Multibody dynamics 2015
This volume contains the full papers accepted for presentation at the ECCOMAS Thematic Conference on Multibody Dynamics 2015 held in the Barcelona School of Industrial Engineering, Universitat Politècnica de Catalunya, on June 29 - July 2, 2015. The ECCOMAS Thematic Conference on Multibody Dynamics is an international meeting held once every two years in a European country. Continuing the very successful series of past conferences that have been organized in Lisbon (2003), Madrid (2005), Milan (2007), Warsaw (2009), Brussels (2011) and Zagreb (2013); this edition will once again serve as a meeting point for the international researchers, scientists and experts from academia, research laboratories and industry working in the area of multibody dynamics. Applications are related to many fields of contemporary engineering, such as vehicle and railway systems, aeronautical and space vehicles, robotic manipulators, mechatronic and autonomous systems, smart structures, biomechanical systems and nanotechnologies. The topics of the conference include, but are not restricted to: Formulations and Numerical Methods, Efficient Methods and Real-Time Applications, Flexible Multibody Dynamics, Contact Dynamics and Constraints, Multiphysics and Coupled Problems, Control and Optimization, Software Development and Computer Technology, Aerospace and Maritime Applications, Biomechanics, Railroad Vehicle Dynamics, Road Vehicle Dynamics, Robotics, Benchmark Problems. The conference is organized by the Department of Mechanical Engineering of the Universitat Politècnica de Catalunya (UPC) in Barcelona. The organizers would like to thank the authors for submitting their contributions, the keynote lecturers for accepting the invitation and for the quality of their talks, the awards and scientific committees for their support to the organization of the conference, and finally the topic organizers for reviewing all extended abstracts and selecting the awards nominees.Postprint (published version
- …