240 research outputs found
Recommended from our members
Noise shaping Asynchronous SAR ADC based time to digital converter
Time-to-digital converters (TDCs) are key elements for the digitization of timing information in modern mixed-signal circuits such as digital PLLs, DLLs, ADCs, and on-chip jitter-monitoring circuits. Especially, high-resolution TDCs are increasingly employed in on-chip timing tests, such as jitter and clock skew measurements, as advanced fabrication technologies allow fine on-chip time resolutions. Its main purpose is to quantize the time interval of a pulse signal or the time interval between the rising edges of two clock signals. Similarly to ADCs, the performance of TDCs are also primarily characterized by Resolution, Sampling Rate, FOM, SNDR, Dynamic Range and DNL/INL. This work proposes and demonstrates 2nd order noise shaping Asynchronous SAR ADC based TDC architecture with highest resolution of 0.25 ps among current state of art designs with respect to post-layout simulation results. This circuit is a combination of low power/High Resolution 2nd Order Noise Shaped Asynchronous SAR ADC backend with simple Time to Amplitude converter (TAC) front-end and is implemented in 40nm CMOS technology. Additionally, special emphasis is given on the discussion on various current state of art TDC architectures.Electrical and Computer Engineerin
A digital background calibration technique for pipeline ADCs
http://www.worldcat.org/oclc/4258158
Low power high speed and high accuracy design methodologies for pipeline Analog-to-Digital converters
Different aspects of power optimization of a high-speed, high-accuracy pipeline Analog-to-Digital Converters (ADCs) are considered to satisfy the current and future needs of portable communication devices. First power optimized design strategies for the amplifiers are introduced. Closed form expressions of power w.r.t settling requirements are presented to facilitate a fair comparison and selection of the amplifier structure. Next a new low offset dynamic comparator has been designed. Simulation based sensitivity analysis is performed to demonstrate the robustness of the new comparator with respect to stray capacitances, common mode voltage errors and timing errors. With simplified amplifier power model along with the use of dynamic comparators, a method to optimize the power consumption of a pipeline ADC with kT/C noise constraint is also developed. The total power dependence on capacitor scaling and stage resolution is investigated for a near-optimal solution.;After considering the power requirements of a pipeline ADC, design and statistical modeling of over-range protection requirements is investigated. Closed form statistical expressions for the over-range requirements are developed to assist in the allocation of the error budgets to different pipeline blocks. A new over-range protection algorithm is also developed that relaxes the amplifier design and power requirements.;Finally, two new CMOS Schmitt trigger designs are proposed which can be used as clock inputs for the pipeline ADC. In the new designs, sizing of the feedback inverters is used for independent trip point control. The new designs have also a modest reduction in sensitivity to process variations along with immunity to the kick-back noise without the addition of path delay
A Low Power Mid-Rail Dual Slope Analog-To-Digital Converter for Biomedical Instrumentation
There are an estimated 15 million babies born preterm every year and it is on the rise. The complications that arise from this can be quite severe and are the leading causes of death among children under 5 years of age. Among these complications is a condition known as apnea. This disorder is defined as the suspension of breathing during sleep for usually 10 to 30 seconds and can occur up to 20-30 times per hour for preterm infants. This lack of oxygen in the bloodstream can have troubling effects, such as brain damage and death if the apnea period is longer than expected. This creates a dire need to continuously monitor the respiration state of babies born prematurely. Given that the breathing signal is in analog form, a conversion to its digital counterpart is necessary.In this thesis, a novel low power analog-to-digital converter (ADC) for the digitization and analyzation of the respiration signal is presented. The design of the ADC demonstrates an innovative approach on how to operate on a single polarity supply system, which effectively doubles the sampling speed. The ADC has been realized in a standard 130 nm CMOS process
A Low-Power, Reconfigurable, Pipelined ADC with Automatic Adaptation for Implantable Bioimpedance Applications
Biomedical monitoring systems that observe various physiological parameters or electrochemical reactions typically cannot expect signals with fixed amplitude or frequency as signal properties can vary greatly even among similar biosignals. Furthermore, advancements in biomedical research have resulted in more elaborate biosignal monitoring schemes which allow the continuous acquisition of important patient information. Conventional ADCs with a fixed resolution and sampling rate are not able to adapt to signals with a wide range of variation. As a result, reconfigurable analog-to-digital converters (ADC) have become increasingly more attractive for implantable biosensor systems. These converters are able to change their operable resolution, sampling rate, or both in order convert changing signals with increased power efficiency.
Traditionally, biomedical sensing applications were limited to low frequencies. Therefore, much of the research on ADCs for biomedical applications focused on minimizing power consumption with smaller bias currents resulting in low sampling rates. However, recently bioimpedance monitoring has become more popular because of its healthcare possibilities. Bioimpedance monitoring involves injecting an AC current into a biosample and measuring the corresponding voltage drop. The frequency of the injected current greatly affects the amplitude and phase of the voltage drop as biological tissue is comprised of resistive and capacitive elements. For this reason, a full spectrum of measurements from 100 Hz to 10-100 MHz is required to gain a full understanding of the impedance. For this type of implantable biomedical application, the typical low power, low sampling rate analog-to-digital converter is insufficient. A different optimization of power and performance must be achieved.
Since SAR ADC power consumption scales heavily with sampling rate, the converters that sample fast enough to be attractive for bioimpedance monitoring do not have a figure-of-merit that is comparable to the slower converters. Therefore, an auto-adapting, reconfigurable pipelined analog-to-digital converter is proposed. The converter can operate with either 8 or 10 bits of resolution and with a sampling rate of 0.1 or 20 MS/s. Additionally, the resolution and sampling rate are automatically determined by the converter itself based on the input signal. This way, power efficiency is increased for input signals of varying frequency and amplitude
Error modeling, self-calibration and design of pipelined analog to digital converters
Typescript (photocopy).As the field of signal processing accelerates toward the use of high performance digital techniques, there is a growing need for increasingly fast and accurate analog to digital converters. Three highly visible examples of this trend originated in the last decade. The advent of the compact disc revolutionized the way high-fidelity audio is stored, reproduced, recorded and processed. Digital communication links, fiber optic cables and in the near future ISDN networks (Integrated Services Digital Network) are steadily replacing major portions of telephone systems. Finally, video-conferencing, multi-media computing and currently emerging high definition television (HDTV) systems rely more and more on real-time digital data compression and image enhancing techniques. All these applications rely on analog to digital conversion. In the field of digital audio, the required conversion accuracy is high, but the conversion speed limited (16 bits, 2 x 20 kHz signal bandwidth). In the field of image processing, the required accuracy is less, but the data conversion speed high (8-10 bits, 5-20MHz bandwidth). New applications keep pushing for increasing conversion rates and simultaneously higher accuracies. This dissertation discusses new analog to digital converter architectures that could accomplish this. As a consequence of the trend towards digital processing, prominent analog designers throughout the world have engaged in very active research on the topic of data conversion. Unfortunately, literature has not always kept up. At the time of this writing, it seemed rather difficult to find detailed fundamental publications about analog to digital converter design. This dissertation represents a modest attempt to remedy this situation. It is hoped that anyone with a back-ground in analog design could go through this work and pick up the fundamentals of converter operation, as well as a number of more advanced design techniques
Recommended from our members
Design and implementation of Radix-3/Radix-2 based novel hybrid SAR ADC in scaled CMOS technologies
This thesis focuses on low power and high speed design techniques for successive
approximation register (SAR) analog-to-digital converters (ADCs) in nanoscale
CMOS technologies. SAR ADCs’ speed is limited by the number of bits of
resolution. An N-bit conventional SAR ADC takes N conversion cycles. To speed
up the conversion process, we introduce a radix-3 SAR ADC which can compute
1:6 bits per cycle. To our knowledge, it is the first fully programmable and efficiently
hardware controlled radix-3 SAR ADC. We had to use two comparators per
cycle due to ADC architecture and we proposed a simple calibration scheme for
the comparators. Also, as the architecture of the DAC array is completely different
from the architecture of conventional radix-2 SAR ADC’s DAC arrays, we came up
with an algorithm for calibration of capacitors of the DAC.
Low power SAR ADCs face two major challenges especially at high resolutions:
(1) increased comparator power to suppress the noise, and (2) increased
DAC switching energy due to the large DAC size. Due to our proposed architecture,the radix-3 SAR ADC uses two comparators per cycle and two differential DACs.
To improve the comparator’s power efficiency, an efficient and low cost calibration
technique has been introduced. It allows a low power and noisy comparator to
achieve high signal-to-noise ratio (SNR).
To improve the DAC switching energy, we introduced a radix-3/radix-2
based novel hybrid SAR ADC. We use two single ended DACs for radix-3 SAR
ADC and these two single ended DACs can be used as one differential DAC for
radix-2 SAR ADC. So, overall, we only have a single DAC as conventional radix-
2 SAR ADC. In addition, a monotonic switching technique is adopted for radix-2
search to reduce the DAC capacitor size and hence, to reduce switching power. It
can reduce the total number of unit capacitors by four times. Our proposed hybrid
SAR ADC can achieve less DAC energy compared to radix-3 and radix-2 SAR
ADCs. Also, to utilize technology scaling, we used the minimum capacitor size
allowed by thermal noise limitations. To achieve high resolution, we introduced
calibration algorithm for the DAC array.
As mentioned earlier, the radix-3 SAR ADC offers higher power than conventional
radix-2 SAR ADC because of simultaneous use of two comparators. In
the proposed hybrid SAR ADC, we will be using radix-3 search for first few MSB
bits. So, the resolution required for radix-3 comparators are much larger than the
LSB value of 10-bit ADC. By implementing calibration of comparators, we can
use low power, high input referred offset and high speed comparators for radix-3
search. Radix-2 search will be used for rest of the bits and the resolution of the
radix-2 comparator has to be less than the required LSB value. So, a high power, low input referred offset and high speed comparator is used for radix-2 search.
Also, we introduced clock gating for comparators. So, radix-3 comparators will not
toggle during radix-2 search and the radix-2 comparators will be inactive during
radix-3 search. By using the aforementioned techniques, the overall comparator
power is definitely less than a radix-3 SAR ADC and comparable to a conventional
radix-2 SAR ADC.
A prototype radix-3/radix-2 based hybrid SAR ADC with the proposed
technique is designed and fabricated in 40nm CMOS technology. It achieves an
SNDR of 56.9 dB and consumes only 0.38 mW power at 30MS/s, leading to a
Walden figure of merit of 21.5 fJ/conv-step.Electrical and Computer Engineerin
- …