77,659 research outputs found
Deformation Control in Rest-to-Rest Motion of Mechanisms with Flexible Links
This paper develops and validates experimentally a feedback strategy for the reduction of the link deformations in rest-to-rest motion of mechanisms with flexible links, named Delayed Reference Control (DRC). The technique takes advantage of the inertial coupling between rigid-bodymotion and elasticmotion to control the undesired link deformations by shifting in time the position reference through an action reference parameter. The action reference parameter is computed on the fly based on the sensed strains by solving analytically an optimization problem. An outer control loop is closed to compute the references for the position controllers of each actuator, which can be thought of as the inner control loop. The resulting multiloop architecture of the DRC is a relevant advantage over several traditional feedback controllers: DRC can be implemented by just adding an outer control loop to standard position controllers. A validation of the proposed control strategy is provided by applying the DRC to the real-time control of a four-bar linkage
Dynamic Modeling and Simulation of a Rotating Single Link Flexible Robotic Manipulator Subject to Quick Stops
Single link robotic manipulators are extensively used in industry and research operations. The main design requirement of such manipulators is to minimize link dynamic deflection and its active end vibrations, and obtain high position accuracy during its high speed motion. To achieve these requirements, accurate mathematical modeling and simulation of the initial design, to increase system stability and precision and to obtain very small amplitudes of vibration, should be considered. In this paper the modeling of such robotic arm with a rigid guide and a flexible extensible link subject to quick stops after each complete revolution is considered and its dynamical behavior analyzed. The extensible link which rotates with constant angular velocity has one end constrained to a predefined trajectory. The constrained trajectory allows trajectory control and obstacle avoidance for the active end of the robotic arm. The dynamic evolution of the system is investigated and the flexural response of the flexible link analyzed under the combined effect of clearance and flexibility.
Benchmarking Cerebellar Control
Cerebellar models have long been advocated as viable models
for robot dynamics control. Building on an increasing insight
in and knowledge of the biological cerebellum, many models have been
greatly refined, of which some computational models have emerged
with useful properties with respect to robot dynamics control.
Looking at the application side, however, there is a totally different
picture. Not only is there not one robot on the market which uses
anything remotely connected with cerebellar control, but even in
research labs most testbeds for cerebellar models are restricted to
toy problems. Such applications hardly ever exceed the complexity of
a 2 DoF simulated robot arm; a task which is hardly representative for
the field of robotics, or relates to realistic applications.
In order to bring the amalgamation of the two fields forwards, we
advocate the use of a set of robotics benchmarks, on which existing
and new computational cerebellar models can be comparatively tested.
It is clear that the traditional approach to solve robotics dynamics
loses ground with the advancing complexity of robotic structures;
there is a desire for adaptive methods which can compete as traditional
control methods do for traditional robots.
In this paper we try to lay down the successes and problems in the
fields of cerebellar modelling as well as robot dynamics control.
By analyzing the common ground, a set of benchmarks is suggested
which may serve as typical robot applications for cerebellar models
Active network management for electrical distribution systems: problem formulation, benchmark, and approximate solution
With the increasing share of renewable and distributed generation in
electrical distribution systems, Active Network Management (ANM) becomes a
valuable option for a distribution system operator to operate his system in a
secure and cost-effective way without relying solely on network reinforcement.
ANM strategies are short-term policies that control the power injected by
generators and/or taken off by loads in order to avoid congestion or voltage
issues. Advanced ANM strategies imply that the system operator has to solve
large-scale optimal sequential decision-making problems under uncertainty. For
example, decisions taken at a given moment constrain the future decisions that
can be taken and uncertainty must be explicitly accounted for because neither
demand nor generation can be accurately forecasted. We first formulate the ANM
problem, which in addition to be sequential and uncertain, has a nonlinear
nature stemming from the power flow equations and a discrete nature arising
from the activation of power modulation signals. This ANM problem is then cast
as a stochastic mixed-integer nonlinear program, as well as second-order cone
and linear counterparts, for which we provide quantitative results using state
of the art solvers and perform a sensitivity analysis over the size of the
system, the amount of available flexibility, and the number of scenarios
considered in the deterministic equivalent of the stochastic program. To foster
further research on this problem, we make available at
http://www.montefiore.ulg.ac.be/~anm/ three test beds based on distribution
networks of 5, 33, and 77 buses. These test beds contain a simulator of the
distribution system, with stochastic models for the generation and consumption
devices, and callbacks to implement and test various ANM strategies
Experimental validation of docking and capture using space robotics testbeds
This presentation describes the application of robotic and computer vision systems to validate docking and capture operations for space cargo transfer vehicles. Three applications are discussed: (1) air bearing systems in two dimensions that yield high quality free-flying, flexible, and contact dynamics; (2) validation of docking mechanisms with misalignment and target dynamics; and (3) computer vision technology for target location and real-time tracking. All the testbeds are supported by a network of engineering workstations for dynamic and controls analyses. Dynamic simulation of multibody rigid and elastic systems are performed with the TREETOPS code. MATRIXx/System-Build and PRO-MATLAB/Simulab are the tools for control design and analysis using classical and modern techniques such as H-infinity and LQG/LTR. SANDY is a general design tool to optimize numerically a multivariable robust compensator with a user-defined structure. Mathematica and Macsyma are used to derive symbolically dynamic and kinematic equations
On the false positives and false negatives of the Jacobian Matrix in kinematically redundant parallel mechanisms
The Jacobian matrix is a highly popular tool for the control and performance analysis of closed-loop robots. Its usefulness in parallel mechanisms is certainly apparent, and its application to solve motion planning problems, or other higher level questions, has been seldom queried, or limited to non-redundant systems. In this paper, we discuss the shortcomings of the use of the Jacobian matrix under redundancy, in particular when applied to kinematically redundant parallel architectures with non-serially connected actuators. These architectures have become fairly popular recently as they allow the end-effector to achieve full rotations, which is an impossible task with traditional topologies. The problems with the Jacobian matrix in these novel systems arise from the need to eliminate redundant variables when forming it, resulting in both situations where the Jacobian incorrectly identifies singularities (false positive), and where it fails to identify singularities (false negative). These issues have thus far remained unaddressed in the literature. We highlight these limitations herein by demonstrating several cases using numerical examples of both planar and spatial architectures
- …