Timing error detection and correction for power efficiency: an aggressive scaling approach

Low-power consumption has become an important aspect of processors and systems design. Many techniques ranging from architectural to system level are available. Voltage scaling or frequency boosting methods are the most effective to achieve low-power consumption as the dynamic power is proportional to the frequency and to the square of the supply voltage. The basic principle of operation of aggressive voltage scaling is to adjust the supply voltage to the lowest level possible to achieve minimum power consumption while maintaining reliable operations. Similarly, aggressive frequency boosting is to alter the operating frequency to achieve optimum performance improvement. In this study, an aggressive technique which employs voltage or frequency varying hardware circuit with the time-borrowing feature is presented. The proposed technique double samples the data to detect any timing violations as the frequency/voltage is scaled. The detected violations are masked by phase delaying the flip-flop clock to capture the late arrival data. This makes the system timing error tolerant without incurring error correction timing penalty. The proposed technique is implemented in a field programmable gate array using a two-stage arithmetic pipeline. Results on various benchmarks clearly demonstrate the achieved power savings and performance improvement.N/

Design of variation-tolerant synchronizers for multiple clock and voltage domains

PhD ThesisParametric variability increasingly affects the performance of electronic circuits as the fabrication technology has reached the level of 32nm and beyond. These parameters may include transistor Process parameters (such as threshold voltage), supply Voltage and Temperature (PVT), all of which could have a significant impact on the speed and power consumption of the circuit, particularly if the variations exceed the design margins. As systems are designed with more asynchronous protocols, there is a need for highly robust synchronizers and arbiters. These components are often used as interfaces between communication links of different timing domains as well as sampling devices for asynchronous inputs coming from external components. These applications have created a need for new robust designs of synchronizers and arbiters that can tolerate process, voltage and temperature variations. The aim of this study was to investigate how synchronizers and arbiters should be designed to tolerate parametric variations. All investigations focused mainly on circuit-level and transistor level designs and were modeled and simulated in the UMC90nm CMOS technology process. Analog simulations were used to measure timing parameters and power consumption along with a “Monte Carlo” statistical analysis to account for process variations. Two main components of synchronizers and arbiters were primarily investigated: flip-flop and mutual-exclusion element (MUTEX). Both components can violate the input timing conditions, setup and hold window times, which could cause metastability inside their bistable elements and possibly end in failures. The mean-time between failures is an important reliability feature of any synchronizer delay through the synchronizer. The MUTEX study focused on the classical circuit, in addition to a number of tolerance, based on increasing internal gain by adding current sources, reducing the capacitive loading, boosting the transconductance of the latch, compensating the existing Miller capacitance, and adding asymmetry to maneuver the metastable point. The results showed that some circuits had little or almost no improvements, while five techniques showed significant improvements by reducing τ and maintaining high tolerance. Three design approaches are proposed to provide variation-tolerant synchronizers. wagging synchronizer proposed to First, the is significantly increase reliability over that of the conventional two flip-flop synchronizer. The robustness of the wagging technique can be enhanced by using robust τ latches or adding one more cycle of synchronization. The second approach is the Metastability Auto-Detection and Correction (MADAC) latch which relies on swiftly detecting a metastable event and correcting it by enforcing the previously stored logic value. This technique significantly reduces the resolution time down from uncertain synchronization technique is proposed to transfer signals between Multiple- Voltage Multiple-Clock Domains (MVD/MCD) that do not require conventional level-shifters between the domains or multiple power supplies within each domain. This interface circuit uses a synchronous set and feedback reset protocol which provides level-shifting and synchronization of all signals between the domains, from a wide range of voltage-supplies and clock frequencies. Overall, synchronizer circuits can tolerate variations to a greater extent by employing the wagging technique or using a MADAC latch, while MUTEX tolerance can suffice with small circuit modifications. Communication between MVD/MCD can be achieved by an asynchronous handshake without a need for adding level-shifters.The Saudi Arabian Embassy in London, Umm Al-Qura University, Saudi Arabi

inSense: A Variation and Fault Tolerant Architecture for Nanoscale Devices

Transistor technology scaling has been the driving force in improving the size, speed, and power consumption of digital systems. As devices approach atomic size, however, their reliability and performance are increasingly compromised due to reduced noise margins, difficulties in fabrication, and emergent nano-scale phenomena. Scaled CMOS devices, in particular, suffer from process variations such as random dopant fluctuation (RDF) and line edge roughness (LER), transistor degradation mechanisms such as negative-bias temperature instability (NBTI) and hot-carrier injection (HCI), and increased sensitivity to single event upsets (SEUs). Consequently, future devices may exhibit reduced performance, diminished lifetimes, and poor reliability. This research proposes a variation and fault tolerant architecture, the inSense architecture, as a circuit-level solution to the problems induced by the aforementioned phenomena. The inSense architecture entails augmenting circuits with introspective and sensory capabilities which are able to dynamically detect and compensate for process variations, transistor degradation, and soft errors. This approach creates ``smart\u27\u27 circuits able to function despite the use of unreliable devices and is applicable to current CMOS technology as well as next-generation devices using new materials and structures. Furthermore, this work presents an automated prototype implementation of the inSense architecture targeted to CMOS devices and is evaluated via implementation in ISCAS \u2785 benchmark circuits. The automated prototype implementation is functionally verified and characterized: it is found that error detection capability (with error windows from $\approx$30-400ps) can be added for less than 2\% area overhead for circuits of non-trivial complexity. Single event transient (SET) detection capability (configurable with target set-points) is found to be functional, although it generally tracks the standard DMR implementation with respect to overheads

A Novel Methodology for Error-Resilient Circuits in Near-Threshold Computing

Department of Electrical EngineeringThe main goal of designing VLSI system is high performance with low energy consumption. Actually, to realize the human-related techniques, such as internet of things (IoTs) and wearable devices, efficient power management techniques are required. Near threshold computing (NTC) is one of the most well-known techniques which is proposed for the trade-off between energy consumption and performance improvement. With this technique, the solution would be selected by the lowest energy with highest performance. However, NTC suffers a significant performance degradation, which is prone to timing errors. However, main goal of Integrated Circuit (IC) design is making the circuit to always operate correctly though worst-case condition. But, in order to make the circuit always work correctly, considerable area and power overheads may occur. As an alternative, better-than-worst-case (BTWC) design paradigm has been proposed. One of the main design of BTWC design includes error-resilient circuits which detect and correct timing errors, though they cause area and power overheads. In this thesis, we propose various design methodologies which provide an optimal implementation of error-resilient circuits. Slack-based, sensitivity-based methodology and modified Quine-McCluskey (Q-M) algorithm have been exploited to earn the minimum set of error-resilient circuits without any loss of detection ability. From sensitivity-based methodology, benchmark results show that the optimal designs reduces up to 46% monitoring area without compromising error detection ability of the initial error-resilient design. From the Quine-McCluskey (Q-M) algorithm, benchmark results show that optimal design reduces up to 72% of flip-flops which are required to be changed to error-resilient circuits without compromising an error detection ability. In addition, more power and area reduction can be possible when reasonable underestimation of error detection ability is accepted. Monte-Carlo analysis validates that our proposed method is tolerant to process variation.ope

Design and Analysis of Metastable-Hardened, High-Performance, Low-Power Flip-Flops

With rapid technology scaling, flip-flops are becoming more susceptible to metastability due to tighter timing budgets and the more prominent effects of process, temperature, and voltage variation that can result in frequent setup and hold time violations. This thesis presents a detailed methodology and analysis on the design of metastable-hardened, high-performance, and low-power flip-flops. The design of metastable-hardened flip-flops is focused on optimizing the value of τ mainly due to its exponential relationship with the metastability window δ and the mean-time-between-failure (MTBF). Through small-signal modeling, τ is determined to be a function of the load capacitance and the transconductance in the cross-coupled inverter pair for a given flip-flop architecture. In most cases, the reduction of τ comes at the expense of increased delay and power. Hence, two new design metrics, the metastability-delay-product (MDP) and the metastability-power-delay-product (MPDP), are proposed to analyze the tradeoffs between delay, power and τ. Post-layout simulation results have shown that the proposed optimum MPDP design can reduce the metastability window δ by at least an order of magnitude depending on the value of the settling time and the flip-flop architecture. In this work, we have proposed two new flip-flop designs: the pre-discharge flip-flop (PDFF) and the sense-amplifier-transmission-gate (SATG) based flip-flop. Both flip-flop architectures facilitate the usage in both single and dual-supply systems as reduced clock-swing flip-flop and level-converting flip-flop. With a cross-coupled inverter in the master-stage that increases the overall transconductance and a small load transistor associated with the critical node, the architecture of both the PDFF and the SATG is very attractive for the design of metastable-hardened, high-performance, and low-power flip-flops. The amount of overhead in delay, power, and area is all less than 10% under the optimum MPDP design scheme when compared to the traditional optimum PDP design. In designing for metastable-hardened and soft-error tolerant flip-flops, the main methodology is to improve the metastability performance in the master-stage while applying the soft-error tolerant cell in the slave-stage for protection against soft-error. The proposed flip-flops, PDFF-SE and SATG-SE, both utilize a cross-coupled inverter on the critical path in the master-stage and generate the required differential signals to facilitate the usage of the Quatro soft-error tolerant cell in the slave-stage

An Energy-Efficient System with Timing-Reliable Error-Detection Sequentials

A new type of energy-efficient digital system that integrate EDS and DVS circuits has been developed. In these systems, EDS-monitored paths convert the PVT variations into timing variations. Nevertheless, the conversion can suffer from the reliability issue (extrinsic EDS-reliability). EDS circuits detect the unfavorable timing variations (so called ``error'') and guide DVS circuits to adjust the operating voltage to a proper lower level to save the energy. However, the error detection is generally susceptible to the metastability problem (intrinsic EDS-reliability) due to the synchronizer in EDS circuits. The MTBF due to metastability is exponentially related to the synchronizer delay. This dissertation proposes a new EDS circuit deployment strategy to enhance the extrinsic EDS-reliability. This strategy requires neither buffer insertion nor an extra clock and is applicable for FPGA implementations. An FPGA-based Discrete Cosine Transform with EDS and DVS circuits deployed in this fashion demonstrates up to 16.5\% energy savings over a conventional design at equivalent frequency setting and image quality, with a 0.8\% logic element and 3.5\% maximum frequency penalties. VBSs are proposed to improve the synchronizer delay under single low-voltage supply environments. A VBS consists of a Jamb latch and a switched-capacitor-based charge pump that provides a voltage boost to the Jamb Latch to speed up the metastability resolution. The charge pump can be either CVBS or MVBS. A new methodology for extracting the metastability parameters of synchronizers under changing biasing currents is proposed. For a 1-year MTBF specification, MVBS and CVBS show 2.0 to 2.7 and 5.1 to 9.8 times the delay improvement over the basic Jamb latch, respectively, without large power consumption. Optimization techniques including transistor sizing, FBB and dynamic implementation are further applied. For a common MTBF specification at typical PVT conditions, the optimized MVBS and CVBS show 2.97 to 7.57 and 4.14 to 8.13 times the delay improvement over the basic Jamb latch, respectively. In post-Layout simulations, MVBS and CVBS are 1.84 and 2.63 times faster than the basic Jamb latch, respectively

Integrated Circuit Design for Radiation Sensing and Hardening.

Beyond the 1950s, integrated circuits have been widely used in a number of electronic devices surrounding people’s lives. In addition to computing electronics, scientific and medical equipment have also been undergone a metamorphosis, especially in radiation related fields where compact and precision radiation detection systems for nuclear power plants, positron emission tomography (PET), and radiation hardened by design (RHBD) circuits for space applications fabricated in advanced manufacturing technologies are exposed to the non-negligible probability of soft errors by radiation impact events. The integrated circuit design for radiation measurement equipment not only leads to numerous advantages on size and power consumption, but also raises many challenges regarding the speed and noise to replace conventional design modalities. This thesis presents solutions to front-end receiver designs for radiation sensors as well as an error detection and correction method to microprocessor designs under the condition of soft error occurrence. For the first preamplifier design, a novel technique that enhances the bandwidth and suppresses the input current noise by using two inductors is discussed. With the dual-inductor TIA signal processing configuration, one can reduce the fabrication cost, the area overhead, and the power consumption in a fast readout package. The second front-end receiver is a novel detector capacitance compensation technique by using the Miller effect. The fabricated CSA exhibits minimal variation in the pulse shape as the detector capacitance is increased. Lastly, a modified D flip-flop is discussed that is called Razor-Lite using charge-sharing at internal nodes to provide a compact EDAC design for modern well-balanced processors and RHBD against soft errors by SEE.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/111548/1/iykwon_1.pd

Architecture Independent Timing Speculation Techniques in VLSI Circuits.

Conventional digital circuits must ensure correct operation throughout a wide range of operating conditions including process, voltage, and temperature variation. These conditions have an effect on circuit delays, and safety margins must be put in place which come at a power and performance cost. The Razor system proposed eliminating these timing margins by running a circuit with occasional timing errors and correcting the errors when they occur. Several existing Razor style designs have been proposed, however prior to this work, Razor could not be applied blindly or automatically to designs, as the various error correction schemes modified the architecture of the target design. Because of the architectural invasiveness and design complexities of these techniques, no published Razor style system had been applied to a complete existing commercial processor. Additionally, in all prior Razor-style systems, there is a fundamental tradeoff between speculation window and short path, or minimum delay, constraints, limiting the technique’s effectiveness. This thesis introduces the concept of Razor using two-phase latch based timing. By identifying and utilizing time borrowing as an error correction mechanism, it allows for Razor to be applied without the need to reload data or replay instructions. This allows for Razor to be blindly and automatically applied to existing designs without detailed knowledge of internal architecture. Additionally, latch based Razor allows for large speculation windows, up to 100% of nominal circuit delay, because it breaks the connection between minimum delay constraints and speculation window. By demonstrating how to transform conventional flip-flop based designs, including those which make use of clock gating, to two-phase latch based timing, Razor can be automatically added to a large set of existing digital designs. Two forms of latch based Razor are proposed. First, Bubble Razor involves rippling stall cycles throughout a circuit in response to timing errors and is applied to the ARM Cortex-M3 processor, the first ever application of a Razor technique to a complete, existing processor design. Additional work applies Bubble Razor to the ARM Cortex-R4 processor. The second latch based Razor technique, Voltage Razor, uses voltage boosting to correct for timing errors.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/102461/1/mfojtik_1.pd