Thin Flexible Radio Frequency Identification Tags And Subsystems Thereof

Embodiments according to the present invention comprised RFID tags comprised of components disposed on a flexible conformal substrate. The substrate may be substantially transparent or opaque and the components may be comprised of organic electronic components. Components and circuits may be manufactured using thin-film deposition processes or by deposition of metal-containing inks using inkjet technology. Exemplary use of an embodiment according to the present invention is as a component in an on-vehicle radio-frequency (RF) automated toll system.Georgia Tech Research Corporatio

New Analysis and Design of a RF Rectifier for RFID and Implantable Devices

New design and optimization of charge pump rectifiers using diode-connected MOS transistors is presented in this paper. An analysis of the output voltage and Power Conversion Efficiency (PCE) is given to guide and evaluate the new design. A novel diode-connected MOS transistor for UHF rectifiers is presented and optimized, and a high efficiency N-stage charge pump rectifier based on this new diode-connected MOS transistor is designed and fabricated in a SMIC 0.18-μm 2P3M CMOS embedded EEPROM process. The new diode achieves 315 mV turn-on voltage and 415 nA reverse saturation leakage current. Compared with the traditional rectifier, the one based on the proposed diode-connected MOS has higher PCE, higher output voltage and smaller ripple coefficient. When the RF input is a 900-MHz sinusoid signal with the power ranging from −15 dBm to −4 dBm, PCEs of the charge pump rectifier with only 3-stage are more than 30%, and the maximum output voltage is 5.5 V, and its ripple coefficients are less than 1%. Therefore, the rectifier is especially suitableto passive UHF RFID tag IC and implantable devices

Enabling Self-Powered Autonomous Wireless Sensors with New-Generation I2C-RFID Chips

A self-powered autonomous RFID device with sensing and computing capabilities is presented in this paper. Powered by an RF energy-harvesting circuit enhanced by a DC-DC voltage booster in silicon-on-insulator (SOI) technology, the device relies on a microcontroller and a new generation I2C-RFID chip to wirelessly deliver sensor data to standard RFID EPC Class-1 Generation-2 (Gen2) readers. When the RF power received from the interrogating reader is -14 dBm or higher, the device, fabricated on an FR4 substrate using low-cost discrete components, is able to produce 2.4-V DC voltage to power its circuitry. The experimental results demonstrate the effectiveness of the device to perform reliable sensor data transmissions up to 5 meters in fully-passive mode. To the best of our knowledge, this represents the longest read range ever reported for passive UHF RFID sensors compliant with the EPC Gen2 standard

Architecture of Micro Energy Harvesting Using Hybrid Input of RF, Thermal and Vibration for Semi-Active RFID Tag

This research work presents a novel architecture of Hybrid Input Energy Harvester (HIEH) system for semi-active Radio Frequency Identification (RFID) tags. The proposed architecture consists of three input sources of energy which are radio frequency signal, thermal and vibration. The main purpose is to solve the semi-active RFID tags limited lifespan issues due to the need for batteries to power their circuitries. The focus will be on the rectifiers and DC-DC converter circuits with an ultra-low power design to ensure low power consumption in the system. The design architecture will be modelled and simulated using PSpice software, Verilog coding using Mentor Graphics and real-time verification using field-programmable gate array board before being implemented in a 0.13 µm CMOS technology. Our expectations of the results from this architecture are it can deliver 3.3 V of output voltage, 6.5 mW of output power and 90% of efficiency when all input sources are simultaneously harvested. The contribution of this work is it able to extend the lifetime of semi-active tag by supplying electrical energy continuously to the device. Thus, this will indirectly  reduce the energy limitation problem, eliminate the dependency on batteries and make it possible to achieve a batteryless device.This research work presents a novel architecture of Hybrid Input Energy Harvester (HIEH) system for semi-active Radio Frequency Identification (RFID) tags. The proposed architecture consists of three input sources of energy which are radio frequency signal, thermal and vibration. The main purpose is to solve the semi-active RFID tags limited lifespan issues due to the need for batteries to power their circuitries. The focus will be on the rectifiers and DC-DC converter circuits with an ultra-low power design to ensure low power consumption in the system. The design architecture will be modelled and simulated using PSpice software, Verilog coding using Mentor Graphics and real-time verification using field-programmable gate array board before being implemented in a 0.13 µm CMOS technology. Our expectations of the results from this architecture are it can deliver 3.3 V of output voltage, 6.5 mW of output power and 90% of efficiency when all input sources are simultaneously harvested. The contribution of this work is it able to extend the lifetime of semi-active tag by supplying electrical energy continuously to the device. Thus, this will indirectly  reduce the energy limitation problem, eliminate the dependency on batteries and make it possible to achieve a batteryless device

Design of Energy Harvester Module with a Low RF Power Input for UHF RFID Tag

An UHF RFID system is required to be able to operate at long range coverage, typically at 1-4 m. As a result, the RF signal power received at RFID Tag is very low, typically at -10 dBm. Moreover, practically most of commercially used RFID Tag is passive, which means that it solely relies on the RF signal transmitted from the RFID reader as the power source. Therefore, it is mandatory and critical to design an efficient and low input power RFID Tag system. In this paper, an energy harvester module for UHF RFID Tag, which is able to work at low RF input signal power and generate a stable DC voltage output, is designed. The module is able to operate at a very low RF input power as low as -10 dBm or equal to 100 mVpeak of induced voltage. To obtain such performance, a modified and optimized rectifier-using a Dynamic Vth Cancellation technique, is designed. By using this technique, the rectifier is able to produce an efficient and a high output voltage. Additionally, bandgap reference and voltage regulator circuits are designed to be independent of power supply and temperature variation. As the result, a stable DC power supply output is able to be generated. All the circuits are designed on Silterra 130nm CMOS technology. This technology allows us to design the transistor to operate at a low threshold voltage of 0.1 V, which is very suitable for the application of low input power UHF RFID Tag system

UHF Energy Harvesting and Power Management

As we are entering the era of Internet of Things (i.e. IoT), the physical devices become increasingly connected with each other than ever before. The connection between devices is achieved through wireless communication schemes, which unfortunately consume a significant amount of energy. This is undesirable for devices which are not directly connected to power. This is because these devices will essentially carry batteries to supply the needed energy for these operations and the batteries will eventually be depleted. This motivates the need to operate these devices off harvested energy. UHF energy harvesting, as an enabling technology for the UHF RFID, stands out amongst other energy harvesting approaches as it does not heavily rely on the natural surrounding environment and also offers a very good wireless operating range from its radiating energy source. Unlike the RFID, the power consumption and the operational range requirement of these IoT devices can vary significantly. Thus, the design of the RF energy harvesting front-end and the power management need to be re-thought for specific applications. To that end, in this thesis, discussions mainly evolve around the design of UHF energy harvesters and their associated power management units using lower power analog approaches. First, we present the background of the low power UHF energy harvesting, specially threshold-compensated rectifiers will be presented as a key technology in this area and this will be used as a build practical harvester for the UHF RFID application. Secondly, key issues with the threshold compensation will be identified and this is exploited either (i) to improve the dynamic power conversion efficiency of the harvester, (ii) to improve dynamic settling behaviour of the harvester. To exploit the ”left-over” harvested energy, an intelligent integrated power management solution has been proposed. Finally, the charge-burst approach is exploited to implement an energy harvester with -40 dBm input power sensitivity.Thesis (Ph.D.) -- University of Adelaide, School of Electrical & Electronic Engineering, 201

Radio Frequency Energy Harvesting - Sources and Techniques

Energy harvesting technology is attracting huge attention and holds a promising future for generating electrical power. This process offers various environmentally friendly alternative energy sources. Especially, radio frequency (RF) energy has interesting key attributes that make it very attractive for low-power consumer electronics and wireless sensor networks (WSNs). Ambient RF energy could be provided by commercial RF broadcasting stations such as TV, GSM, Wi-Fi, or radar. In this study, particular attention is given to radio frequency energy harvesting (RFEH) as a green technology, which is very suitable for overcoming problems related to wireless sensor nodes located in harsh environments or inaccessible places. The aim of this paper is to review the progress achievements, the current approaches, and the future directions in the field of RF harvesting energy. Therefore, our aim is to provide RF energy harvesting techniques that open the possibility to power directly electronics or recharge secondary batteries. As a result, this overview is expected to lead to relevant techniques for developing an efficient RF energy harvesting system