4,254 research outputs found
Multipath Parameter Estimation from OFDM Signals in Mobile Channels
We study multipath parameter estimation from orthogonal frequency division
multiplex signals transmitted over doubly dispersive mobile radio channels. We
are interested in cases where the transmission is long enough to suffer time
selectivity, but short enough such that the time variation can be accurately
modeled as depending only on per-tap linear phase variations due to Doppler
effects. We therefore concentrate on the estimation of the complex gain, delay
and Doppler offset of each tap of the multipath channel impulse response. We
show that the frequency domain channel coefficients for an entire packet can be
expressed as the superimposition of two-dimensional complex sinusoids. The
maximum likelihood estimate requires solution of a multidimensional non-linear
least squares problem, which is computationally infeasible in practice. We
therefore propose a low complexity suboptimal solution based on iterative
successive and parallel cancellation. First, initial delay/Doppler estimates
are obtained via successive cancellation. These estimates are then refined
using an iterative parallel cancellation procedure. We demonstrate via Monte
Carlo simulations that the root mean squared error statistics of our estimator
are very close to the Cramer-Rao lower bound of a single two-dimensional
sinusoid in Gaussian noise.Comment: Submitted to IEEE Transactions on Wireless Communications (26 pages,
9 figures and 3 tables
Interference Localization for Uplink OFDMA Systems in Presence of CFOs
Multiple carrier frequency offsets (CFOs) present in the uplink of orthogonal
frequency division multiple access (OFDMA) systems adversely affect subcarrier
orthogonality and impose a serious performance loss. In this paper, we propose
the application of time domain receiver windowing to concentrate the leakage
caused by CFOs to a few adjacent subcarriers with almost no additional
computational complexity. This allows us to approximate the interference matrix
with a quasi-banded matrix by neglecting small elements outside a certain band
which enables robust and computationally efficient signal detection. The
proposed CFO compensation technique is applicable to all types of subcarrier
assignment techniques. Simulation results show that the quasi-banded
approximation of the interference matrix is accurate enough to provide almost
the same bit error rate performance as that of the optimal solution. The
excellent performance of our proposed method is also proven through running an
experiment using our FPGA-based system setup.Comment: Accepted in IEEE WCNC 201
A selective control information detection scheme for OFDM receivers
In wireless communications, both control information and payload (user-data) are concurrently transmitted and required to be successfully recovered. This paper focuses on block-level detection, which is applicable for detecting transmitted control information, particularly when this information is selected or chosen from a finite set of information that are known at both transmitting and receiving devices. Using an orthogonal frequency division multiplexing architecture, this paper investigates and evaluates the performance of a time-domain decision criterion in comparison with a form of Maximum Likelihood (ML) estimation method. Unlike the ML method, the proposed time-domain detection technique requires no channel estimation as it uses the correlation (in the time-domain) that exists between the received and the transmitted selective information as a means of detection. In comparison with the ML method, results show that the proposed method offers improved detection performance, particularly when the control information consists of at least 16. However, the implementation of the proposed method requires a slightly increased number of mathematical computations
MIMO signal processing in offset-QAM based filter bank multicarrier systems
Next-generation communication systems have to comply with very strict requirements for increased flexibility in heterogeneous environments, high spectral efficiency, and agility of carrier aggregation. This fact motivates research in advanced multicarrier modulation (MCM) schemes, such as filter bank-based multicarrier (FBMC) modulation. This paper focuses on the offset quadrature amplitude modulation (OQAM)-based FBMC variant, known as FBMC/OQAM, which presents outstanding spectral efficiency and confinement in a number of channels and applications. Its special nature, however, generates a number of new signal processing challenges that are not present in other MCM schemes, notably, in orthogonal-frequency-division multiplexing (OFDM). In multiple-input multiple-output (MIMO) architectures, which are expected to play a primary role in future communication systems, these challenges are intensified, creating new interesting research problems and calling for new ideas and methods that are adapted to the particularities of the MIMO-FBMC/OQAM system. The goal of this paper is to focus on these signal processing problems and provide a concise yet comprehensive overview of the recent advances in this area. Open problems and associated directions for future research are also discussed.Peer ReviewedPostprint (author's final draft
AirSync: Enabling Distributed Multiuser MIMO with Full Spatial Multiplexing
The enormous success of advanced wireless devices is pushing the demand for
higher wireless data rates. Denser spectrum reuse through the deployment of
more access points per square mile has the potential to successfully meet the
increasing demand for more bandwidth. In theory, the best approach to density
increase is via distributed multiuser MIMO, where several access points are
connected to a central server and operate as a large distributed multi-antenna
access point, ensuring that all transmitted signal power serves the purpose of
data transmission, rather than creating "interference." In practice, while
enterprise networks offer a natural setup in which distributed MIMO might be
possible, there are serious implementation difficulties, the primary one being
the need to eliminate phase and timing offsets between the jointly coordinated
access points.
In this paper we propose AirSync, a novel scheme which provides not only time
but also phase synchronization, thus enabling distributed MIMO with full
spatial multiplexing gains. AirSync locks the phase of all access points using
a common reference broadcasted over the air in conjunction with a Kalman filter
which closely tracks the phase drift. We have implemented AirSync as a digital
circuit in the FPGA of the WARP radio platform. Our experimental testbed,
comprised of two access points and two clients, shows that AirSync is able to
achieve phase synchronization within a few degrees, and allows the system to
nearly achieve the theoretical optimal multiplexing gain. We also discuss MAC
and higher layer aspects of a practical deployment. To the best of our
knowledge, AirSync offers the first ever realization of the full multiuser MIMO
gain, namely the ability to increase the number of wireless clients linearly
with the number of jointly coordinated access points, without reducing the per
client rate.Comment: Submitted to Transactions on Networkin
- âŠ