Service quality measurements for IPv6 inter-networks

Measurement-based performance evaluation of network traffic is becoming very important, especially for networks trying to provide differentiated levels of service quality to the different application flows. The non-identical response of flows to the different types of network-imposed performance degradation raises the need for ubiquitous measurement mechanisms, able to measure numerous performance properties, and being equally applicable to different applications and transports. This paper presents a new measurement mechanism, facilitated by the steady introduction of IPv6 in network nodes and hosts, which exploits native features of the protocol to provide support for performance measurements at the network (IP) layer. IPv6 Extension Headers have been used to carry the triggers involving the measurement activity and the measurement data in-line with the payload data itself, providing a high level of probability that the behaviour of the real user traffic flows is observed. End-to-end one-way delay, jitter, loss, and throughput have been measured for applications operating on top of both reliable and unreliable transports, over different-capacity IPv6 network configurations. We conclude that this technique could form the basis for future Internet measurements that can be dynamically deployed where and when required in a multi-service IP environment

Cooperative data transfers for 5G networks

The demand for higher capacity, higher data rate and larger bandwidth has driven the research and industrial world to develop next generation wireless communication technology, namely, the 5G. Among all the approaches proposed for such a high demand, only the cooperative communication approach promises to significantly improve of the performances (capacity, data rate, bandwidth, etc.) with a low cost. In this thesis, we propose a D2D communication scheme as a solution for the out-door scenario and a cooperative scheme among the access infrastructures as the in-door scenario solution. In the first part, we address the implementation of content-centric routing in a D2D architecture for Android devices based on WiFi Direct, a protocol recently standardised by the Wi-Fi Alliance. After discussing the creation of multiple D2D groups, we introduce novel paradigms featuring intra- and inter-group bidirectional communication. We then present the primitives involved in content advertising and requesting among members of the multi-group network. In addition to the communications, we also devise a mechanism to enable the devices to spontaneously establish the multi-group D2D network. Finally, we evaluate the performance of our architecture and the network formation mechanism in a real testbed consisting of Android devices. In the second part, we propose, implement and evaluate a bandwidth aggregation service for residential users that allows to improve the upload throughput of the ADSL connection by leveraging the unused bandwidth of neighboring users. The residential access gateway adopts the 802.11 radio interface to simultaneously serve the local home users and to share the broadband connectivity with neighboring access gateways. Differently from previous works, our aggregation scheme is transparent both for local users, who are not required to modify their applications or device drivers, and for neighboring users, who do not experience any meaningful performance degradation. In order to evaluate the achievable performance and tune the parameters driving the traffic balancing, we developed a fluid model which was shown experimentally to be very accurate. Our proposed scheme is amenable to efficient implementation on Linux networking stack. Indeed, we implemented it and tested in some realistic scenarios, showing an efficient exploitation of the whole available bandwidth, also for legacy cloud storage applications

On the Statistical Characterization of Flows in Internet Traffic with Application to Sampling

A new method of estimating some statistical characteristics of TCP flows in the Internet is developed in this paper. For this purpose, a new set of random variables (referred to as observables) is defined. When dealing with sampled traffic, these observables can easily be computed from sampled data. By adopting a convenient mouse/elephant dichotomy also dependent on traffic, it is shown how these variables give a reliable statistical representation of the number of packets transmitted by large flows during successive time intervals with an appropriate duration. A mathematical framework is developed to estimate the accuracy of the method. As an application, it is shown how one can estimate the number of large TCP flows when only sampled traffic is available. The algorithm proposed is tested against experimental data collected from different types of IP networks

Resource dimensioning through buffer sampling

Link dimensioning, i.e., selecting a (minimal) link capacity such that the users’ performance requirements are met, is a crucial component of network design. It requires insight into the interrelationship among the traffic offered (in terms of the mean offered load , but also its fluctuation around the mean, i.e., ‘burstiness’), the envisioned performance level, and the capacity needed. We first derive, for different performance criteria, theoretical dimensioning formulas that estimate the required capacity $c$ as a function of the input traffic and the performance target. For the special case of Gaussian input traffic, these formulas reduce to $c = M + \alpha V$, where directly relates to the performance requirement (as agreed upon in a service level agreement) and $V$ reflects the burstiness (at the timescale of interest). We also observe that Gaussianity applies for virtually all realistic scenarios; notably, already for a relatively low aggregation level, the Gaussianity assumption is justified.\ud As estimating $M$ is relatively straightforward, the remaining open issue concerns the estimation of $V$. We argue that particularly if corresponds to small time-scales, it may be inaccurate to estimate it directly from the traffic traces. Therefore, we propose an indirect method that samples the buffer content, estimates the buffer content distribution, and ‘inverts’ this to the variance. We validate the inversion through extensive numerical experiments (using a sizeable collection of traffic traces from various representative locations); the resulting estimate of $V$ is then inserted in the dimensioning formula. These experiments show that both the inversion and the dimensioning formula are remarkably accurate

Resource dimensioning through buffer sampling

Link dimensioning, i.e., selecting a (minimal) link capacity such that the users’ performance requirements are met, is a crucial component of network design. It requires insight into the interrelationship between the traffic offered (in terms of the mean offered load M, but also its fluctuation around the mean, i.e., ‘burstiness’), the envisioned performance level, and the capacity needed. We first derive, for different performance criteria, theoretical dimensioning formulae that estimate the required capacity C as a function of the input traffic and the performance target. For the special case of Gaussian input traffic these formulae reduce to C = M+V , where directly relates to the performance requirement (as agreed upon in a service level agreement) and V reflects the burstiness (at the timescale of interest). We also observe that Gaussianity applies for virtually all realistic scenarios; notably, already for a relatively low aggregation level the Gaussianity assumption is justified.\ud As estimating M is relatively straightforward, the remaining open issue concerns the estimation of V . We argue that, particularly if V corresponds to small time-scales, it may be inaccurate to estimate it directly from the traffic traces. Therefore, we propose an indirect method that samples the buffer content, estimates the buffer content distribution, and ‘inverts’ this to the variance. We validate the inversion through extensive numerical experiments (using a sizeable collection of traffic traces from various representative locations); the resulting estimate of V is then inserted in the dimensioning formula. These experiments show that both the inversion and the dimensioning formula are remarkably accurate

Evaluation of

To offer users a sufficient performance level, network links should be properly provisioned. The required bandwidth capacity may be determined through the use of a model of the real network traffic. In this paper, we study the use of two classes of traffic models: (i

Cross-Layer Peer-to-Peer Track Identification and Optimization Based on Active Networking

P2P applications appear to emerge as ultimate killer applications due to their ability to construct highly dynamic overlay topologies with rapidly-varying and unpredictable traffic dynamics, which can constitute a serious challenge even for significantly over-provisioned IP networks. As a result, ISPs are facing new, severe network management problems that are not guaranteed to be addressed by statically deployed network engineering mechanisms. As a first step to a more complete solution to these problems, this paper proposes a P2P measurement, identification and optimisation architecture, designed to cope with the dynamicity and unpredictability of existing, well-known and future, unknown P2P systems. The purpose of this architecture is to provide to the ISPs an effective and scalable approach to control and optimise the traffic produced by P2P applications in their networks. This can be achieved through a combination of different application and network-level programmable techniques, leading to a crosslayer identification and optimisation process. These techniques can be applied using Active Networking platforms, which are able to quickly and easily deploy architectural components on demand. This flexibility of the optimisation architecture is essential to address the rapid development of new P2P protocols and the variation of known protocols