Area spectral efficiency of soft-decision space–time–frequency shift-keying-aided slow-frequency-hopping multiple access

Slow-frequency-hopping multiple access (SFHMA) can provide inherent frequency diversity and beneficially randomize the effects of cochannel interference. It may also be advantageously combined with our novel space-time–frequency shift keying (STFSK) scheme. The proposed system’s area spectral efficiency is investigated in various cellular frequency reuse structures. Furthermore, it is compared to both classic Gaussian minimum shift keying (GMSK)-aided SFHMA and GMSK-assisted time- division/frequency-division multiple access (TD/FDMA). The more sophisticated third-generation wideband code-division multiple access (WCDMA) and the fourth-generation Long Term Evolution (LTE) systems were also included in our comparisons. We demonstrate that the area spectral efficiency of the STFSK-aided SFHMA system is higher than the GMSK-aided SFHMA and TD/FDMA systems, as well as WCDMA, but it is only 60% of the LTE system

Design and implementation of a downlink MC-CDMA receiver

Cette thèse présente une étude d'un système complet de transmission en liaison descendante utilisant la technologie multi-porteuse avec l'accès multiple par division de code (Multi-Carrier Code Division Multiple Access, MC-CDMA). L'étude inclut la synchronisation et l'estimation du canal pour un système MC-CDMA en liaison descendante ainsi que l'implémentation sur puce FPGA d'un récepteur MC-CDMA en liaison descendante en bande de base. Le MC-CDMA est une combinaison de la technique de multiplexage par fréquence orthogonale (Orthogonal Frequency Division Multiplexing, OFDM) et de l'accès multiple par répartition de code (CDMA), et ce dans le but d'intégrer les deux technologies. Le système MC-CDMA est conçu pour fonctionner à l'intérieur de la contrainte d'une bande de fréquence de 5 MHz pour les modèles de canaux intérieur/extérieur pédestre et véhiculaire tel que décrit par le "Third Genaration Partnership Project" (3GPP). La composante OFDM du système MC-CDMA a été simulée en utilisant le logiciel MATLAB dans le but d'obtenir des paramètres de base. Des codes orthogonaux à facteur d'étalement variable (OVSF) de longueur 8 ont été choisis comme codes d'étalement pour notre système MC-CDMA. Ceci permet de supporter des taux de transmission maximum jusquà 20.6 Mbps et 22.875 Mbps (données non codées, pleine charge de 8 utilisateurs) pour les canaux intérieur/extérieur pédestre et véhiculaire, respectivement. Une étude analytique des expressions de taux d'erreur binaire pour le MC-CDMA dans un canal multivoies de Rayleigh a été réalisée dans le but d'évaluer rapidement et de façon précise les performances. Des techniques d'estimation de canal basées sur les décisions antérieures ont été étudiées afin d'améliorer encore plus les performances de taux d'erreur binaire du système MC-CDMA en liaison descendante. L'estimateur de canal basé sur les décisions antérieures et utilisant le critère de l'erreur quadratique minimale linéaire avec une matrice' de corrélation du canal de taille 64 x 64 a été choisi comme étant un bon compromis entre la performance et la complexité pour une implementation sur puce FPGA. Une nouvelle séquence d'apprentissage a été conçue pour le récepteur dans la configuration intérieur/extérieur pédestre dans le but d'estimer de façon grossière le temps de synchronisation et le décalage fréquentiel fractionnaire de la porteuse dans le domaine du temps. Les estimations fines du temps de synchronisation et du décalage fréquentiel de la porteuse ont été effectués dans le domaine des fréquences à l'aide de sous-porteuses pilotes. Un récepteur en liaison descendante MC-CDMA complet pour le canal intérieur /extérieur pédestre avec les synchronisations en temps et en fréquence en boucle fermée a été simulé avant de procéder à l'implémentation matérielle. Le récepteur en liaison descendante en bande de base pour le canal intérieur/extérieur pédestre a été implémenté sur un système de développement fabriqué par la compagnie Nallatech et utilisant le circuit XtremeDSP de Xilinx. Un transmetteur compatible avec le système de réception a également été réalisé. Des tests fonctionnels du récepteur ont été effectués dans un environnement sans fil statique de laboratoire. Un environnement de test plus dynamique, incluant la mobilité du transmetteur, du récepteur ou des éléments dispersifs, aurait été souhaitable, mais n'a pu être réalisé étant donné les difficultés logistiques inhérentes. Les taux d'erreur binaire mesurés avec différents nombres d'usagers actifs et différentes modulations sont proches des simulations sur ordinateurs pour un canal avec bruit blanc gaussien additif

ワイヤレス通信のための先進的な信号処理技術を用いた非線形補償法の研究

The inherit nonlinearity in analogue front-ends of transmitters and receivers have had primary impact on the overall performance of the wireless communication systems, as it gives arise of substantial distortion when transmitting and processing signals with such circuits. Therefore, the nonlinear compensation (linearization) techniques become essential to suppress the distortion to an acceptable extent in order to ensure sufficient low bit error rate. Furthermore, the increasing demands on higher data rate and ubiquitous interoperability between various multi-coverage protocols are two of the most important features of the contemporary communication system. The former demand pushes the communication system to use wider bandwidth and the latter one brings up severe coexistence problems. Having fully considered the problems raised above, the work in this Ph.D. thesis carries out extensive researches on the nonlinear compensations utilizing advanced digital signal processing techniques. The motivation behind this is to push more processing tasks to the digital domain, as it can potentially cut down the bill of materials (BOM) costs paid for the off-chip devices and reduce practical implementation difficulties. The work here is carried out using three approaches: numerical analysis & computer simulations; experimental tests using commercial instruments; actual implementation with FPGA. The primary contributions for this thesis are summarized as the following three points: 1) An adaptive digital predistortion (DPD) with fast convergence rate and low complexity for multi-carrier GSM system is presented. Albeit a legacy system, the GSM, however, has a very strict requirement on the out-of-band emission, thus it represents a much more difficult hurdle for DPD application. It is successfully implemented in an FPGA without using any other auxiliary processor. A simplified multiplier-free NLMS algorithm, especially suitable for FPGA implementation, for fast adapting the LUT is proposed. Many design methodologies and practical implementation issues are discussed in details. Experimental results have shown that the DPD performed robustly when it is involved in the multichannel transmitter. 2) The next generation system (5G) will unquestionably use wider bandwidth to support higher throughput, which poses stringent needs for using high-speed data converters. Herein the analog-to-digital converter (ADC) tends to be the most expensive single device in the whole transmitter/receiver systems. Therefore, conventional DPD utilizing high-speed ADC becomes unaffordable, especially for small base stations (micro, pico and femto). A digital predistortion technique utilizing spectral extrapolation is proposed in this thesis, wherein with band-limited feedback signal, the requirement on ADC speed can be significantly released. Experimental results have validated the feasibility of the proposed technique for coping with band-limited feedback signal. It has been shown that adequate linearization performance can be achieved even if the acquisition bandwidth is less than the original signal bandwidth. The experimental results obtained by using LTE-Advanced signal of 320 MHz bandwidth are quite satisfactory, and to the authors’ knowledge, this is the first high-performance wideband DPD ever been reported. 3) To address the predicament that mobile operators do not have enough contiguous usable bandwidth, carrier aggregation (CA) technique is developed and imported into 4G LTE-Advanced. This pushes the utilization of concurrent dual-band transmitter/receiver, which reduces the hardware expense by using a single front-end. Compensation techniques for the respective concurrent dual-band transmitter and receiver front-ends are proposed to combat the inter-band modulation distortion, and simultaneously reduce the distortion for the both lower-side band and upper-side band signals.電気通信大学201

Decision-Directed Channel Estimation Implementation for Spectral Efficiency Improvement in Mobile MIMO-OFDM

Channel estimation algorithms and their implementations for mobile receivers are considered in this paper. The 3GPP long term evolution (LTE) based pilot structure is used as a benchmark in a multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) receiver. The decision directed (DD) space alternating generalized expectation-maximization (SAGE) algorithm is used to improve the performance from that of the pilot symbol based least-squares (LS) channel estimator. The performance is improved with high user velocities, where the pilot symbol density is not sufficient. Minimum mean square error (MMSE) filtering is also used in estimating the channel in between pilot symbols. The pilot overhead can be reduced to a third of the LTE pilot overhead with DD channel estimation, obtaining a ten percent increase in data throughput. Complexity reduction and latency issues are considered in the architecture design. The pilot based LS, MMSE and the SAGE channel estimators are implemented with a high level synthesis tool, synthesized with the UMC 0.18 μm CMOS technology and the performance-complexity trade-offs are studied. The MMSE estimator improves the performance from the simple LS estimator with LTE pilot structure and has low power consumption. The SAGE estimator has high power consumption but can be used with reduced pilot density to increase the data rate.National Science FoundationTekesElektrobitRenesas Mobile EuropeAcademy of FinlandNokia Siemens NetworksXilin

IST-2000-30148 I-METRA: D3.2 Implementation of relevant algorithms

This deliverable provides a high level description of the software developed within the I-METRA project following the selection reported in D3.1 "Design, Analysis and Selection of Suitable Algorithms".Preprin

Information Technology

The new millennium has been labeled as the century of the personal communications revolution or more specifically, the digital wireless communications revolution. The introduction of new multimedia services has created higher loads on available radio resources. These services can be presented in different levels of quality of service. Namely, the task of the radio resource manager is to provide these levels. Radio resources are scarce and need to be shared by many users. The sharing has to be carried out in an efficient way avoiding as much as possible any waste of resources. The main contribution focus of this work is on radio resource management in opportunistic systems. In opportunistic communications dynamic rate and power allocation may be performed over the dimensions of time, frequency and space in a wireless system. In this work a number of these allocation schemes are proposed. A downlink scheduler is introduced in this work that controls the activity of the users. The scheduler is a simple integral controller that controls the activity of users, increasing or decreasing it depending on the degree of proximity to a requested quality of service level. The scheduler is designed to be a best effort scheduler; that is, in the event the requested quality of service (QoS) cannot be attained, users are always guaranteed the basic QoS level provided by a proportional fair scheduler. In a proportional fair scheduler, the user with the best rate quality factor is selected. The rate quality here is the instantaneous achievable rate divided by the average throughput Uplink scheduling is more challenging than its downlink counterpart due to signalling restrictions and additional constraints on resource allocations. For instance, in long term evolution systems, single carrier FDMA is to be utilized which requires the frequency domain resource allocation to be done in such a way that a user could only be allocated subsequent bands. We suggest for the uplink a scheduler that follows a heuristic approach in its decision. The scheduler is mainly based on the gradient algorithm that maximizes the gradient of a certain utility. The utility could be a function of any QoS. In addition, an optimal uplink scheduler for the same system is presented. This optimal scheduler is valid in theory only, nevertheless, it provides a considerable benchmark for evaluation of performance for the heuristic scheduler as well as other algorithms of the same system. A study is also made for the feedback information in a multi-carrier system. In a multi-carrier system, reporting the channel state information (CSI) of every subcarrier will result in huge overhead and consequent waste in bandwidth. In this work the subcarriers are grouped into subbands which are in turn grouped into blocks and a study is made to find the minimum amount of information for the adaptive modulation and coding (AMC) of the blocks. The thesis also deals with admission control and proposes an opportunistic admission controller. The controller gradually integrates a new user requesting admission into the system. The system is probed to examine the effect of the new user on existing connections. The user is finally fully admitted if by the end of the probing, the quality of service (QoS) of existing connections did not drop below a certain threshold. It is imperative to mention that the research work of this thesis is mainly focused on non-real time applications.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Advanced receivers for high data rate mobile communications

Improving the spectral efficiency is a key issue in the future wireless communication systems since the spectrum is a scarce resource. Both the number of users as well the demanded data rates are increasing all the time. Furthermore, in mobile communications the wireless link is required to be reliable even when the mobile is in a fast moving vehicle. Using Multiple-Input Multiple-Output (MIMO) antennas is a well known technique to provide higher spectral efficiency as well as better link reliability. Additionally, higher order modulation methods can be used to provide higher data rates. In order to benefit from these enhancements in practise, sophisticated signal processing methods as well as accurate estimates of time-varying wireless channel parameters are needed. This thesis addresses the problem of designing multi-antenna receivers in high data rate systems. The case of multiple transmit antennas is also considered. System specific features of High Speed Downlink Packet Access (HSDPA) which is part of 3rd generation (3G) Wideband Code Division Multiple Access (WCDMA) evolution are exploited in channel estimation methods and in MIMO receiver design. Additionally, complexity reduction methods for Minimum Mean Square Error (MMSE) equalization are addressed. Blind channel estimation methods are spectrally efficient, since no extra resources are needed for pilot signals. However, in mobile communications accurate estimates are needed also in fast fading channels. Consequently, semi-blind channel estimation methods where the receiver combines blind and pilot based channel estimation are an appealing alternative. In this thesis blind and semi-blind channel estimation methods based on knowledge of multiple spreading codes are derived. A novel semi-blind combining scheme for code multiplexed pilot signal and blind estimation is proposed. Another important factor in receiver design criteria is the structure of interference in the received signals. Interference mitigation techniques in MIMO systems have been shown to be potential methods for providing improved performance. A chip level inter-antenna interference cancellation method has been developed in this thesis for HSDPA. Furthermore, this multi-stage ordered interference canceler is combined with the semi-blind channel estimation scheme to enhance the system performance further.Langattomassa tiedonsiirrossa radiospektrin tehokas käyttö on tulevaisuuden suuria haasteita. Taajuuksia on käytössä vain rajoitetusti, kun taas käyttäjien määrä sekä vaaditut siirtonopeudet kasvavat jatkuvasti. Lisäksi langattomien yhteyksien on toimittava luotettavasti myös nopeasti liikkuvissa kulkuneuvoissa. Moniantennijärjestelmät, joissa on useita antenneita sekä tukiasemissa että päätelaitteissa mahdollistavat radiospektrin tehokkaamman käytön sekä parantavat yhteyksien laatua. Tiedonsiirtonopeutta voidaan myös kasvattaa erilaisilla modulaatiotekniikoilla. Hyötyjen saavutamiseksi käytännössä tarvitaan sekä kehittyneitä vastaanotinrakenteita että tarkkoja estimaatteja aikamuuttuvasta radiokanavasta. Tässä työssä on kehitetty vastaanotinrakenteita ja kanavan estimointimenetelmiä kolmannen sukupolven (3G) nopeiden datayhteyksien (HSPA) järjestelmissä. Työssä on johdettu menetelmiä, jotka hyödyntävät HSPA järjestelmien erikoispiirteitä tehokkaasti. Lisäksi on kehitetty laskennallisesti tehokkaita menetelmiä vastaanottimien signaalinkäsittelyyn. Ns. sokeat menetelmät mahdollistavat taajuuskaistan tehokkaan käytön, koska ne eivät vaadi tunnettuja harjoitussignaaleja. Mobiileissa tietolikennejärjestelmissä radiokanava saattaa kuitenkin muuttua hyvin nopeasti, jonka vuoksi kanavan estimoinnissa on tyypillisesti hyödynnetty tunnettua pilottisignaalia. Yhdistämällä pilottipohjainen ja sokea kanavaestimointimenetelmä, voidaan saavuttaa molempien menetelmien edut. Tässä työssä kehitettiin sokeita kanavaestimointimenetelmiä, jotka hyödyntävät useita tunnettuja hajoituskoodeja. Sokean ja koodijakoiseen pilottisignaaliin pohjautuvien kanavan estimaattien yhdistämiseksi kehitettiin uusi menetelmä. Signaalin laatua ja siten vastaanottimen suorituskykyä voidaan langattomissa järjestelmissä parantaa vaimentamalla interferenssiä eli häiriöitä. Vastaanottimen toimintaa voidaan tehostaa oleellisesti, jos häiriösignaalin rakenne tunnetaan. Käytettäessä useampaa lähetysantennia HSPA järjestelmissä vastaanotetussa signaalissa olevia häiriötä voidaan kumota usealla eri tasolla. Tässä työssä on kehitetty chippitasolla häiriöitä kumoava vastaanotinrakenne, joka hyödyntää HSPA järjestelmän ominaisuuksia. Vastaanottimen suorituskykyä on edelleen parannettu yhdistämällä se aiemmin esitettyyn puolisokeaan kanavan estimointimenetelmään.reviewe

Novel receiver architectures for mobile communications

Ph.DDOCTOR OF PHILOSOPH