200 research outputs found
A distributed approach to precoder selection using factor graphs for wireless communication networks
Interference Alignment via Message-Passing
We introduce an iterative solution to the problem of interference alignment
(IA) over MIMO channels based on a message-passing formulation. We propose a
parameterization of the messages that enables the computation of IA precoders
by a min-sum algorithm over continuous variable spaces -- under this
parameterization, suitable approximations of the messages can be computed in
closed-form. We show that the iterative leakage minimization algorithm of
Cadambe et al. is a special case of our message-passing algorithm, obtained for
a particular schedule. Finally, we show that the proposed algorithm compares
favorably to iterative leakage minimization in terms of convergence speed, and
discuss a distributed implementation.Comment: Submitted to the IEEE International Conference on Communications
(ICC) 201
LiDAR aided simulation pipeline for wireless communication in vehicular traffic scenarios
Abstract. Integrated Sensing and Communication (ISAC) is a modern technology under development for Sixth Generation (6G) systems. This thesis focuses on creating a simulation pipeline for dynamic vehicular traffic scenarios and a novel approach to reducing wireless communication overhead with a Light Detection and Ranging (LiDAR) based system. The simulation pipeline can be used to generate data sets for numerous problems. Additionally, the developed error model for vehicle detection algorithms can be used to identify LiDAR performance with respect to different parameters like LiDAR height, range, and laser point density. LiDAR behavior on traffic environment is provided as part of the results in this study. A periodic beam index map is developed by capturing antenna azimuth and elevation angles, which denote maximum Reference Signal Receive Power (RSRP) for a simulated receiver grid on the road and classifying areas using Support Vector Machine (SVM) algorithm to reduce the number of Synchronization Signal Blocks (SSBs) that are needed to be sent in Vehicle to Infrastructure (V2I) communication. This approach effectively reduces the wireless communication overhead in V2I communication
Técnicas de pré-codificação para sistemas multicelulares coordenados
Doutoramento em TelecomunicaçõesCoordenação Multicélula é um tópico de investigação em rápido
crescimento e uma solução promissora para controlar a interferência entre
células em sistemas celulares, melhorando a equidade do sistema e
aumentando a sua capacidade. Esta tecnologia já está em estudo no LTEAdvanced
sob o conceito de coordenação multiponto (COMP). Existem
várias abordagens sobre coordenação multicélula, dependendo da
quantidade e do tipo de informação partilhada pelas estações base, através
da rede de suporte (backhaul network), e do local onde essa informação é
processada, i.e., numa unidade de processamento central ou de uma forma
distribuída em cada estação base.
Nesta tese, são propostas técnicas de pré-codificação e alocação de
potência considerando várias estratégias: centralizada, todo o
processamento é feito na unidade de processamento central; semidistribuída,
neste caso apenas parte do processamento é executado na
unidade de processamento central, nomeadamente a potência alocada a
cada utilizador servido por cada estação base; e distribuída em que o
processamento é feito localmente em cada estação base. Os esquemas
propostos são projectados em duas fases: primeiro são propostas soluções
de pré-codificação para mitigar ou eliminar a interferência entre células,
de seguida o sistema é melhorado através do desenvolvimento de vários
esquemas de alocação de potência. São propostas três esquemas de
alocação de potência centralizada condicionada a cada estação base e com
diferentes relações entre desempenho e complexidade. São também
derivados esquemas de alocação distribuídos, assumindo que um sistema
multicelular pode ser visto como a sobreposição de vários sistemas com
uma única célula. Com base neste conceito foi definido uma taxa de erro
média virtual para cada um desses sistemas de célula única que compõem
o sistema multicelular, permitindo assim projectar esquemas de alocação
de potência completamente distribuídos.
Todos os esquemas propostos foram avaliados em cenários realistas,
bastante próximos dos considerados no LTE. Os resultados mostram que
os esquemas propostos são eficientes a remover a interferência entre
células e que o desempenho das técnicas de alocação de potência
propostas é claramente superior ao caso de não alocação de potência. O
desempenho dos sistemas completamente distribuídos é inferior aos
baseados num processamento centralizado, mas em contrapartida podem
ser usados em sistemas em que a rede de suporte não permita a troca de
grandes quantidades de informação.Multicell coordination is a promising solution for cellular wireless systems
to mitigate inter-cell interference, improving system fairness and
increasing capacity and thus is already under study in LTE-A under the
coordinated multipoint (CoMP) concept. There are several coordinated
transmission approaches depending on the amount of information shared
by the transmitters through the backhaul network and where the
processing takes place i.e. in a central processing unit or in a distributed
way on each base station.
In this thesis, we propose joint precoding and power allocation techniques
considering different strategies: Full-centralized, where all the processing
takes place at the central unit; Semi-distributed, in this case only some
process related with power allocation is done at the central unit; and Fulldistributed,
where all the processing is done locally at each base station.
The methods are designed in two phases: first the inter-cell interference is
removed by applying a set of centralized or distributed precoding vectors;
then the system is further optimized by centralized or distributed power
allocation schemes. Three centralized power allocation algorithms with
per-BS power constraint and different complexity tradeoffs are proposed.
Also distributed power allocation schemes are proposed by considering
the multicell system as superposition of single cell systems, where we
define the average virtual bit error rate (BER) of interference-free single
cell system, allowing us to compute the power allocation coefficients in a
distributed manner at each BS.
All proposed schemes are evaluated in realistic scenarios considering LTE
specifications. The numerical evaluations show that the proposed schemes
are efficient in removing inter-cell interference and improve system
performance comparing to equal power allocation. Furthermore, fulldistributed
schemes can be used when the amounts of information to be
exchanged over the backhaul is restricted, although system performance is
slightly degraded from semi-distributed and full-centralized schemes, but
the complexity is considerably lower. Besides that for high degrees of
freedom distributed schemes show similar behaviour to centralized ones
Energy Efficiency Maximization in Millimeter Wave Hybrid MIMO Systems for 5G and Beyond
At millimeter wave (mmWave) frequencies, the higher cost and power
consumption of hardware components in multiple-input multiple output (MIMO)
systems do not allow beamforming entirely at the baseband with a separate radio
frequency (RF) chain for each antenna. In such scenarios, to enable spatial
multiplexing, hybrid beamforming, which uses phase shifters to connect a fewer
number of RF chains to a large number of antennas is a cost effective and
energy-saving alternative. This paper describes our research on fully adaptive
transceivers that adapt their behaviour on a frame-by-frame basis, so that a
mmWave hybrid MIMO system always operates in the most energy efficient manner.
Exhaustive search based brute force approach is computationally intensive, so
we study fractional programming as a low-cost alternative to solve the problem
which maximizes energy efficiency. The performance results indicate that the
resulting mmWave hybrid MIMO transceiver achieves significantly improved energy
efficiency results compared to the baseline cases involving analogue-only or
digital-only signal processing solutions, and shows performance trade-offs with
the brute force approach.Comment: 2020 IEEE International Conference on Communications and Networking
(ComNet
Rate Splitting with Finite Constellations: The Benefits of Interference Exploitation vs Suppression
Rate-Splitting (RS) has been proposed recently to enhance the performance of
multi-user multiple-input multiple-output (MU-MIMO) systems. In RS, a user
message is split into a common and a private part, where the common part is
decoded by all users, while the private part is decoded only by the intended
user. In this paper, we study RS under a phase-shift keying (PSK) input
alphabet for multi-user multi-antenna system and propose a constructive
interference (CI) exploitation approach to further enhance the sum-rate
achieved by RS under PSK signaling. To that end, new analytical expressions for
the ergodic sum-rate are derived for two precoding techniques of the private
messages, namely, 1) a traditional interference suppression zero-forcing (ZF)
precoding approach, 2) a closed-form CI precoding approach. Our analysis is
presented for perfect channel state information at the transmitter (CSIT), and
is extended to imperfect CSIT knowledge. A novel power allocation strategy,
specifically suited for the finite alphabet setup, is derived and shown to lead
to superior performance for RS over conventional linear precoding not relying
on RS (NoRS). The results in this work validate the significant sum-rate gain
of RS with CI over the conventional RS with ZF and NoRS
- …