869 research outputs found
A note on the data-driven capacity of P2P networks
We consider two capacity problems in P2P networks. In the first one, the
nodes have an infinite amount of data to send and the goal is to optimally
allocate their uplink bandwidths such that the demands of every peer in terms
of receiving data rate are met. We solve this problem through a mapping from a
node-weighted graph featuring two labels per node to a max flow problem on an
edge-weighted bipartite graph. In the second problem under consideration, the
resource allocation is driven by the availability of the data resource that the
peers are interested in sharing. That is a node cannot allocate its uplink
resources unless it has data to transmit first. The problem of uplink bandwidth
allocation is then equivalent to constructing a set of directed trees in the
overlay such that the number of nodes receiving the data is maximized while the
uplink capacities of the peers are not exceeded. We show that the problem is
NP-complete, and provide a linear programming decomposition decoupling it into
a master problem and multiple slave subproblems that can be resolved in
polynomial time. We also design a heuristic algorithm in order to compute a
suboptimal solution in a reasonable time. This algorithm requires only a local
knowledge from nodes, so it should support distributed implementations.
We analyze both problems through a series of simulation experiments featuring
different network sizes and network densities. On large networks, we compare
our heuristic and its variants with a genetic algorithm and show that our
heuristic computes the better resource allocation. On smaller networks, we
contrast these performances to that of the exact algorithm and show that
resource allocation fulfilling a large part of the peer can be found, even for
hard configuration where no resources are in excess.Comment: 10 pages, technical report assisting a submissio
Design of Overlay Networks for Internet Multicast - Doctoral Dissertation, August 2002
Multicast is an efficient transmission scheme for supporting group communication in networks. Contrasted with unicast, where multiple point-to-point connections must be used to support communications among a group of users, multicast is more efficient because each data packet is replicated in the network – at the branching points leading to distinguished destinations, thus reducing the transmission load on the data sources and traffic load on the network links. To implement multicast, networks need to incorporate new routing and forwarding mechanisms in addition to the existing are not adequately supported in the current networks. The IP multicast are not adequately supported in the current networks. The IP multicast solution has serious scaling and deployment limitations, and cannot be easily extended to provide more enhanced data services. Furthermore, and perhaps most importantly, IP multicast has ignored the economic nature of the problem, lacking incentives for service providers to deploy the service in wide area networks. Overlay multicast holds promise for the realization of large scale Internet multicast services. An overlay network is a virtual topology constructed on top of the Internet infrastructure. The concept of overlay networks enables multicast to be deployed as a service network rather than a network primitive mechanism, allowing deployment over heterogeneous networks without the need of universal network support. This dissertation addresses the network design aspects of overlay networks to provide scalable multicast services in the Internet. The resources and the network cost in the context of overlay networks are different from that in conventional networks, presenting new challenges and new problems to solve. Our design goal are the maximization of network utility and improved service quality. As the overall network design problem is extremely complex, we divide the problem into three components: the efficient management of session traffic (multicast routing), the provisioning of overlay network resources (bandwidth dimensioning) and overlay topology optimization (service placement). The combined solution provides a comprehensive procedure for planning and managing an overlay multicast network. We also consider a complementary form of overlay multicast called application-level multicast (ALMI). ALMI allows end systems to directly create an overlay multicast session among themselves. This gives applications the flexibility to communicate without relying on service provides. The tradeoff is that users do not have direct control on the topology and data paths taken by the session flows and will typically get lower quality of service due to the best effort nature of the Internet environment. ALMI is therefore suitable for sessions of small size or sessions where all members are well connected to the network. Furthermore, the ALMI framework allows us to experiment with application specific components such as data reliability, in order to identify a useful set of communication semantic for enhanced data services
Multipath routing for video delivery over bandwidth-limited networks
The delivery of quality video service often requires high bandwidth with low delay or cost in network transmission. Current routing protocols such as those used in the Internet are mainly based on the single-path approach (e.g., the shortest-path routing). This approach cannot meet the end-to-end bandwidth requirement when the video is streamed over bandwidth-limited networks. In order to overcome this limitation, we propose multipath routing, where the video takes multiple paths to reach its destination(s), thereby increasing the aggregate throughput. We consider both unicast (point-to-point) and multicast scenarios. For unicast, we present an efficient multipath heuristic (of complexity O(|V|3)), which achieves high bandwidth with low delay. Given a set of path lengths, we then present and prove a simple data scheduling algorithm as implemented at the server, which achieves the theoretical minimum end-to-end delay. For a network with unit-capacity links, the algorithm, when combined with disjoint-path routing, offers an exact and efficient solution to meet a bandwidth requirement with minimum delay. For multicast, we study the construction of multiple trees for layered video to satisfy the user bandwidth requirements. We propose two efficient heuristics on how such trees can be constructed so as to minimize the cost of their aggregation subject to a delay constraint.published_or_final_versio
Performance Optimization and Dynamics Control for Large-scale Data Transfer in Wide-area Networks
Transport control plays an important role in the performance of large-scale scientific and media streaming applications involving transfer of large data sets, media streaming, online computational steering, interactive visualization, and remote instrument control. In general, these applications have two distinctive classes of transport requirements: large-scale scientific applications require high bandwidths to move bulk data across wide-area networks, while media streaming applications require stable bandwidths to ensure smooth media playback. Unfortunately, the widely deployed Transmission Control Protocol is inadequate for such tasks due to its performance limitations. The purpose of this dissertation is to conduct rigorous analytical study of the design and performance of transport solutions, and develop an integrated transport solution in a systematical way to overcome the limitations of current transport methods. One of the primary challenges is to explore and compose a set of feasible route options with multiple constraints. Another challenge essentially arises from the randomness inherent in wide-area networks, particularly the Internet. This randomness must be explicitly accounted for to achieve both goodput maximization and stabilization over the constructed routes by suitably adjusting the source rate in response to both network and host dynamics.The superior and robust performance of the proposed transport solution is extensively evaluated in a simulated environment and further verified through real-life implementations and deployments over both Internet and dedicated connections under disparate network conditions in comparison with existing transport methods
Application of overlay techniques to network monitoring
Measurement and monitoring are important for correct and efficient operation of a network, since these activities provide reliable information and accurate analysis for characterizing and troubleshooting a network’s performance. The focus of network measurement is to measure the volume and types of traffic on a particular network and to record the raw measurement results. The focus of network monitoring is to initiate measurement tasks, collect raw measurement results, and report aggregated outcomes.
Network systems are continuously evolving: besides incremental change to accommodate new devices, more drastic changes occur to accommodate new applications, such as overlay-based content delivery networks. As a consequence, a network can experience significant increases in size and significant levels of long-range, coordinated, distributed activity; furthermore, heterogeneous network technologies, services and applications coexist and interact. Reliance upon traditional, point-to-point, ad hoc measurements to manage such networks is becoming increasingly tenuous. In particular, correlated, simultaneous 1-way measurements are needed, as is the ability to access measurement information stored throughout the network of interest.
To address these new challenges, this dissertation proposes OverMon, a new paradigm for edge-to-edge network monitoring systems through the application of overlay techniques. Of particular interest, the problem of significant network overheads caused by normal overlay network techniques has been addressed by constructing overlay networks with topology awareness - the network topology information is derived from interior gateway protocol (IGP) traffic, i.e. OSPF traffic, thus eliminating all overlay maintenance network overhead.
Through a prototype that uses overlays to initiate measurement tasks and to retrieve measurement results, systematic evaluation has been conducted to demonstrate the feasibility and functionality of OverMon. The measurement results show that OverMon achieves good performance in scalability, flexibility and extensibility, which are important in addressing the new challenges arising from network system evolution. This work, therefore, contributes an innovative approach of applying overly techniques to solve realistic network monitoring problems, and provides valuable first hand experience in building and evaluating such a distributed system
Quality-of-service provisioning in high speed networks : routing perspectives
The continuous growth in both commercial and public network traffic with various quality-of-service (QoS) requirements is calling for better service than the current Internet\u27s best effort mechanism. One of the challenging issues is to select feasible paths that satisfy the different requirements of various applications. This problem is known as QoS routing. In general, two issues are related to QoS routing: state distribution and routing strategy. Routing strategy is used to find a feasible path that meets the QoS requirements. State distribution addresses the issue of exchanging the state information throughout the network, and can be further divided into two sub-problems: when to update and how to disseminate the state information.
In this dissertation, the issue of when to update link state information from the perspective of information theory is addressed. Based on the rate-distortion analysis, an efficient scheme, which outperforms the state of the art in terms of both protocol overhead and accuracy of link state information, is presented. Second, a reliable scheme is proposed so that, when a link is broken, link state information is still reachable to all network nodes as long as the network is connected. Meanwhile, the protocol overhead is low enough to be implemented in real networks. Third, QoS routing is NP-complete. Hence, tackling this problem requires heuristics. A common approach is to convert this problem into a shortest path or k-shortest path problem and solve it by using existing algorithms such as Bellman-Ford and Dijkstra algorithms. However, this approach suffers from either high computational complexity or low success ratio in finding the feasible paths. Hence, a new problem, All Hops k-shortest Path (AHKP), is introduced and investigated. Based on the solution to AHKP, an efficient self-adaptive routing algorithm is presented, which can guarantee in finding feasible paths with fairly low average computational complexity. One of its most distinguished properties is its progressive property, which is very useful in practice: it can self-adaptively minimize its computational complexity without sacrificing its performance. In addition, routing without considering the staleness of link state information may generate a significant percentage of false routing. Our proposed routing algorithm is capable of minimizing the impact of stale link state information without stochastic link state knowledge. Fourth, the computational complexities of existing s-approximation algorithms are linearly proportional to the adopted linear scaling factors. Therefore, two efficient algorithms are proposed for finding the optimal (the smallest) linear scaling factor such that the computational complexities are reduced. Finally, an efficient algorithm is proposed for finding the least hop(s) multiple additive constrained path for the purpose of saving network resources
Overlay networks monitoring
The phenomenal growth of the Internet and its entry into many aspects of daily life has led to a great dependency on its services. Multimedia and content distribution applications (e.g., video streaming, online gaming, VoIP) require Quality of Service (QoS) guarantees in terms of bandwidth, delay, loss, and jitter to maintain a certain level of performance. Moreover, E-commerce applications and retail websites are faced with increasing demand for better throughput and response time performance. The most practical way to realize such applications is through the use of overlay networks, which are logical networks that implement service and resource management functionalities at the application layer.
Overlays offer better deployability, scalability, security, and resiliency properties than network layer based implementation of
services.
Network monitoring and routing are among the most important issues in the design and operation of overlay networks. Accurate monitoring
of QoS parameters is a challenging problem due to: (i) unbounded link stress in the underlying IP network, and (ii) the conflict in measurements caused by spatial and temporal overlap among
measurement tasks. In this context, the focus of this dissertation is on the design and evaluation of efficient QoS monitoring and fault location algorithms using overlay networks.
First, the issue of monitoring accuracy provided by multiple concurrent active measurements is studied on a large-scale overlay test-bed (PlanetLab), the factors affecting the accuracy are
identified, and the measurement conflict problem is introduced. Then, the problem of conducting conflict-free measurements is formulated as a scheduling problem of real-time tasks, its
complexity is proven to be NP-hard, and efficient heuristic algorithms for the problem are proposed. Second, an algorithm for minimizing monitoring overhead while controlling the IP link stress is proposed. Finally, the use of overlay monitoring to locate IP links\u27 faults is investigated. Specifically, the problem of designing an overlay network for verifying the location of IP links\u27
faults, under cost and link stress constraints, is formulated as an integer generalized flow problem, and its complexity is proven to be
NP-hard. An optimal polynomial time algorithm for the relaxed problem (relaxed link stress constraints) is proposed.
A combination of simulation and experimental studies using real-life measurement tools and Internet topologies of major ISP networks is
conducted to evaluate the proposed algorithms. The studies show that the proposed algorithms significantly improve the accuracy and link
stress of overlay monitoring, while incurring low overheads. The evaluation of fault location algorithms show that fast and highly
accurate verification of faults can be achieved using overlay monitoring. In conclusion, the holistic view taken and the solutions
developed for network monitoring provide a comprehensive framework for the design, operation, and evolution of overlay networks
- …