100 research outputs found

    Low-delay nonuniform pseudo-QMF banks with application to speech enhancement

    Get PDF
    Journal ArticleAbstract-This paper presents a method for designing low-delay nonuniform pseudo quadrature mirror filter (QMF) banks. This method is motivated by the work of Li, Nguyen, and Tantaratana, in which the nonuniform filter bank is realized by combining an appropriate number of adjacent sub-bands of a uniform pseudo-QMF bank. In prior work, the prototype filter of the uniform pseudo-QMF bank was constrained to have linear phase and the overall delay associated with the filter bank was often unacceptably large for filter banks with a large number of sub-bands. This paper proposes a pseudo-QMF filter bank design technique that significantly reduces the delay by relaxing the linear phase constraints. An example in which an oversampled critical-band nonuniform filter bank is designed and applied to a two-state modeling speech enhancement system is presented in this paper. Comparison of the performance of this system to competing methods employing tree-structured, linear phase multiresolution analysis indicates that the approach described in this paper strikes a good balance between system performance and low delay

    Design of low-delay nonuniform pseudo QMF banks

    Get PDF
    Journal ArticleABSTRACT This paper presents a method for designing low-delay nonuniform pseudo QMF banks. The method is motivated by the work of Li, Nguyen and Tantaratana, in which the nonuniform filter bank is realized by combining an appropriate number of adjacent subbands of a uniform pseudo QMF filter bank. In prior work, the prototype filter of the uniform pseudo QMF is constrained to have linear phase and the overall delay associated with the filter bank was often unacceptably large for filter banks with a large number of subbands. By relaxing the linear phase constraints, this paper proposes a pseudo QMF filter bank design technique that significantly reduces the delay. An example that experimentally verifies the capabilities of the design technique is presented

    Fractional biorthogonal partners in channel equalization and signal interpolation

    Get PDF
    The concept of biorthogonal partners has been introduced recently by the authors. The work presented here is an extension of some of these results to the case where the upsampling and downsampling ratios are not integers but rational numbers, hence, the name fractional biorthogonal partners. The conditions for the existence of stable and of finite impulse response (FIR) fractional biorthogonal partners are derived. It is also shown that the FIR solutions (when they exist) are not unique. This property is further explored in one of the applications of fractional biorthogonal partners, namely, the fractionally spaced equalization in digital communications. The goal is to construct zero-forcing equalizers (ZFEs) that also combat the channel noise. The performance of these equalizers is assessed through computer simulations. Another application considered is the all-FIR interpolation technique with the minimum amount of oversampling required in the input signal. We also consider the extension of the least squares approximation problem to the setting of fractional biorthogonal partners

    Generic Feasibility of Perfect Reconstruction with Short FIR Filters in Multi-channel Systems

    Full text link
    We study the feasibility of short finite impulse response (FIR) synthesis for perfect reconstruction (PR) in generic FIR filter banks. Among all PR synthesis banks, we focus on the one with the minimum filter length. For filter banks with oversampling factors of at least two, we provide prescriptions for the shortest filter length of the synthesis bank that would guarantee PR almost surely. The prescribed length is as short or shorter than the analysis filters and has an approximate inverse relationship with the oversampling factor. Our results are in form of necessary and sufficient statements that hold generically, hence only fail for elaborately-designed nongeneric examples. We provide extensive numerical verification of the theoretical results and demonstrate that the gap between the derived filter length prescriptions and the true minimum is small. The results have potential applications in synthesis FB design problems, where the analysis bank is given, and for analysis of fundamental limitations in blind signals reconstruction from data collected by unknown subsampled multi-channel systems.Comment: Manuscript submitted to IEEE Transactions on Signal Processin

    Oversampling PCM techniques and optimum noise shapers for quantizing a class of nonbandlimited signals

    Get PDF
    We consider the efficient quantization of a class of nonbandlimited signals, namely, the class of discrete-time signals that can be recovered from their decimated version. The signals are modeled as the output of a single FIR interpolation filter (single band model) or, more generally, as the sum of the outputs of L FIR interpolation filters (multiband model). These nonbandlimited signals are oversampled, and it is therefore reasonable to expect that we can reap the same benefits of well-known efficient A/D techniques that apply only to bandlimited signals. We first show that we can obtain a great reduction in the quantization noise variance due to the oversampled nature of the signals. We can achieve a substantial decrease in bit rate by appropriately decimating the signals and then quantizing them. To further increase the effective quantizer resolution, noise shaping is introduced by optimizing prefilters and postfilters around the quantizer. We start with a scalar time-invariant quantizer and study two important cases of linear time invariant (LTI) filters, namely, the case where the postfilter is the inverse of the prefilter and the more general case where the postfilter is independent from the prefilter. Closed form expressions for the optimum filters and average minimum mean square error are derived in each case for both the single band and multiband models. The class of noise shaping filters and quantizers is then enlarged to include linear periodically time varying (LPTV)M filters and periodically time-varying quantizers of period M. We study two special cases in great detail

    Design of nonuniform near allpass complementary FIR filters via a semi-infinite programming technique

    Get PDF
    In this paper, we consider the problem of designing a set of nonuniform near allpass complementary FIR filters. This problem can be formulated as a quadratic semi-infinite programming problem, where the objective is to minimize the sum of the ripple energy for the individual filters, subject to the passband and stopband specifications as well as to the allpass complementary specification. The dual parameterization method is used for solving the linear quadratic semi-infinite programming problem

    Classical sampling theorems in the context of multirate and polyphase digital filter bank structures

    Get PDF
    The recovery of a signal from so-called generalized samples is a problem of designing appropriate linear filters called reconstruction (or synthesis) filters. This relationship is reviewed and explored. Novel theorems for the subsampling of sequences are derived by direct use of the digital-filter-bank framework. These results are related to the theory of perfect reconstruction in maximally decimated digital-filter-bank systems. One of the theorems pertains to the subsampling of a sequence and its first few differences and its subsequent stable reconstruction at finite cost with no error. The reconstruction filters turn out to be multiplierless and of the FIR (finite impulse response) type. These ideas are extended to the case of two-dimensional signals by use of a Kronecker formalism. The subsampling of bandlimited sequences is also considered. A sequence x(n ) with a Fourier transform vanishes for |ω|&ges;Lπ/M, where L and M are integers with L<M, can in principle be represented by reducing the data rate by the amount M/L. The digital polyphase framework is used as a convenient tool for the derivation as well as mechanization of the sampling theorem

    A versatile iterative framework for the reconstruction of bandlimited signals from their nonuniform samples

    Get PDF
    In this paper, we study a versatile iterative framework for the reconstruction of uniform samples from nonuniform samples of bandlimited signals. Assuming the input signal is slightly oversampled, we first show that its uniform and nonuniform samples in the frequency band of interest can be expressed as a system of linear equations using fractional delay digital filters. Then we develop an iterative framework, which enables the development and convergence analysis of efficient iterative reconstruction algorithms. In particular, we study the Richardson iteration in detail to illustrate how the reconstruction problem can be solved iteratively, and show that the iterative method can be efficiently implemented using Farrow-based variable digital filters with few general-purpose multipliers. Under the proposed framework, we also present a completed and systematic convergence analysis to determine the convergence conditions. Simulation results show that the iterative method converges more rapidly and closer to the true solution (i.e. the uniform samples) than conventional iterative methods using truncation of sinc series. © 2010 The Author(s).published_or_final_versionSpringer Open Choice, 21 Feb 201
    corecore