Flow organization and heat transfer in turbulent wall sheared thermal convection

We perform direct numerical simulations of wall sheared Rayleigh-B\'enard (RB) convection for Rayleigh numbers up to $Ra=10^8$, Prandtl number unity, and wall shear Reynolds numbers up to $Re_w=10000$. Using the Monin-Obukhov length $L_{MO}$ we identify three different flow states, a buoyancy dominated regime ($L_{MO} \lesssim \lambda_{\theta}$; with $\lambda_{\theta}$ the thermal boundary layer thickness), a transitional regime ($0.5H \gtrsim L_{MO} \gtrsim \lambda_{\theta}$; with $H$ the height of the domain), and a shear dominated regime ($L_{MO} \gtrsim 0.5H$). In the buoyancy dominated regime the flow dynamics are similar to that of turbulent thermal convection. The transitional regime is characterized by rolls that are increasingly elongated with increasing shear. The flow in the shear dominated regime consists of very large-scale meandering rolls, similar to the ones found in conventional Couette flow. As a consequence of these different flow regimes, for fixed $Ra$ and with increasing shear, the heat transfer first decreases, due to the breakup of the thermal rolls, and then increases at the beginning of the shear dominated regime. For $L_{MO} \gtrsim 0.5H$ the Nusselt number $Nu$ effectively scales as $Nu \sim Ra^{\alpha}$, with $\alpha \ll 1/3$ while we find $\alpha \simeq 0.31$ in the buoyancy dominated regime. In the transitional regime the effective scaling exponent is $\alpha > 1/3$, but the temperature and velocity profiles in this regime are not logarithmic yet, thus indicating transient dynamics and not the ultimate regime of thermal convection

[Activity of Institute for Computer Applications in Science and Engineering]

This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, fluid mechanics, and computer science

HPCCP/CAS Workshop Proceedings 1998

This publication is a collection of extended abstracts of presentations given at the HPCCP/CAS (High Performance Computing and Communications Program/Computational Aerosciences Project) Workshop held on August 24-26, 1998, at NASA Ames Research Center, Moffett Field, California. The objective of the Workshop was to bring together the aerospace high performance computing community, consisting of airframe and propulsion companies, independent software vendors, university researchers, and government scientists and engineers. The Workshop was sponsored by the HPCCP Office at NASA Ames Research Center. The Workshop consisted of over 40 presentations, including an overview of NASA's High Performance Computing and Communications Program and the Computational Aerosciences Project; ten sessions of papers representative of the high performance computing research conducted within the Program by the aerospace industry, academia, NASA, and other government laboratories; two panel sessions; and a special presentation by Mr. James Bailey

Characterization of multiphase flows integrating X-ray imaging and virtual reality

Multiphase flows are used in a wide variety of industries, from energy production to pharmaceutical manufacturing. However, because of the complexity of the flows and difficulty measuring them, it is challenging to characterize the phenomena inside a multiphase flow. To help overcome this challenge, researchers have used numerous types of noninvasive measurement techniques to record the phenomena that occur inside the flow. One technique that has shown much success is X-ray imaging. While capable of high spatial resolutions, X-ray imaging generally has poor temporal resolution. This research improves the characterization of multiphase flows in three ways. First, an X-ray image intensifier is modified to use a high-speed camera to push the temporal limits of what is possible with current tube source X-ray imaging technology. Using this system, sample flows were imaged at 1000 frames per second without a reduction in spatial resolution. Next, the sensitivity of X-ray computed tomography (CT) measurements to changes in acquisition parameters is analyzed. While in theory CT measurements should be stable over a range of acquisition parameters, previous research has indicated otherwise. The analysis of this sensitivity shows that, while raw CT values are strongly affected by changes to acquisition parameters, if proper calibration techniques are used, acquisition parameters do not significantly influence the results for multiphase flow imaging. Finally, two algorithms are analyzed for their suitability to reconstruct an approximate tomographic slice from only two X-ray projections. These algorithms increase the spatial error in the measurement, as compared to traditional CT; however, they allow for very high temporal resolutions for 3D imaging. The only limit on the speed of this measurement technique is the image intensifier-camera setup, which was shown to be capable of imaging at a rate of at least 1000 FPS. While advances in measurement techniques for multiphase flows are one part of improving multiphase flow characterization, the challenge extends beyond measurement techniques. For improved measurement techniques to be useful, the data must be accessible to scientists in a way that maximizes the comprehension of the phenomena. To this end, this work also presents a system for using the Microsoft Kinect sensor to provide natural, non-contact interaction with multiphase flow data. Furthermore, this system is constructed so that it is trivial to add natural, non-contact interaction to immersive visualization applications. Therefore, multiple visualization applications can be built that are optimized to specific types of data, but all leverage the same natural interaction. Finally, the research is concluded by proposing a system that integrates the improved X-ray measurements, with the Kinect interaction system, and a CAVE automatic virtual environment (CAVE) to present scientists with the multiphase flow measurements in an intuitive and inherently three-dimensional manner

ICASE

This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in the areas of (1) applied and numerical mathematics, including numerical analysis and algorithm development; (2) theoretical and computational research in fluid mechanics in selected areas of interest, including acoustics and combustion; (3) experimental research in transition and turbulence and aerodynamics involving Langley facilities and scientists; and (4) computer science

Annual Research Briefs, 1990

The 1990 annual progress reports of the Research Fellows and students of the Center for Turbulent Research (CTR) are included. It is intended primarily as a contractor report to NASA, Ames Research Center. In addition, numerous CTR Manuscript Reports were published last year. The purpose of the CTR Manuscript Series is to expedite the dissemination of research results by the CTR staff. The CTR is devoted to the fundamental study of turbulent flow; its objectives are to produce advances in physical understanding of turbulence, in turbulence modeling and simulation, and in turbulence control

Development of novel synthetic and systems biology tools for investigating and obviating the effect of atherogenic blood flow on vascular cells

The high mortality from cardiovascular diseases is caused by atherosclerosis. Atherosclerosis develops due to multiple factors, including biomechanical factors, such as shear stress generated by the flow of blood on the inner lining of blood vessels. In order to tackle this serious life-threatening condition, we aimed to develop synthetic and systems biology tools for studying the effect of atherogenic shear stress regimes on vascular cells. Our tools could potentially also lead to the identification of drug targets and of drug candidates against cardiovascular disease. The first tool that we developed is a network of genes consisting of a shear stress sensor module, a reporter module and a linker module which signals from the sensor to the reporter module. This circuit is capable of processing the shear stress or ligand activation signal into a fluorescent readout, allowing screening for drug candidate compounds that modify the activity of the shear stress sensor. Instead of the reporter module, the gene network could be coupled to therapeutic genes in order to express these genes under atherogenic shear stress conditions. Our second developed tool is a flow chamber which facilitates exposure of vascular cells to linearly increasing shear stress along the length of the channel floor for in vitro cellular biomechanical studies. This device outperforms currently available linear shear stress inducing devices in terms of the magnitude of shear stress range, linearity of shear stress along the channel length, and the large sampling area granted by the uniformity of shear stress across the channel width. The third tool that we developed is an electroporation and flow device capable of inserting genetic material into primary vascular cells in their adherent state, exposing these cells to fluid flow. This device allows investigations into cardiovascular mechanotransduction pathways under relevant physiological flow conditions.Open Acces