2,922 research outputs found
A Bio-Inspired Tensegrity Manipulator with Multi-DOF, Structurally Compliant Joints
Most traditional robotic mechanisms feature inelastic joints that are unable
to robustly handle large deformations and off-axis moments. As a result, the
applied loads are transferred rigidly throughout the entire structure. The
disadvantage of this approach is that the exerted leverage is magnified at each
subsequent joint possibly damaging the mechanism. In this paper, we present two
lightweight, elastic, bio-inspired tensegrity robotics arms which mitigate this
danger while improving their mechanism's functionality. Our solutions feature
modular tensegrity structures that function similarly to the human elbow and
the human shoulder when connected. Like their biological counterparts, the
proposed robotic joints are flexible and comply with unanticipated forces. Both
proposed structures have multiple passive degrees of freedom and four active
degrees of freedom (two from the shoulder and two from the elbow). The
structural advantages demonstrated by the joints in these manipulators
illustrate a solution to the fundamental issue of elegantly handling off-axis
compliance.Comment: IROS 201
Surgical Applications of Compliant Mechanisms:A Review
Current surgical devices are mostly rigid and are made of stiff materials, even though their predominant use is on soft and wet tissues. With the emergence of compliant mechanisms (CMs), surgical tools can be designed to be flexible and made using soft materials. CMs offer many advantages such as monolithic fabrication, high precision, no wear, no friction, and no need for lubrication. It is therefore beneficial to consolidate the developments in this field and point to challenges ahead. With this objective, in this article, we review the application of CMs to surgical interventions. The scope of the review covers five aspects that are important in the development of surgical devices: (i) conceptual design and synthesis, (ii) analysis, (iii) materials, (iv) maim facturing, and (v) actuation. Furthermore, the surgical applications of CMs are assessed by classification into five major groups, namely, (i) grasping and cutting, (ii) reachability and steerability, (iii) transmission, (iv) sensing, and (v) implants and deployable devices. The scope and prospects of surgical devices using CMs are also discussed
Autonomous Soft Robotic Fish Capable of Escape Maneuvers Using Fluidic Elastomer Actuators
In this work we describe an autonomous soft-bodied robot that is both self-contained and capable of rapid, continuum-body motion. We detail the design, modeling, fabrication, and control of the soft fish, focusing on enabling the robot to perform rapid escape responses. The robot employs a compliant body with embedded actuators emulating the slender anatomical form of a fish. In addition, the robot has a novel fluidic actuation system that drives body motion and has all the subsystems of a traditional robot onboard: power, actuation, processing, and control. At the core of the fish's soft body is an array of fluidic elastomer actuators. We design the fish to emulate escape responses in addition to forward swimming because such maneuvers require rapid body accelerations and continuum-body motion. These maneuvers showcase the performance capabilities of this self-contained robot. The kinematics and controllability of the robot during simulated escape response maneuvers are analyzed and compared with studies on biological fish. We show that during escape responses, the soft-bodied robot has similar input–output relationships to those observed in biological fish. The major implication of this work is that we show soft robots can be both self-contained and capable of rapid body motion.National Science Foundation (U.S.) (NSF IIS1226883)National Science Foundation (U.S.) (NSF CCF1138967)National Science Foundation (U.S.) (1122374
Coupling Disturbance Compensated MIMO Control of Parallel Ankle Rehabilitation Robot Actuated by Pneumatic Muscles
To solve the poor compliance and safety problems in current rehabilitation robots, a novel two-degrees-offreedom (2-DOF) soft ankle rehabilitation robot driven by pneumatic muscles (PMs) is presented, taking advantages of the PM’s inherent compliance and the parallel structure’s high stiffness and payload capacity. However, the PM’s nonlinear, time-varying and hysteresis characteristics, and the coupling interference from parallel structure, as well as the unpredicted disturbance caused by arbitrary human behavior all raise difficulties in achieving high-precision control of the robot. In this paper, a multi-input-multi-output disturbance compensated sliding mode controller (MIMO-DCSMC) is proposed to tackle these problems. The proposed control method can tackle the un-modeled uncertainties and the coupling interference existed in multiple PMs’ synchronous movement, even with the subject’s participation. Experiment results on a healthy subject confirmed that the PMs-actuated ankle rehabilitation robot controlled by the proposed MIMO-DCSMC is able to assist patients to perform high-accuracy rehabilitation tasks by tracking the desired trajectory in a compliant manner
Anthropomorphic Twisted String-Actuated Soft Robotic Gripper with Tendon-Based Stiffening
Realizing high-performance soft robotic grippers is challenging because of
the inherent limitations of the soft actuators and artificial muscles that
drive them, including low force output, small actuation range, and poor
compactness. Despite advances in this area, realizing compact soft grippers
with high dexterity and force output is still challenging. This paper explores
twisted string actuators (TSAs) to drive a soft robotic gripper. TSAs have been
used in numerous robotic applications, but their inclusion in soft robots has
been limited. The proposed design of the gripper was inspired by the human
hand. Tunable stiffness was implemented in the fingers with antagonistic TSAs.
The fingers' bending angles, actuation speed, blocked force output, and
stiffness tuning were experimentally characterized. The gripper achieved a
score of 6 on the Kapandji test and recreated 31 of the 33 grasps of the Feix
GRASP taxonomy. It exhibited a maximum grasping force of 72 N, which was almost
13 times its own weight. A comparison study revealed that the proposed gripper
exhibited equivalent or superior performance compared to other similar soft
grippers.Comment: 19 pages, 15 figure
Enabling technologies for precise aerial manufacturing with unmanned aerial vehicles
The construction industry is currently experiencing a revolution with automation techniques
such as additive manufacturing and robot-enabled construction. Additive Manufacturing (AM)
is a key technology that can o er productivity improvement in the construction industry by
means of o -site prefabrication and on-site construction with automated systems. The key
bene t is that building elements can be fabricated with less materials and higher design freedom
compared to traditional manual methods.
O -site prefabrication with AM has been investigated for some time already, but it has limitations
in terms of logistical issues of components transportation and due to its lack of design
exibility on-site. On-site construction with automated systems, such as static gantry systems
and mobile ground robots performing AM tasks, can o er additional bene ts over o -site
prefabrication, but it needs further research before it will become practical and economical.
Ground-based automated construction systems also have the limitation that they cannot extend
the construction envelope beyond their physical size. The solution of using aerial robots
to liberate the process from the constrained construction envelope has been suggested, albeit
with technological challenges including precision of operation, uncertainty in environmental
interaction and energy e ciency.
This thesis investigates methods of precise manufacturing with aerial robots. In particular,
this work focuses on stabilisation mechanisms and origami-based structural elements that allow
aerial robots to operate in challenging environments. An integrated aerial self-aligning delta
manipulator has been utilised to increase the positioning accuracy of the aerial robots, and
a Material Extrusion (ME) process has been developed for Aerial Additive Manufacturing
(AAM). A 28-layer tower has been additively manufactured by aerial robots to demonstrate the
feasibility of AAM. Rotorigami and a bioinspired landing mechanism demonstrate their abilities
to overcome uncertainty in environmental interaction with impact protection capabilities and
improved robustness for UAV. Design principles using tensile anchoring methods have been
explored, enabling low-power operation and explores possibility of low-power aerial stabilisation.
The results demonstrate that precise aerial manufacturing needs to consider not only just the
robotic aspects, such as
ight control algorithms and mechatronics, but also material behaviour
and environmental interaction as factors for its success.Open Acces
- …