A Wireless LC Sensor Coated with Ba0.9Bi0.066TiO3 for Measuring Temperature

This paper presents a passive LC wireless sensor for measuring temperature. The sensor is designed as a parallel connection of a spiral inductor and an interdigitated capacitor and it was fabricated in a conductive layer using LTCC (Low Temperature Co-fired Ceramic) technology. The inderdigitated capacitor electrodes were coated with a thin film of bismuth doped barium titanate (Ba0.9Bi0.066TiO3), whose permittivity changes with temperature, which directly induces changes in the capacitance of the interdigitated capacitor and consequently changes the resonant frequency of the sensor. The measurements of S-parameter of the sensor were performed using a Vector Network Analyzer (E5071B, Agilent Technologies, Santa Clara, CA, USA), whose port was connected to the antenna coil that was placed around the sensor in order to be able to wirelessly detect temperature, in the temperature range from 25 degrees C to 165 degrees C

Design, optimization and characterization of LC sensors for wireless measurement of moisture concentration in building materials

Pasivni bežični LC senzori projektovani su u tehnologiji štampanih kola (PCB) i u tehnologiji nisko-temperaturno pečene keramike (LTCC). Predstavljena su tri tipa LC senzora izrađenih na PCB-u u jednoslojnoj i dvoslojnoj štampi. Takođe su prikazana i dva tipa LC senzora izrađenih u LTCC tehnologiji. Karakterizacija senzora je izvršena u laboratorijskim uslovima a za testiranje korišćeni su građevinska opeka i siporeks blok kao jedni od najčešće korišćenih materijala u građevinskoj industriji za zidane objekte.Passive LC wireless sensors are designed in technology printed circuit boards (PCB) and the technology of Low Temperature Co-Fired Ceramics (LTCC). Presented are three types of LC sensors made on the PCB in the monolayer and bilayer press. It also presents two types of LC sensors manufactured in LTCC technology. Characterization of the sensor is carried out in the laboratory for testing were used building bricks and aerated concrete block as one of the most commonly used materials in the construction industry

Design, optimization and characterization of LC sensors for wireless measurement of moisture concentration in building materials

Pasivni bežični LC senzori projektovani su u tehnologiji štampanih kola (PCB) i u tehnologiji nisko-temperaturno pečene keramike (LTCC). Predstavljena su tri tipa LC senzora izrađenih na PCB-u u jednoslojnoj i dvoslojnoj štampi. Takođe su prikazana i dva tipa LC senzora izrađenih u LTCC tehnologiji. Karakterizacija senzora je izvršena u laboratorijskim uslovima a za testiranje korišćeni su građevinska opeka i siporeks blok kao jedni od najčešće korišćenih materijala u građevinskoj industriji za zidane objekte.Passive LC wireless sensors are designed in technology printed circuit boards (PCB) and the technology of Low Temperature Co-Fired Ceramics (LTCC). Presented are three types of LC sensors made on the PCB in the monolayer and bilayer press. It also presents two types of LC sensors manufactured in LTCC technology. Characterization of the sensor is carried out in the laboratory for testing were used building bricks and aerated concrete block as one of the most commonly used materials in the construction industry