A multiple scales approach to evaporation induced Marangoni convection

This paper considers the stability of thin liquid layers of binary mixtures of a volatile (solvent) species and a non-volatile (polymer) species. Evaporation leads to a depletion of the solvent near the liquid surface. If surface tension increases for lower solvent concentrations, sufficiently strong compositional gradients can lead to Bénard-Marangoni-type convection that is similar to the kind which is observed in films that are heated from below. The onset of the instability is investigated by a linear stability analysis. Due to evaporation, the base state is time dependent, thus leading to a non-autonomous linearised system, which impedes the use of normal modes. However, the time scale for the solvent loss due to evaporation is typically long compared to the diffusive time scale, so a systematic multiple scales expansion can be sought for a finite dimensional approximation of the linearised problem. This is determined to leading and to next order. The corrections indicate that sufficient separation of the top eigenvalue from the remaining spectrum is required for the validity of the expansions, but not the magnitude of the eigenvalues themselves. The approximations are applied to analyse experiments by Bassou and Rharbi with polystyrene/toluene mixtures [Langmuir 2009 (25) 624–632]

Evaporation-triggered microdroplet nucleation and the four life phases of an evaporating Ouzo drop

Evaporating liquid droplets are omnipresent in nature and technology, such as in inkjet printing, coating, deposition of materials, medical diagnostics, agriculture, food industry, cosmetics, or spills of liquids. While the evaporation of pure liquids, liquids with dispersed particles, or even liquid mixtures has intensively been studied over the last two decades, the evaporation of ternary mixtures of liquids with different volatilities and mutual solubilities has not yet been explored. Here we show that the evaporation of such ternary mixtures can trigger a phase transition and the nucleation of microdroplets of one of the components of the mixture. As model system we pick a sessile Ouzo droplet (as known from daily life - a transparent mixture of water, ethanol, and anise oil) and reveal and theoretically explain its four life phases: In phase I, the spherical cap-shaped droplet remains transparent, while the more volatile ethanol is evaporating, preferentially at the rim of the drop due to the singularity there. This leads to a local ethanol concentration reduction and correspondingly to oil droplet nucleation there. This is the beginning of phase II, in which oil microdroplets quickly nucleate in the whole drop, leading to its milky color which typifies the so-called 'Ouzo-effect'. Once all ethanol has evaporated, the drop, which now has a characteristic non-spherical-cap shape, has become clear again, with a water drop sitting on an oil-ring (phase III), finalizing the phase inversion. Finally, in phase IV, also all water has evaporated, leaving behind a tiny spherical cap-shaped oil drop.Comment: 40 pages, 12 figure

Dynamical density functional theory for the evaporation of droplets of nanoparticle suspension

We develop a lattice gas model for the drying of droplets of a nanoparticle suspension on a planar surface, using dynamical density functional theory (DDFT) to describe the time evolution of the solvent and nanoparticle density profiles. The DDFT assumes a diffusive dynamics but does not include the advective hydrodynamics of the solvent, so the model is relevant to highly viscous or near to equilibrium systems. Nonetheless, we see an equivalent of the coffee-ring stain effect, but in the present model it occurs for thermodynamic rather the fluid-mechanical reasons. The model incorporates the effect of phase separation and vertical density variations within the droplet and the consequence of these on the nanoparticle deposition pattern on the surface. We show how to include the effect of slip or no-slip at the surface and how this is related to the receding contact angle. We also determine how the equilibrium contact angle depends on the microscopic interaction parameters.Comment: 35 pages, 10 figure

Modelling of dynamical effects related to the wettability and capillarity of simple and complex liquids

This Thesis explores physical phenomena characteristic for thin liquid films and small droplets of simple and complex liquids on solid substrates for which wettability and capillarity control their statical and dynamical properties. We start by discussing the general concepts of wettability and capillarity and introduce the common mathematical framework of the lubrication approximation for studies of thin liquid films and small contact angle drops. We demonstrate the derivation of the generic equation describing the evolution of a film of simple liquid from the Navier-Stokes equations. We show how this model can be further extended to incorporate various effects relevant to the case of complex liquids. The results described in the Thesis comprise three projects with the common main theme of the influence of wettability and capillarity on the statics and dynamics of the studied systems, namely (i) Evaporating sessile droplets fed through the solid substrate - a geometry that allows us to discuss steady states of the system and their role in the time evolution of freely evaporating droplets without influx in an isothermal case; (ii) The influence of a solute--dependent wettability on the stability, static and dynamical properties of thin films and drops of non-volatile mixtures, suspensions and solutions; (iii) A parameter-passing scheme between particle-based Molecular Dynamics simulations and the continuum lubrication model which allows us to discuss equilibrium properties of small polymeric droplets. We present the physical questions arising in the three systems and discuss approaches and results as well as possible extensions

Dynamical model for the formation of patterned deposits at receding contact lines

We describe the formation of deposition patterns that are observed in many different experiments where a three-phase contact line of a volatile nanoparticle suspension or polymer solution recedes. A dynamical model based on a long-wave approximation predicts the deposition of irregular and regular line patterns due to self-organised pinning-depinning cycles corresponding to a stick-slip motion of the contact line. We analyze how the line pattern properties depend on the evaporation rate and solute concentration

Perfluoro (Imidoylamidine) diamidines

Perfluoroether triazine elastomers having improved properties are prepared from oligomeric imidoylamidines that were in turn, prepared by the process of: (1) reacting a perfluorodinitrile with liquid ammonia to yield a perfluorodiamidine, (2) isolating the perfluorodiamidine, (3) reacting the isolated diamidine with a perfluorodinitrile to yield a perfluoro(imidoylamidine) dinitrile, and then repeating the steps to sequentially grow an oligomer of desired molecular size. The isolated amidine and nitrile intermediates are also disclosed. The elastomers can be fashioned into seals, gaskets, and sealing components and the like

Ink Drying in Inkjet Printers

The first problem put to the Study Group for Maths in Industry by Domino UK Ltd concerns ink drying and blocking nozzles in a printer. The goals were as follows: 1. To propose mechanisms for the growth of a plug of dried ink in the open end of a Drop-on-Demand drop generator, 2. To suggest cures to this problem, 3. To consider why oscillating the meniscus appears to alleviate the problem