Improving Consistency of UML Diagrams and Its Implementation Using Reverse Engineering Approach

Software development deals with various changes and evolution that cannot be avoided due to the development processes which are vastly incremental and iterative. In Model Driven Engineering, inconsistency between model and its implementation has huge impact on the software development process in terms of added cost, time and effort. The later the inconsistencies are found, it could add more cost to the software project. Thus, this paper aims to describe the development of a tool that could improve the consistency between Unified Modeling Language (UML) design models and its C# implementation using reverse engineering approach. A list of consistency rules is defined to check vertical and horizontal consistencies between structural (class diagram) and behavioral (use case diagram and sequence diagram) UML diagrams against the implemented C# source code. The inconsistencies found between UML diagrams and source code are presented in a textual description and visualized in a tree view structure

Designing Round-Trip Systems by Change Propagation and Model Partitioning

Software development processes incorporate a variety of different artifacts (e.g., source code, models, and documentation). For multiple reasons the data that is contained in these artifacts does expose some degree of redundancy. Ensuring global consistency across artifacts during all stages in the development of software systems is required, because inconsistent artifacts can yield to failures. Ensuring consistency can be either achieved by reducing the amount of redundancy or by synchronizing the information that is shared across multiple artifacts. The discipline of software engineering that addresses these problems is called Round-Trip Engineering (RTE). In this thesis we present a conceptual framework for the design RTE systems. This framework delivers precise definitions for essential terms in the context of RTE and a process that can be used to address new RTE applications. The main idea of the framework is to partition models into parts that require synchronization - skeletons - and parts that do not - clothings. Once such a partitioning is obtained, the relations between the elements of the skeletons determine whether a deterministic RTE system can be built. If not, manual decisions may be required by developers. Based on this conceptual framework, two concrete approaches to RTE are presented. The first one - Backpropagation-based RTE - employs change translation, traceability and synchronization fitness functions to allow for synchronization of artifacts that are connected by non-injective transformations. The second approach - Role-based Tool Integration - provides means to avoid redundancy. To do so, a novel tool design method that relies on role modeling is presented. Tool integration is then performed by the creation of role bindings between role models. In addition to the two concrete approaches to RTE, which form the main contributions of the thesis, we investigate the creation of bridges between technical spaces. We consider these bridges as an essential prerequisite for performing logical synchronization between artifacts. Also, the feasibility of semantic web technologies is a subject of the thesis, because the specification of synchronization rules was identified as a blocking factor during our problem analysis. The thesis is complemented by an evaluation of all presented RTE approaches in different scenarios. Based on this evaluation, the strengths and weaknesses of the approaches are identified. Also, the practical feasibility of our approaches is confirmed w.r.t. the presented RTE applications

Centre for Information Science Research Annual Report, 1987-1991

Annual reports from various departments of the AN

Bridging formal models : an engineering perspective

The thesis presents different techniques that can be used to build formal behavioral models. If modal properties are formulated, the models can be subjected to verification techniques to determine whether a model possesses the desired properties. However many native environments do not facilitate tools or techniques to verify them. Hence, these models need to be transformed into other models that provide suitable techniques for a formal analysis. The transformations are classified into two engineering approaches, namely syntactically engineered models and semantically engineered models. Syntactically engineered models are constructed from input specifications without explicitly considering the semantics. Semantically engineered models are constructed from input specifications by explicitly considering the semantics. The syntactic engineering approach presents four dedicated modeling techniques that construct or disseminate verification results for formal models. The first modeling technique describes a way to create models from system descriptions that specify concurrent behavior. Here, we model three variations of a 2×2 switch, for which the models are subsequently compared to models created in the specification languages: TLA+, Bluespec, Statecharts, and ACP. The comparison validates that mCRL2 is a suitable specification language to model descriptions or specify the behavior for prototype systems. The second syntactic technique constructs an mCRL2 model from a software implementation that operates a printer for printing Printed Circuit Boards. The model is used to advise (other) software engineers on dangerous language constructs in the control software. Hence, the model is model checked for various safety properties. The implementation is modeled through an over-approximation on the behavior by abstracting from program variables, such that only interface calls between processes and non-deterministic choices in procedures remain. The third modeling technique describes a language transformation from the language Chi 2.0 language to the mCRL2 language. The purpose of the transformation is to facilitate model checking techniques to the discrete part of the Chi 2.0 language

Pattern Recognition of Power System Voltage Stability using Statistical and Algorithmic Methods

In recent years, power demands around the world and particularly in North America increased rapidly due to increase in customer’s demand, while the development in transmission system is rather slow. This stresses the present transmission system and voltage stability becomes an important issue in this regard. Pattern recognition in conjunction with voltage stability analysis could be an effective tool to solve this problem In this thesis, a methodology to detect the voltage stability ahead of time is presented. Dynamic simulation software PSS/E is used to simulate voltage stable and unstable cases, these cases are used to train and test the pattern recognition algorithms. Statistical and algorithmic pattern recognition methods are used. The proposed method is tested on IEEE 39 bus system. Finally, the pattern recognition models to predict the voltage stability of the system are developed

Pattern Recognition of Power System Voltage Stability using Statistical and Algorithmic Methods

In recent years, power demands around the world and particularly in North America increased rapidly due to increase in customer’s demand, while the development in transmission system is rather slow. This stresses the present transmission system and voltage stability becomes an important issue in this regard. Pattern recognition in conjunction with voltage stability analysis could be an effective tool to solve this problem In this thesis, a methodology to detect the voltage stability ahead of time is presented. Dynamic simulation software PSS/E is used to simulate voltage stable and unstable cases, these cases are used to train and test the pattern recognition algorithms. Statistical and algorithmic pattern recognition methods are used. The proposed method is tested on IEEE 39 bus system. Finally, the pattern recognition models to predict the voltage stability of the system are developed

1st doctoral symposium of the international conference on software language engineering (SLE) : collected research abstracts, October 11, 2010, Eindhoven, The Netherlands

The first Doctoral Symposium to be organised by the series of International Conferences on Software Language Engineering (SLE) will be held on October 11, 2010 in Eindhoven, as part of the 3rd instance of SLE. This conference series aims to integrate the different sub-communities of the software-language engineering community to foster cross-fertilisation and strengthen research overall. The Doctoral Symposium at SLE 2010 aims to contribute towards these goals by providing a forum for both early and late-stage Ph.D. students to present their research and get detailed feedback and advice from researchers both in and out of their particular research area. Consequently, the main objectives of this event are: – to give Ph.D. students an opportunity to write about and present their research; – to provide Ph.D. students with constructive feedback from their peers and from established researchers in their own and in different SLE sub-communities; – to build bridges for potential research collaboration; and – to foster integrated thinking about SLE challenges across sub-communities. All Ph.D. students participating in the Doctoral Symposium submitted an extended abstract describing their doctoral research. Based on a good set of submisssions we were able to accept 13 submissions for participation in the Doctoral Symposium. These proceedings present final revised versions of these accepted research abstracts. We are particularly happy to note that submissions to the Doctoral Symposium covered a wide range of SLE topics drawn from all SLE sub-communities. In selecting submissions for the Doctoral Symposium, we were supported by the members of the Doctoral-Symposium Selection Committee (SC), representing senior researchers from all areas of the SLE community.We would like to thank them for their substantial effort, without which this Doctoral Symposium would not have been possible. Throughout, they have provided reviews that go beyond the normal format of a review being extra careful in pointing out potential areas of improvement of the research or its presentation. Hopefully, these reviews themselves will already contribute substantially towards the goals of the symposium and help students improve and advance their work. Furthermore, all submitting students were also asked to provide two reviews for other submissions. The members of the SC went out of their way to comment on the quality of these reviews helping students improve their reviewing skills

1st doctoral symposium of the international conference on software language engineering (SLE) : collected research abstracts, October 11, 2010, Eindhoven, The Netherlands

The first Doctoral Symposium to be organised by the series of International Conferences on Software Language Engineering (SLE) will be held on October 11, 2010 in Eindhoven, as part of the 3rd instance of SLE. This conference series aims to integrate the different sub-communities of the software-language engineering community to foster cross-fertilisation and strengthen research overall. The Doctoral Symposium at SLE 2010 aims to contribute towards these goals by providing a forum for both early and late-stage Ph.D. students to present their research and get detailed feedback and advice from researchers both in and out of their particular research area. Consequently, the main objectives of this event are: – to give Ph.D. students an opportunity to write about and present their research; – to provide Ph.D. students with constructive feedback from their peers and from established researchers in their own and in different SLE sub-communities; – to build bridges for potential research collaboration; and – to foster integrated thinking about SLE challenges across sub-communities. All Ph.D. students participating in the Doctoral Symposium submitted an extended abstract describing their doctoral research. Based on a good set of submisssions we were able to accept 13 submissions for participation in the Doctoral Symposium. These proceedings present final revised versions of these accepted research abstracts. We are particularly happy to note that submissions to the Doctoral Symposium covered a wide range of SLE topics drawn from all SLE sub-communities. In selecting submissions for the Doctoral Symposium, we were supported by the members of the Doctoral-Symposium Selection Committee (SC), representing senior researchers from all areas of the SLE community.We would like to thank them for their substantial effort, without which this Doctoral Symposium would not have been possible. Throughout, they have provided reviews that go beyond the normal format of a review being extra careful in pointing out potential areas of improvement of the research or its presentation. Hopefully, these reviews themselves will already contribute substantially towards the goals of the symposium and help students improve and advance their work. Furthermore, all submitting students were also asked to provide two reviews for other submissions. The members of the SC went out of their way to comment on the quality of these reviews helping students improve their reviewing skills

Dynamic Workflow-Engine

We present and assess the novel thesis that a language commonly accepted for requirement elicitation is worth using for configuration of business process automation systems. We suggest that Cockburn's well accepted requirements elicitation language - the written use case language, with a few extensions, ought to be used as a workflow modelling language. We evaluate our thesis by studying in detail an industrial implementation of a workflow engine whose workflow modelling language is our extended written use case language; by surveying the variety of business processes that can be expressed by our extended written use case language; and by empirically assessing the readability of our extended written use case language. Our contribution is sixfold: (i) an architecture with which a workflow engine whose workflow modelling language is an extended written use case language can be built, configured, used and monitored; (ii) a detailed study of an industrial implementation of use case oriented workflow engine; (iii) assessment of the expressive power of the extended written use case language which is based on a known pattern catalogue; (iv) another assessments of the expressive power of the extended written use case language which is based on an equivalence to a formal model that is known to be expressive; (v) an empirical evaluation in industrial context of the readability of our extended written use case language in comparison to the readability of the incumbent graphical languages; and (vi) reflections upon the state of the art, methodologies, our results, and opportunities for further research. Our conclusions are that a workflow engine whose workflow modelling language is an extended written use case language can be built, configured, used and monitored; that in an environment that calls upon an extended written use case language as a workflow modelling language, the transition between the modelling and verification state, enactment state, and monitoring state is dynamic; that a use case oriented workflow engine was implemented in industrial settings and that the approach was well accepted by management, workflow configuration officers and workflow participants alike; that the extended written use case language is quite expressive, as much as the incumbent graphical languages; and that in industrial context an extended written use case language is an efficient communication device amongst stakeholders