Analytical Studies of Fragmented-Spectrum Multi-Level OFDM-CDMA Technique in Cognitive Radio Networks

In this paper, we present a multi-user resource allocation framework using fragmented-spectrum synchronous OFDM-CDMA modulation over a frequency-selective fading channel. In particular, given pre-existing communications in the spectrum where the system is operating, a channel sensing and estimation method is used to obtain information of subcarrier availability. Given this information, some real-valued multi-level orthogonal codes, which are orthogonal codes with values of $\{\pm1,\pm2,\pm3,\pm4, ... \}$, are provided for emerging new users, i.e., cognitive radio users. Additionally, we have obtained a closed form expression for bit error rate of cognitive radio receivers in terms of detection probability of primary users, CR users' sensing time and CR users' signal to noise ratio. Moreover, simulation results obtained in this paper indicate the precision with which the analytical results have been obtained in modeling the aforementioned system.Comment: 6 pages and 3 figure

A resource management scheme for multi-user GFDM with adaptive modulation in frequency selective fading channels

The topic is "Low-latency communication for machine-type communication in LTE-A" and need to be specified in more detail.This final project focus on designing and evaluating a resource management scheme for a multi-user generalized frequency division multiplexing (GFDM) system, when a frequency selective fading channel and adaptive modulation is used. GFDM with adaptive subcarrier, sub-symbol and power allocation are considered. Assuming that the transmitter has a perfect knowledge of the instantaneous channel gains for all users, I propose a multi-user GFDM subcarrier, sub-symbol and power allocation algorithm to minimize the total transmit power. This work analyzes the performance of using a specific set of parameters for aligning GFDM with long term evolution (LTE) grid. The results show that the performance of the proposed algorithm using GFDM is closer to the performance of using OFDM and outperforms multiuser GFDM systems with static frequency division multiple access (FDMA) techniques which employ fixed subcarrier allocation schemes. The advantage between GFDM and OFDM is that the latency of the system can be reduced by a factor of 15 if independent demodulation is considered.El objetivo de este proyecto final es el de diseñar y evaluar un esquema para administrar los recursos de un sistema multi-usuario donde se utiliza generalized frequency division multiplexing (GFDM), cuando el canal es de frequencia de desvanecimiento selectivo y se utiliza modulación adaptiva. Consideramos un sistema GFDM con subportadora, sub-símbolo i asignación de potencia adaptiva. Asumiendo que el transmisor conoce perfectamente el estado del canal para todos los usuarios, propongo un algoritmo que asigna los recursos de forma que la potencia total de transmisión es mínima. Este trabajo analiza la eficiencia de utilizar un grupo de parámetros concretos para alinear el sistema GFDM con el sistema de LTE. Los resultados muestran que el comportamiento del algoritmo en GFDM es muy similar al de OFDM, pero mucho mayor que cuando se compara con sistemas de asignación de recursos estáticos.L’objectiu d’aquest projecte final es dissenyar i avaluar un esquema per administrar els recursos per a un sistema multi-usuari fent servir generalized frequency division multiplexing (GFDM), quan el canal es de freqüència esvaniment selectiu i es fa servir modulació adaptativa. Considerem un sistema GFDM amb subportadora, sub-símbol i assignació de potencia adaptativa. Assumint que el transmissor coneix perfectament l’estat del canal per tots els usuaris, proposo un algoritme que assigna els recursos de forma que la potencia total de transmissió es la mínima. Aquest treball analitza l’eficiència de fer servir un grup de paràmetres concrets per tal d’alinear el sistema GFDM amb el sistema de LTE. Els resultats mostren que el comportament de l’algoritme en GFDM es molt similar al de OFDM i que millora bastant els resultats quan el comparem amb sistemes d’assignament de recursos estàtics

Multi-service systems: an enabler of flexible 5G air-interface

Multi-service system is an enabler to flexibly support diverse communication requirements for the next generation wireless communications. In such a system, multiple types of services co-exist in one baseband system with each service having its optimal frame structure and low out of band emission (OoBE) waveforms operating on the service frequency band to reduce the inter-service-band-interference (ISvcBI). In this article, a framework for multi-service system is established and the challenges and possible solutions are studied. The multi-service system implementation in both time and frequency domain is discussed. Two representative subband filtered multicarrier (SFMC) waveforms: filtered orthogonal frequency division multiplexing (F-OFDM) and universal filtered multi-carrier (UFMC) are considered in this article. Specifically, the design methodology, criteria, orthogonality conditions and prospective application scenarios in the context of 5G are discussed. We consider both single-rate (SR) and multi-rate (MR) signal processing methods. Compared with the SR system, the MR system has significantly reduced computational complexity at the expense of performance loss due to inter-subband-interference (ISubBI) in MR systems. The ISvcBI and ISubBI in MR systems are investigated with proposed low-complexity interference cancelation algorithms to enable the multi-service operation in low interference level conditions

A baseband wireless spectrum hypervisor for multiplexing concurrent OFDM signals

The next generation of wireless and mobile networks will have to handle a significant increase in traffic load compared to the current ones. This situation calls for novel ways to increase the spectral efficiency. Therefore, in this paper, we propose a wireless spectrum hypervisor architecture that abstracts a radio frequency (RF) front-end into a configurable number of virtual RF front ends. The proposed architecture has the ability to enable flexible spectrum access in existing wireless and mobile networks, which is a challenging task due to the limited spectrum programmability, i.e., the capability a system has to change the spectral properties of a given signal to fit an arbitrary frequency allocation. The proposed architecture is a non-intrusive and highly optimized wireless hypervisor that multiplexes the signals of several different and concurrent multi-carrier-based radio access technologies with numerologies that are multiple integers of one another, which are also referred in our work as radio access technologies with correlated numerology. For example, the proposed architecture can multiplex the signals of several Wi-Fi access points, several LTE base stations, several WiMAX base stations, etc. As it able to multiplex the signals of radio access technologies with correlated numerology, it can, for instance, multiplex the signals of LTE, 5G-NR and NB-IoT base stations. It abstracts a radio frequency front-end into a configurable number of virtual RF front ends, making it possible for such different technologies to share the same RF front-end and consequently reduce the costs and increasing the spectral efficiency by employing densification, once several networks share the same infrastructure or by dynamically accessing free chunks of spectrum. Therefore, the main goal of the proposed approach is to improve spectral efficiency by efficiently using vacant gaps in congested spectrum bandwidths or adopting network densification through infrastructure sharing. We demonstrate mathematically how our proposed approach works and present several simulation results proving its functionality and efficiency. Additionally, we designed and implemented an open-source and free proof of concept prototype of the proposed architecture, which can be used by researchers and developers to run experiments or extend the concept to other applications. We present several experimental results used to validate the proposed prototype. We demonstrate that the prototype can easily handle up to 12 concurrent physical layers

Efficient Fast-Convolution-Based Waveform Processing for 5G Physical Layer

This paper investigates the application of fast-convolution (FC) filtering schemes for flexible and effective waveform generation and processing in the fifth generation (5G) systems. FC-based filtering is presented as a generic multimode waveform processing engine while, following the progress of 5G new radio standardization in the Third-Generation Partnership Project, the main focus is on efficient generation and processing of subband-filtered cyclic prefix orthogonal frequency-division multiplexing (CP-OFDM) signals. First, a matrix model for analyzing FC filter processing responses is presented and used for designing optimized multiplexing of filtered groups of CP-OFDM physical resource blocks (PRBs) in a spectrally well-localized manner, i.e., with narrow guardbands. Subband filtering is able to suppress interference leakage between adjacent subbands, thus supporting independent waveform parametrization and different numerologies for different groups of PRBs, as well as asynchronous multiuser operation in uplink. These are central ingredients in the 5G waveform developments, particularly at sub-6-GHz bands. The FC filter optimization criterion is passband error vector magnitude minimization subject to a given subband band-limitation constraint. Optimized designs with different guardband widths, PRB group sizes, and essential design parameters are compared in terms of interference levels and implementation complexity. Finally, extensive coded 5G radio link simulation results are presented to compare the proposed approach with other subband-filtered CP-OFDM schemes and time-domain windowing methods, considering cases with different numerologies or asynchronous transmissions in adjacent subbands. Also the feasibility of using independent transmitter and receiver processing for CP-OFDM spectrum control is demonstrated