On detection of OFDM signals for cognitive radio applications

As the requirement for wireless telecommunications services continues to grow, it has become increasingly important to ensure that the Radio Frequency (RF) spectrum is managed efficiently. As a result of the current spectrum allocation policy, it has been found that portions of RF spectrum belonging to licensed users are often severely underutilised, at particular times and geographical locations. Awareness of this problem has led to the development of Dynamic Spectrum Access (DSA) and Cognitive Radio (CR) as possible solutions. In one variation of the shared-use model for DSA, it is proposed that the inefficient use of licensed spectrum could be overcome by enabling unlicensed users to opportunistically access the spectrum when the licensed user is not transmitting. In order for an unlicensed device to make decisions, it must be aware of its own RF environment and, therefore, it has been proposed that DSA could been abled using CR. One approach that has be identified to allow the CR to gain information about its operating environment is spectrum sensing. An interesting solution that has been identified for spectrum sensing is cyclostationary detection. This property refers to the inherent periodic nature of the second order statistics of many communications signals. One of the most common modulation formats in use today is Orthogonal Frequency Division Multiplexing (OFDM), which exhibits cyclostationarity due to the addition of a Cyclic Prefix (CP). This thesis examines several statistical tests for cyclostationarity in OFDM signals that may be used for spectrum sensing in DSA and CR. In particular, focus is placed on statistical tests that rely on estimation of the Cyclic Autocorrelation Function (CAF). Based on splitting the CAF into two complex component functions, several new statistical tests are introduced and are shown to lead to an improvement in detection performance when compared to the existing algorithms. The performance of each new algorithm is assessed in Additive White Gaussian Noise (AWGN), impulsive noise and when subjected to impairments such as multipath fading and Carrier Frequency Offset (CFO). Finally, each algorithm is targeted for Field Programmable Gate Array (FPGA) implementation using a Xilinx 7 series device. In order to keep resource costs to a minimum, it is suggested that the new algorithms are implemented on the FPGA using hardware sharing, and a simple mathematical re-arrangement of certain tests statistics is proposed to circumvent a costly division operation.As the requirement for wireless telecommunications services continues to grow, it has become increasingly important to ensure that the Radio Frequency (RF) spectrum is managed efficiently. As a result of the current spectrum allocation policy, it has been found that portions of RF spectrum belonging to licensed users are often severely underutilised, at particular times and geographical locations. Awareness of this problem has led to the development of Dynamic Spectrum Access (DSA) and Cognitive Radio (CR) as possible solutions. In one variation of the shared-use model for DSA, it is proposed that the inefficient use of licensed spectrum could be overcome by enabling unlicensed users to opportunistically access the spectrum when the licensed user is not transmitting. In order for an unlicensed device to make decisions, it must be aware of its own RF environment and, therefore, it has been proposed that DSA could been abled using CR. One approach that has be identified to allow the CR to gain information about its operating environment is spectrum sensing. An interesting solution that has been identified for spectrum sensing is cyclostationary detection. This property refers to the inherent periodic nature of the second order statistics of many communications signals. One of the most common modulation formats in use today is Orthogonal Frequency Division Multiplexing (OFDM), which exhibits cyclostationarity due to the addition of a Cyclic Prefix (CP). This thesis examines several statistical tests for cyclostationarity in OFDM signals that may be used for spectrum sensing in DSA and CR. In particular, focus is placed on statistical tests that rely on estimation of the Cyclic Autocorrelation Function (CAF). Based on splitting the CAF into two complex component functions, several new statistical tests are introduced and are shown to lead to an improvement in detection performance when compared to the existing algorithms. The performance of each new algorithm is assessed in Additive White Gaussian Noise (AWGN), impulsive noise and when subjected to impairments such as multipath fading and Carrier Frequency Offset (CFO). Finally, each algorithm is targeted for Field Programmable Gate Array (FPGA) implementation using a Xilinx 7 series device. In order to keep resource costs to a minimum, it is suggested that the new algorithms are implemented on the FPGA using hardware sharing, and a simple mathematical re-arrangement of certain tests statistics is proposed to circumvent a costly division operation

Channel estimation techniques for filter bank multicarrier based transceivers for next generation of wireless networks

A dissertation submitted to Faculty of Engineering and the Built Environment, University of the Witwatersrand, Johannesburg, in fulfillment of the requirements for the degree of Master of Science in Engineering (Electrical and Information Engineering), August 2017The fourth generation (4G) of wireless communication system is designed based on the principles of cyclic prefix orthogonal frequency division multiplexing (CP-OFDM) where the cyclic prefix (CP) is used to combat inter-symbol interference (ISI) and inter-carrier interference (ICI) in order to achieve higher data rates in comparison to the previous generations of wireless networks. Various filter bank multicarrier systems have been considered as potential waveforms for the fast emerging next generation (xG) of wireless networks (especially the fifth generation (5G) networks). Some examples of the considered waveforms are orthogonal frequency division multiplexing with offset quadrature amplitude modulation based filter bank, universal filtered multicarrier (UFMC), bi-orthogonal frequency division multiplexing (BFDM) and generalized frequency division multiplexing (GFDM). In perfect reconstruction (PR) or near perfect reconstruction (NPR) filter bank designs, these aforementioned FBMC waveforms adopt the use of well-designed prototype filters (which are used for designing the synthesis and analysis filter banks) so as to either replace or minimize the CP usage of the 4G networks in order to provide higher spectral efficiencies for the overall increment in data rates. The accurate designing of the FIR low-pass prototype filter in NPR filter banks results in minimal signal distortions thus, making the analysis filter bank a time-reversed version of the corresponding synthesis filter bank. However, in non-perfect reconstruction (Non-PR) the analysis filter bank is not directly a time-reversed version of the corresponding synthesis filter bank as the prototype filter impulse response for this system is formulated (in this dissertation) by the introduction of randomly generated errors. Hence, aliasing and amplitude distortions are more prominent for Non-PR. Channel estimation (CE) is used to predict the behaviour of the frequency selective channel and is usually adopted to ensure excellent reconstruction of the transmitted symbols. These techniques can be broadly classified as pilot based, semi-blind and blind channel estimation schemes. In this dissertation, two linear pilot based CE techniques namely the least square (LS) and linear minimum mean square error (LMMSE), and three adaptive channel estimation schemes namely least mean square (LMS), normalized least mean square (NLMS) and recursive least square (RLS) are presented, analyzed and documented. These are implemented while exploiting the near orthogonality properties of offset quadrature amplitude modulation (OQAM) to mitigate the effects of interference for two filter bank waveforms (i.e. OFDM/OQAM and GFDM/OQAM) for the next generation of wireless networks assuming conditions of both NPR and Non-PR in slow and fast frequency selective Rayleigh fading channel. Results obtained from the computer simulations carried out showed that the channel estimation schemes performed better in an NPR filter bank system as compared with Non-PR filter banks. The low performance of Non-PR system is due to the amplitude distortion and aliasing introduced from the random errors generated in the system that is used to design its prototype filters. It can be concluded that RLS, NLMS, LMS, LMMSE and LS channel estimation schemes offered the best normalized mean square error (NMSE) and bit error rate (BER) performances (in decreasing order) for both waveforms assuming both NPR and Non-PR filter banks. Keywords: Channel estimation, Filter bank, OFDM/OQAM, GFDM/OQAM, NPR, Non-PR, 5G, Frequency selective channel.CK201

Implementation of Autocorrelation-based Feature Detector for Cognitive Radio

Nykyiset ja tulevat langattomat järjestelmät tarvitsevat yhä enemmän taajuuskaistoja uusille palveluille. Lähes koko käytettävissä oleva radiospektri on lisensoitu, mutta suurinta osaa lisensoiduista taajuuskaistoista ei hyödynnetä tehokkaasti tiukkojen käyttöehtojen vuoksi. Kognitiiviset radiot voivat helpottaa tätä ongelmaa, tunnistamalla vajaasti käytetyn kaistan ja ottamalla sen käyttöön häiritsemättä kaistan lisensoinutta käyttäjää. Kognitiivisten radioiden tärkein ominaisuus on löytää vapaat spektrin alueet sekä tunnistaa lisensoitujen käyttäjien lähetykset. Tässä diplomityössä esitetään autokorrelaatioon perustuvan spektrinhavainnointialgoritmin suunnittelu ja toteutus. Algoritmi tunnistaa OFDM-signaaleihin perustuvia järjestelmiä. Toteutuksessa algoritmia on muokattu, ja laskentaa yksinkertaistettu tarvittavan pinta-alan ja tehonkulutuksen pienentämiseksi. Implementaatio ja VHDL kuvaukset verifioidaan simulaatioilla. Algoritmi on toteutettu FPGA kehitysalustalle, ja sen toiminta on varmennettu mittauksilla. Algoritmi toteutettiin myös ASIC-piirinä tehonkulutus- ja pinta-alatietojen saamiseksi. FPGA-toteutus tarvitsee 987 LUT flip-flop paria, ja sen tehonkulutus oli 3.69 mW. ASIC:na piiri toteutettiin 65 nm CMOS prosessilla pinta-alan ollessa 0.26 mm2 ja tehonkulutuksen 1.02 mW.Emerging wireless systems demandmore frequency bands in order to provide high data rate services. Most of the licensed frequency bands are underutilized, because of the rigid spectrum allocation. Cognitive radios aim to relieve the situation by identifying and exploiting the underutilized radio spectrum. A key task of the cognitive radio is spectrum sensing, which is intended to detect unoccupied frequency slots and licensed spectrum user transmissions. This thesis presents an implementation of an autocorrelation-based feature detector for orthogonal frequency-division multiplexing (OFDM) based primary user signals. The autocorrelation-based detection algorithm is optimized in order to achieve power and area efficient hardware realization. The VHDL implementation is presented in detail and verified by simulations. After verification, the algorithm is implemented in a field-programmable gate array (FPGA) evaluation environment, and the performance is verified with measurements. An application-specific integrated circuit (ASIC) implementation is also realized in order to obtain comparable data of power consumption and area. The algorithm implementation with DC offset compensation performed as predicted by simulations. The FPGA implementation requires 987 LUT flip-flop units, and the dynamic power consumption is 3.69 mW. The ASIC circuit implemented with 65 nm CMOS process occupies an area of 0.26 mm2, and has power consumption of 1.02 mW

Enhanced Spectrum Sensing for Cognitive Cellular Systems

This dissertation aims at improving spectrum sensing algorithms in order to effectively apply them to cellular systems. In wireless communications, cellular systems occupy a significant part of the spectrum. The spectrum usage for cellular systems are rapidly expanding due to the increasing demand for wireless services in our society. This results in radio frequency spectrum scarcity. Cellular systems can effectively handle this issue through cognitive mechanisms for spectrum utilization. Spectrum sensing plays the first stage of cognitive cycles for the adaptation to radio environments. This dissertation focuses on maximizing the reliability of spectrum sensing to satisfy regulation requirements with respect to high spectrum sensing performance and an acceptable error rate. To overcome these challenges, characteristics of noise and manmade signals are exploited for spectrum sensing. Moreover, this dissertation considers system constraints, the compatibility with the current and the trends of future generations. Newly proposed and existing algorithms were evaluated in simulations in the context of cellular systems. Based on a prototype of cognitive cellular systems (CCSs), the proposed algorithms were assessed in realistic scenarios. These algorithms can be applied to CCSs for the awareness of desired signals in licensed and unlicensed bands. For orthogonal frequency-division multiplexing (OFDM) signals, this dissertation exploits the characteristics of pilot patterns and preambles for new algorithms. The new algorithms outperform the existing ones, which also utilize pilot patterns. Additionally, the new algorithms can work with short observation durations, which is not possible with the existing algorithms. The Digital Video Broadcasting - Terrestrial (DVB-T) standard is taken as an example application for the algorithms. The algorithms can also be developed for filter bank multicarrier (FBMC) signals, which are a potential candidate for multiplexing techniques in the next cellular generations. The experimental results give insights for the reliability of the algorithms, taking system constraints v into account. Another new sensing algorithm, based on a preamble, is proposed for the DVBT2 standard, which is the second generation of of DVB system. DVB-T2 systems have been deployed in worldwide regions. This algorithm can detect DVB-T2 signals in a very short observation interval, which is helpful for the in-band sensing mode, to protect primary users (in nearly real-time) from the secondary transmission. An enhanced spectrum sensing algorithm based on cyclostationary signatures is proposed to detect desired signals in very low signal-to-noise ratios (SNRs). This algorithm can be developed to detect the single-carrier frequency division multiple access (SC-FDMA) signal, which is adopted for the uplink of long-term evolution (LTE) systems. This detector substantially outperforms the existing detection algorithms with the marginal complexity of some scalar multiplications. The test statistics are explicitly formulated in mathematical formulas, which were not presented in the previous work. The formulas and simulation results provide a useful strategy for cyclostationarity-based detection with different modulation types. For multiband spectrum sensing, an effective scheme is proposed not only to detect but also to classify LTE signals in multiple channels in a wide frequency range. To the best of our knowledge, no scheme had previously been described to perform the sensing tasks. The scheme is reliable and flexible for implementation, and there is almost no performance degradation caused by the scheme compared to single-channel spectrum sensing. The multiband sensing scheme was experimentally assessed in scenarios where the existing infrastructures are interrupted to provide mobile communications. The proposed algorithms and scheme facilitate cognitive capabilities to be applied to real cellular communications. This enables the significantly improved spectrum utilization of CCSs

Spectrum handoff strategy for cognitive radio-based Mac in industrial wirless sensor and actuator networks

In this thesis, a Cognitive Radio(CR)-based MAC for Industrial Wireless Sensor and Actuator Network (IWSAN) applications is proposed. IWSANs are typically used for closed-loop control applications, and they demand strict requirements in terms of time and robustness. Low latency and low error rates are required in order not to endanger persons or machinery. Moreover, these applications operate in industrial environments such as factories or transport scenarios (as aeronautics or railway) where multipath fading and shadowing are present due to metal surfaces. Furthermore, interference from other communication systems or industrial machinery is also common in these environments. The proposed MAC, based on the CR paradigm, is capable of ensuring time and robustness requirements in industrial channels. In the process of designing the CR-based MAC for IWSAN applications, a comparison between several non-CR-based MACs and CR-based MACs has been carried out. This comparison, which allows stating the benefits of CR for these applications, is presented in this thesis. The performance of every MAC is determined theoretically using Network Calculus, and it is validated through OPNET simulations. CR solutions, due to their adaptability characteristics, are capable of avoiding interference and ensuring robustness in industrial environments. However, none of the selected MACs are capable of ensuring robustness without comprising time requirements, since interference is avoided but not in a bounded time. On the other hand, the MAC proposed in this thesis is capable of avoiding interference ensuring time and robustness requirements at the same time. This MAC is therefore suitable for IWSAN applications. To ensure a deterministic behavior against interference, a novel handoff algorithm, which detects interference and hops to another channel, has been proposed. This algorithm has been designed to be used jointly with one of the evaluated MACs. The detection of the interference and the hop to another channel is done in a bounded time, because the proposed algorithm detects interference while the system is transmitting. The performance of this proposal is evaluated using Network Calculus and OPNET simulations, and the results are compared with the system without the proposed handoff algorithm. The comparison of the results shows how the evaluated MAC is only capable of ensuring both time and robustness requirements when the proposed handoff strategy is used. Moreover, the spectrum sensing algorithm used to obtain information about the environment is delved and its performance is measured through MATLAB simulations. An energy detector has been chosen due to its simplicity. Also, a cyclostationary Modulation Classifier is presented and a simplification has been carried out allowing its implementation on real hardware. The Modulation Classifier is capable of distinguishing between OFDM, QPSK and GFSK signals. The performance of the algorithm is presented in this thesis for different signals and for different receiver impairments such as frequency offset, DC offset and I/Q imbalance. Finally, a cognitive platform to validate the spectrum sensing algorithms is presented. This platform has been designed using a Xilinx Virtex 6 FPGA by a working group composed of researchers from IK4-Ikerlan and Mondragon Unibertsitatea. The platform, which uses both spectrum sensing algorithms, is an Ethernet-to-RF bridge. It has been designed to replace an Ethernet wired link by a wireless one for IWSAN applications. The proposed platform ensures a reliable communication link against interference. In the proposed implementation, the energy detector is used by the transmitter in order to find a free channel to transmit data, whereas the modulation classifier is used by the receiver in order to distinguish between the signal transmitted by the RF-Ethernet bridge and other signals. In this way the receiver can find the channel where the transmitter is carrying out the communication.En esta tesis se propone una MAC basada en el paradigma de la Radio Cognitiva (RC) para redes de sensores y actuadores inalámbricos industriales. Estas redes se suelen utilizar para aplicaciones de control en lazo cerrado, que exigen requisitos estrictos de tiempo y robustez. Para no poner en peligro la salud de las personas o la maquinaria es necesario que la red asegure una baja latencia y una tasa baja de errores. Además, al trabajar en ambientes industriales como fábricas o transportes (trenes, aviones, etc.), estas redes tienen que hacer frente a canales con mucho desvanecimiento por multitrayecto y efecto sombra debido a las superficies metálicas. También es común en estos entornos que haya interferencias de otros sistemas de comunicaciones o de la propia maquinaria industrial. La MAC propuesta en esta tesis es capaz de asegurar los requisitos temporales y de robustez demandados trabajando en este tipo de entornos. En el proceso de diseño de la MAC basada en RC para redes de sensores y actuadores inalámbricos industriales, se ha llevado a cabo una comparación de diferentes MACs diseñadas para estas redes. Se han evaluado tanto MACs basadas en RC como no basadas en ella, estableciendo las ventajas de la RC para estas aplicaciones. La evaluación se ha llevado a cabo haciendo un estudio teórico mediante Network Calculus, cuyos resultados se han validado mediante simulaciones en OPNET. Los resultados muestran como la RC es capaz de evitar interferencias y asegurar robustez en ambientes industriales. Sin embargo, ninguna de las MACs seleccionadas ha conseguido asegurar ambos requisitos, temporales y de robustez, al mismo tiempo; se puede evitar las interferencias pero no sin comprometer los requisitos temporales de la aplicación. Sin embargo, la MAC propuesta es capaz de evitar interferencias asegurando al mismo tiempo los requisitos temporales y de robustez. Por lo tanto, la MAC propuesta es apropiada para este tipo de redes. Para asegurar el comportamiento determinista del sistema, se ha propuesto un novedoso algoritmo de handoff que es capaz de detectar una interferencia y saltar a otro canal. Este algoritmo se ha diseñado para ser utilizado conjuntamente con una de las MACs previamente evaluadas. La detección de la interferencia y el salto a otro canal se hace en un tiempo determinado de tiempo, ya que es posible detectar interferencias mientras el sistema está transmitiendo. Su rendimiento se ha evaluado mediante Network Calculus y simulaciones en OPNET, y se ha comparado con los resultados obtenidos con la MAC cuando no se utiliza el esquema propuesto. De la comparación se deduce que el esquema de handoff añade a la MAC la capacidad de asegurar a la vez los requisitos temporales y de robustez. Además, en la tesis se explica el algoritmo de spectrum sensing que la MAC utiliza para obtener información del entorno, y su rendimiento se ha estudiado mediante simulaciones en MATLAB. Debido a su simplicidad, se ha optado por un detector de energía para este propósito. También se presenta un clasificador de modulaciones cicloestacionario. Este clasificador ha sido simplificado todo lo posible para posibilitar su implementación en hardware real. El clasificador de modulaciones es capaz de distinguir entre señales OFDM, QPSK y GFSK. Su rendimiento se detalla para diferentes señales y para diferentes deficiencias presentes en el receptor, como son offset de frecuencia, offset de continua o desequilibrios I/Q. Por último, se presenta una plataforma cognitiva que se ha utilizado para validar los algoritmos de spectrum sensing. Un grupo de trabajo compuesto por investigadores de IK4-Ikerlan y Mondragon Unibertsitatea ha diseñado esta plataforma sobre una FPGA Virtex 6 de Xilinx. La plataforma, que utiliza los dos algoritmos de spectrum sensing, es un puente Ethernet-RF. Su objetivo es reemplazar un enlace cableado de Ethernet por uno inalámbrico para aplicaciones de redes de sensores y actuadores industriales. Gracias a los algoritmos de spectrum sensing, la plataforma es capaz de asegurar un enlace robusto ante interferencias. El detector de energía se utiliza en el transmisor para encontrar los posibles canales libres donde transmitir la información. Mientras que el clasificador de modulaciones se utiliza en el receptor para distinguir entre la señal del transmisor y otras posibles señales. Esto permite al receptor saber en qué canal de todos los posibles está el transmisor.Tesi honetan proposatzen da Irrati Kognitiboaren (IK) paradigman oinarritutako MAC bat industriako haririk gabeko sentsore eta eragingailuen sareetarako. Sare horiek begizta itxiko kontrol aplikazioetarako erabili ohi dira, denbora eta sendotasunaren aldetik baldintza ugari eskatzen dute eta. Pertsonen osasuna eta makinak arriskuan ez jartzeko, beharrezkoa da sareak latentzia eta hutsegite tasa txikiak bermatzea. Gainera, industri giroetan lan egiteko direnez, esaterako, lantegietan edo garraioetan (trenak, hegazkinak, etab.), sare horiek gai izan behar dira gainazal metalikoek eragiten dituzten ibilbide aniztunaren eta itzal efektuaren ondorioz asko barreiatzen diren kanalei aurre egiteko. Ingurune horien ohiko ezaugarria da, baita ere, beste komunikazio sistema batzuen edo industriako makinen beraien interferentziak egotea. Tesi honetan proposatzen den MACa gai da honelako inguruetan lan egiteko denborari eta sendotasunari dagokienez eskatzen dituen baldintzak ziurtatzeko. IKan oinarrituta haririk gabeko sentsore eta eragingailu industrialen sareetarako MACa diseinatzeko prozesuan, horrelako sareetarako aurkeztu diren hainbat MAC alderatu dira. IKan oinarritutako MACak zein bestelakoak ebaluatu dira, eta IKak aplikazio hauetarako dituen abantailak ezarri dira. Ebaluaziorako Network Calculus erabili da, zeinaren bidez azterketa teoriko bat egin baita, eta azterketaren emaitzak OPNETen simulazioak eginda baliozkotu dira. Emaitzek erakusten dutenez, IKa gai da industriako inguruneetan interferentziak ekidin eta sendotasuna ziurtatzeko. Halere, aukeratu diren MACetatik batek ere ez du lortu baldintza biak, denborari buruzkoa zein sendotasunari buruzkoa, aldi berean ziurtatzea; interferentziak ekidin daitezke, baina ez aplikazioaren denborari buruzko baldintzak arriskuan jarri gabe. Dena dela, proposatu den MACak portaera determinista bat ziurtatzen du interferentziekiko, eta aldi berean denborari eta sendotasunari buruzko baldintzak ere ziurtatzen ditu. Hortaz, MAC hau egokia da sare mota honetarako. Sistemaren portaera determinista ziurtatzeko, handoff algoritmo berritzailea proposatu da, zeina interferentzia bat antzeman eta beste kanal bat igarotzeko gai den. Algoritmo hori aurretik ebaluatutakoa MACetako batekin batera erabiltzeko diseinatu da. Interferentzia antzeman eta beste kanal batera salto egitea denbora jakin batean egiten da, izan ere, sistema transmititzen ari dela antzeman baitaitezke interferentziak. Network Calculusen bitartez eta OPNETeko simulazioen bitartez ebaluatu da sistemaren errendimendua, eta proposatutako eskema erabiltzen ez denean MACak ematen dituen emaitzekin alderatu da. Alderaketa horretatik ondorioztatzen denez, handoff eskemak denborari eta sendotasunari buruzko baldintzak batera ziurtatzeko ahalmena ematen dio MACari. Gainera, tesiak azaltzen du inguruneari buruzko informazioa eskuratzeko MACak erabiltzen duen spectrum sensing algoritmoa, eta bere errendimendua MATLABen simulazioak eginez aztertu da. Bere sinpletasuna dela eta, energia detektore bat aukeratu da asmo honetarako. Modulazio sailkatzaile zikloegonkor bat ere aurkezten da. Sailkapen hori ahalik eta gehien sinplifikatu da benetako hardwarean inplementatu ahal izateko. Modulazioen sailkatzaileak OFDM, QPSK eta GFSK seinaleak bereizi ditzake. Bere errendimendua hargailuan dauden seinale eta akats desberdinetarako zehazten da, esaterako maiztasunaren offset-a,zuzenaren offset-a edo I/Q desorekak. Bukatzeko, spectrum sensing-eko algoritmoak baliozkotzeko erabili den plataforma kognitibo bat aurkezten da. IK4-Ikerlaneko eta Mondragon Unibertsitateko ikertzailez osatutako lantalde batek diseinatu du plataforma hori Xilinxen Virtex 6 FPGA baten oinarrutz. Plataformak spectrum sensing-eko bi algoritmo erabiltzen ditu eta Ethernet-RF zubi bat da. Bere helburua da Etherneteko kable bidezko lotura bat haririk gabeko batekin ordeztea industriako sentsore eta eragingailuen sareetan aplikatzeko. Spectrum sensing-eko algoritmoei esker, plataformak lotura sendoa bermatu dezake interferentziak gertatzen direnean. Energia detektorea transmisorean erabiltzen da informazioa transmititzeko erabilgarri egon daitezkeen kanalak aurkitzeko. Modulazioen sailkatzailea, berriz, hargailuan erabiltzen da transmisorearen seinalea eta egon daitezkeen beste seinale batzuk bereizteko. Horri esker, hargailuak badaki posible diren kanal guztietatik non dagoen transmisorea

FPGA IMPLEMENTATION OF A REALTIME CYCLOSTATIONARY FEATURE DETECTOR FOR OFDM SIGNALS

The demand for wireless connectivity has prompted regulatory authorities in the United States to investigate spectrum sharing of the DSRC band with U-NII operators. However, DSRC operation has public safety implications, and moreover, time-critical requirements due to the vehicular nature of its application. The field of cognitive radio has identified several sensing techniques for the identification of licensed operators in a given band. This thesis explores cyclostationary detection techniques for primary users. A method will be identified for the detection of the 802.11p OFDM modulation used for DSRC communications. A test statistic will be given that is invariant to the signal noise covariance to allow simple and robust operation. Finally, the detection algorithm will be implemented in FPGA digital logic in order to demonstrate the methods ability to be employed in a commercial radio chipset with minimum resource requirements, yet still provide real-time detection