Data hiding in multimedia - theory and applications

Multimedia data hiding or steganography is a means of communication using subliminal channels. The resource for the subliminal communication scheme is the distortion of the original content that can be tolerated. This thesis addresses two main issues of steganographic communication schemes: 1. How does one maximize the distortion introduced without affecting fidelity of the content? 2. How does one efficiently utilize the resource (the distortion introduced) for communicating as many bits of information as possible? In other words, what is a good signaling strategy for the subliminal communication scheme? Close to optimal solutions for both issues are analyzed. Many techniques for the issue for maximizing the resource, viz, the distortion introduced imperceptibly in images and video frames, are proposed. Different signaling strategies for steganographic communication are explored, and a novel signaling technique employing a floating signal constellation is proposed. Algorithms for optimal choices of the parameters of the signaling technique are presented. Other application specific issues like the type of robustness needed are taken into consideration along with the established theoretical background to design optimal data hiding schemes. In particular, two very important applications of data hiding are addressed - data hiding for multimedia content delivery, and data hiding for watermarking (for proving ownership). A robust watermarking protocol for unambiguous resolution of ownership is proposed

Spread spectrum-based video watermarking algorithms for copyright protection

Merged with duplicate record 10026.1/2263 on 14.03.2017 by CS (TIS)Digital technologies know an unprecedented expansion in the last years. The consumer can now benefit from hardware and software which was considered state-of-the-art several years ago. The advantages offered by the digital technologies are major but the same digital technology opens the door for unlimited piracy. Copying an analogue VCR tape was certainly possible and relatively easy, in spite of various forms of protection, but due to the analogue environment, the subsequent copies had an inherent loss in quality. This was a natural way of limiting the multiple copying of a video material. With digital technology, this barrier disappears, being possible to make as many copies as desired, without any loss in quality whatsoever. Digital watermarking is one of the best available tools for fighting this threat. The aim of the present work was to develop a digital watermarking system compliant with the recommendations drawn by the EBU, for video broadcast monitoring. Since the watermark can be inserted in either spatial domain or transform domain, this aspect was investigated and led to the conclusion that wavelet transform is one of the best solutions available. Since watermarking is not an easy task, especially considering the robustness under various attacks several techniques were employed in order to increase the capacity/robustness of the system: spread-spectrum and modulation techniques to cast the watermark, powerful error correction to protect the mark, human visual models to insert a robust mark and to ensure its invisibility. The combination of these methods led to a major improvement, but yet the system wasn't robust to several important geometrical attacks. In order to achieve this last milestone, the system uses two distinct watermarks: a spatial domain reference watermark and the main watermark embedded in the wavelet domain. By using this reference watermark and techniques specific to image registration, the system is able to determine the parameters of the attack and revert it. Once the attack was reverted, the main watermark is recovered. The final result is a high capacity, blind DWr-based video watermarking system, robust to a wide range of attacks.BBC Research & Developmen

Digital imaging technology assessment: Digital document storage project

An ongoing technical assessment and requirements definition project is examining the potential role of digital imaging technology at NASA's STI facility. The focus is on the basic components of imaging technology in today's marketplace as well as the components anticipated in the near future. Presented is a requirement specification for a prototype project, an initial examination of current image processing at the STI facility, and an initial summary of image processing projects at other sites. Operational imaging systems incorporate scanners, optical storage, high resolution monitors, processing nodes, magnetic storage, jukeboxes, specialized boards, optical character recognition gear, pixel addressable printers, communications, and complex software processes

DIGITAL WATERMARKING FOR COMPACT DISCS AND THEIR EFFECT ON THE ERROR CORRECTION SYSTEM

A new technique, based on current compact disc technology, to image the transparent surface of a compact disc, or additionally the reflective information layer, has been designed, implemented and evaluated. This technique (image capture technique) has been tested and successfully applied to the detection of mechanically introduced compact disc watermarks and biometrical information with a resolution of 1.6um x l4um. Software has been written which, when used with the image capture technique, recognises a compact disc based on its error distribution. The software detects digital watermarks which cause either laser signal distortions or decoding error events. Watermarks serve as secure media identifiers. The complete channel coding of a Compact Disc Audio system including EFM modulation, error-correction and interleaving have been implemented in software. The performance of the error correction system of the compact disc has been assessed using this simulation model. An embedded data channel holding watermark data has been investigated. The covert channel is implemented by means of the error-correction ability of the Compact Disc system and was realised by aforementioned techniques like engraving the reflective layer or the polysubstrate layer. Computer simulations show that watermarking schemes, composed of regularly distributed single errors, impose a minimum effect on the error correction system. Error rates increase by a factor of ten if regular single-symbol errors per frame are introduced - all other patterns further increase the overall error rates. Results show that background signal noise has to be reduced by a factor of 60% to account for the additional burden of this optimal watermark pattern. Two decoding strategies, usually employed in modern CD decoders, have been examined. Simulations take emulated bursty background noise as it appears in user-handled discs into account. Variations in output error rates, depending on the decoder and the type of background noise became apparant. At low error rates {r < 0.003) the output symbol error rate for a bursty background differs by 20% depending on the decoder. Differences between a typical burst error distribution caused by user-handling and a non-burst error distribution has been found to be approximately 1% with the higher performing decoder. Simulation results show that the drop of the error-correction rates due to the presence of a watermark pattern quantitatively depends on the characteristic type of the background noise. A four times smaller change to the overall error rate was observed when adding a regular watermark pattern to a characteristic background noise, as caused by user-handling, compared to a non-bursty background

Multiple Track Performance of a Digital Magnetic Tape System : Experimental Study and Simulation using Parallel Processing Techniques

The primary aim of the magnetic recording industry is to increase storage capacities and transfer rates whilst maintaining or reducing costs. In multiple-track tape systems, as recorded track dimensions decrease, higher precision tape transport mechanisms and dedicated coding circuitry are required. This leads to increased manufacturing costs and a loss of flexibility. This thesis reports on the performance of a low precision low-cost multiple-track tape transport system. Software based techniques to study system performance, and to compensate for the mechanical deficiencies of this system were developed using occam and the transputer. The inherent parallelism of the multiple-track format was exploited by integrating a transputer into the recording channel to perform the signal processing tasks. An innovative model of the recording channel, written exclusively in occam, was developed. The effect of parameters, such as data rate, track dimensions and head misregistration on system performance was determined from the detailed error profile produced. This model may be run on a network of transputers, allowing its speed of execution to be scaled to suit the investigation. These features, combined with its modular flexibility makes it a powerful tool that may be applied to other multiple-track systems, such as digital HDTV. A greater understanding of the effects of mechanical deficiencies on the performance of multiple-track systems was gained from this study. This led to the development of a software based compensation scheme to reduce the effects of Lateral Head Displacement and allow low-cost tape transport mechanisms to be used with narrow, closely spaced tracks, facilitating higher packing densities. The experimental and simulated investigation of system performance, the development of the model and compensation scheme using parallel processing techniques has led to the publication of a paper and two further publications are expected.Thorn EMI, Central Research Laboratories, Hayes, Middlese

Development of an autonomous water sampler

EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Navigation/traffic control satellite mission study. Volume 3 - System concepts

Satellite network for air traffic control, solar flare warning, and collision avoidanc

Timing Signals and Radio Frequency Distribution Using Ethernet Networks for High Energy Physics Applications

Timing networks are used around the world in various applications from telecommunications systems to industrial processes, and from radio astronomy to high energy physics. Most timing networks are implemented using proprietary technologies at high operation and maintenance costs. This thesis presents a novel timing network capable of distributed timing with subnanosecond accuracy. The network, developed at CERN and codenamed “White- Rabbit”, uses a non-dedicated Ethernet link to distribute timing and data packets without infringing the sub-nanosecond timing accuracy required for high energy physics applications. The first part of this thesis proposes a new digital circuit capable of measuring time differences between two digital clock signals with sub-picosecond time resolution. The proposed digital circuit measures and compensates for the phase variations between the transmitted and received network clocks required to achieve the sub-nanosecond timing accuracy. Circuit design, implementation and performance verification are reported. The second part of this thesis investigates and proposes a new method to distribute radio frequency (RF) signals over Ethernet networks. The main goal of existing distributed RF schemes, such as Radio-Over-Fibre or Digitised Radio-Over-Fibre, is to increase the bandwidth capacity taking advantage of the higher performance of digital optical links. These schemes tend to employ dedicated and costly technologies, deemed unnecessary for applications with lower bandwidth requirements. This work proposes the distribution of RF signals over the “White-Rabbit” network, to convey phase and frequency information from a reference base node to a large numbers of remote nodes, thus achieving high performance and cost reduction of the timing network. Hence, this thesis reports the design and implementation of a new distributed RF system architecture; analysed and tested using a purpose-built simulation environment, with results used to optimise a new bespoke FPGA implementation. The performance is evaluated through phase-noise spectra, the Allan-Variance, and signalto- noise ratio measurements of the distributed signals