Towards Closing the Programmability-Efficiency Gap using Software-Defined Hardware

The past decade has seen the breakdown of two important trends in the computing industry: Moore’s law, an observation that the number of transistors in a chip roughly doubles every eighteen months, and Dennard scaling, that enabled the use of these transistors within a constant power budget. This has caused a surge in domain-specific accelerators, i.e. specialized hardware that deliver significantly better energy efficiency than general-purpose processors, such as CPUs. While the performance and efficiency of such accelerators are highly desirable, the fast pace of algorithmic innovation and non-recurring engineering costs have deterred their widespread use, since they are only programmable across a narrow set of applications. This has engendered a programmability-efficiency gap across contemporary platforms. A practical solution that can close this gap is thus lucrative and is likely to engender broad impact in both academic research and the industry. This dissertation proposes such a solution with a reconfigurable Software-Defined Hardware (SDH) system that morphs parts of the hardware on-the-fly to tailor to the requirements of each application phase. This system is designed to deliver near-accelerator-level efficiency across a broad set of applications, while retaining CPU-like programmability. The dissertation first presents a fixed-function solution to accelerate sparse matrix multiplication, which forms the basis of many applications in graph analytics and scientific computing. The solution consists of a tiled hardware architecture, co-designed with the outer product algorithm for Sparse Matrix-Matrix multiplication (SpMM), that uses on-chip memory reconfiguration to accelerate each phase of the algorithm. A proof-of-concept is then presented in the form of a prototyped 40 nm Complimentary Metal-Oxide Semiconductor (CMOS) chip that demonstrates energy efficiency and performance per die area improvements of 12.6x and 17.1x over a high-end CPU, and serves as a stepping stone towards a full SDH system. The next piece of the dissertation enhances the proposed hardware with reconfigurability of the dataflow and resource sharing modes, in order to extend acceleration support to a set of common parallelizable workloads. This reconfigurability lends the system the ability to cater to discrete data access and compute patterns, such as workloads with extensive data sharing and reuse, workloads with limited reuse and streaming access patterns, among others. Moreover, this system incorporates commercial cores and a prototyped software stack for CPU-level programmability. The proposed system is evaluated on a diverse set of compute-bound and memory-bound kernels that compose applications in the domains of graph analytics, machine learning, image and language processing. The evaluation shows average performance and energy-efficiency gains of 5.0x and 18.4x over the CPU. The final part of the dissertation proposes a runtime control framework that uses low-cost monitoring of hardware performance counters to predict the next best configuration and reconfigure the hardware, upon detecting a change in phase or nature of data within the application. In comparison to prior work, this contribution targets multicore CGRAs, uses low-overhead decision tree based predictive models, and incorporates reconfiguration cost-awareness into its policies. Compared to the best-average static (non-reconfiguring) configuration, the dynamically reconfigurable system achieves a 1.6x improvement in performance-per-Watt in the Energy-Efficient mode of operation, or the same performance with 23% lower energy in the Power-Performance mode, for SpMM across a suite of real-world inputs. The proposed reconfiguration mechanism itself outperforms the state-of-the-art approach for dynamic runtime control by up to 2.9x in terms of energy-efficiency.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/169859/1/subh_1.pd

On Improving Generalization of CNN-Based Image Classification with Delineation Maps Using the CORF Push-Pull Inhibition Operator

Deployed image classification pipelines are typically dependent on the images captured in real-world environments. This means that images might be affected by different sources of perturbations (e.g. sensor noise in low-light environments). The main challenge arises by the fact that image quality directly impacts the reliability and consistency of classification tasks. This challenge has, hence, attracted wide interest within the computer vision communities. We propose a transformation step that attempts to enhance the generalization ability of CNN models in the presence of unseen noise in the test set. Concretely, the delineation maps of given images are determined using the CORF push-pull inhibition operator. Such an operation transforms an input image into a space that is more robust to noise before being processed by a CNN. We evaluated our approach on the Fashion MNIST data set with an AlexNet model. It turned out that the proposed CORF-augmented pipeline achieved comparable results on noise-free images to those of a conventional AlexNet classification model without CORF delineation maps, but it consistently achieved significantly superior performance on test images perturbed with different levels of Gaussian and uniform noise

Abstracts on Radio Direction Finding (1899 - 1995)

The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion