1-D Coordinate Based on Local Information for MAC and Routing Issues in WSNs

More and more critical Wireless Sensor Networks (WSNs) applications are emerging. Those applications need reliability and respect of time constraints. The underlying mechanisms such as MAC and routing must handle such requirements. Our approach to the time constraint problem is to bound the hop-count between a node and the sink and the time it takes to do a hop so the end-to-end delay can be bounded and the communications are thus real-time. For reliability purpose we propose to select forwarder nodes depending on how they are connected in the direction of the sink. In order to be able to do so we need a coordinate (or a metric) that gives information on hop-count, that allows to strongly differentiate nodes and gives information on the connectivity of each node keeping in mind the intrinsic constraints of WSWs such as energy consumption, autonomy, etc. Due to the efficiency and scalability of greedy routing in WSNs and the financial cost of GPS chips, Virtual Coordinate Systems (VCSs) for WSNs have been proposed. A category of VCSs is based on the hop-count from the sink, this scheme leads to many nodes having the same coordinate. The main advantage of this system is that the hops number of a packet from a source to the sink is known. Nevertheless, it does not allow to differentiate the nodes with the same hop-count. In this report we propose a novel hop-count-based VCS which aims at classifying the nodes having the same hop-count depending on their connectivity and at differentiating nodes in a 2-hop neighborhood. Those properties make the coordinates, which also can be viewed as a local identifier, a very powerful metric which can be used in WSNs mechanisms.Comment: (2011

RTXP : A Localized Real-Time Mac-Routing Protocol for Wireless Sensor Networks

Protocols developed during the last years for Wireless Sensor Networks (WSNs) are mainly focused on energy efficiency and autonomous mechanisms (e.g. self-organization, self-configuration, etc). Nevertheless, with new WSN applications, appear new QoS requirements such as time constraints. Real-time applications require the packets to be delivered before a known time bound which depends on the application requirements. We particularly focus on applications which consist in alarms sent to the sink node. We propose Real-Time X-layer Protocol (RTXP), a real-time communication protocol. To the best of our knowledge, RTXP is the first MAC and routing real-time communication protocol that is not centralized, but instead relies only on local information. The solution is cross-layer (X-layer) because it allows to control the delays due to MAC and Routing layers interactions. RTXP uses a suited hop-count-based Virtual Coordinate System which allows deterministic medium access and forwarder selection. In this paper we describe the protocol mechanisms. We give theoretical bound on the end-to-end delay and the capacity of the protocol. Intensive simulation results confirm the theoretical predictions and allow to compare with a real-time centralized solution. RTXP is also simulated under harsh radio channel, in this case the radio link introduces probabilistic behavior. Nevertheless, we show that RTXP it performs better than a non-deterministic solution. It thus advocates for the usefulness of designing real-time (deterministic) protocols even for highly unreliable networks such as WSNs

Sidewinder: A Predictive Data Forwarding Protocol for Mobile Wireless Sensor Networks

Abstract—In-situ data collection for mobile wireless sensor network deployments has received little study, such as in the case of floating sensor networks for storm surge and innundation monitoring. We demonstrate through quantitative study that traditional approaches to routing in mobile environments do not work well due to volatile topology changes. Consequently, we propose Sidewinder, a predictive data forwarding protocol for mobile wireless sensor networks. Like a heat-seeking missile, data packets are guided towards a sink node with increasing accuracy as packets approach the sink. Different from conventional sensor network routing protocols, Sidewinder continuously predicts the current sink location based on distributed knowledge of sink mobility among nodes in a multi-hop routing process. More-over, the continuous sink estimation is scaled and adjusted to perform with resource-constrained wireless sensors. Our design is implemented with nesC and evaluated in TOSSIM. The per-formance evaluation demonstrates that Sidewinder significantly outperforms state-of-the-art solutions in packet delivery ratio, time delay, and energy efficiency. I

Розвиток алгоритмів маршрутизації в мобільних сенсорних мережах

Мета роботи – розвиток алгоритмів маршрутизації в мобільних сенсорних мережах. В даній роботі були визначені основні вимоги до побудови БСМ. Проаналізовані протоколи маршрутизації та було обрано оптимальну структуру мережі та обрано оптимальний метод маршрутизації при побудові безпровідної сенсорної мережі.The purpose of the work is the development of routing algorithms in mobile sensor networks. This work examines the basic requirements for the construction of BSM were identified. Routing protocols are analyzed and the optimal network structure is chosen and the optimal routing method is chosen when building a wireless sensor network

Virtual coordinate based techniques for wireless sensor networks: a simulation tool and localization & planarization algorithms

2013 Summer.Includes bibliographical references.Wireless sensor Networks (WSNs) are deployments of smart sensor devices for monitoring environmental or physical phenomena. These sensors have the ability to communicate with other sensors within communication range or with a base station. Each sensor, at a minimum, comprises of sensing, processing, transmission, and power units. This thesis focuses on virtual coordinate based techniques in WSNs. Virtual Coordinates (VCs) characterize each node in a network with the minimum hop distances to a set of anchor nodes, as its coordinates. It provides a compelling alternative to some of the localization applications such as routing. Building a WSN testbed is often infeasible and costly. Running real experiments on WSNs testbeds is time consuming, difficult and sometimes not feasible given the scope and size of applications. Simulation is, therefore, the most common approach for developing and testing new protocols and techniques for sensor networks. Though many general and wireless sensor network specific simulation tools are available, no available tool currently provides an intuitive interface or a tool for virtual coordinate based simulations. A simulator called VCSIM is presented which focuses specifically on Virtual Coordinate Space (VCS) in WSNs. With this simulator, a user can easily create WSNs networks of different sizes, shapes, and distributions. Its graphical user interface (GUI) facilitates placement of anchors and generation of VCs. Localization in WSNs is important for several reasons including identification and correlation of gathered data, node addressing, evaluation of nodes' density and coverage, geographic routing, object tracking, and other geographic algorithms. But due to many constraints, such as limited battery power, processing capabilities, hardware costs, and measurement errors, localization still remains a hard problem in WSNs. In certain applications, such as security sensors for intrusion detection, agriculture, land monitoring, and fire alarm sensors in a building, the sensor nodes are always deployed in an orderly fashion, in contrast to random deployments. In this thesis, a novel transformation is presented to obtain position of nodes from VCs in rectangular, hexagonal and triangular grid topologies. It is shown that with certain specific anchor placements, a location of a node can be accurately approximated, if the length of a shortest path in given topology between a node and anchors is equal to length of a shortest path in full topology (i.e. a topology without any voids) between the same node and anchors. These positions are obtained without the need of any extra localization hardware. The results show that more than 90% nodes were able to identify their position in randomly deployed networks of 80% and 85% node density. These positions can then be used for deterministic routing which seems to have better avg. path length compared to geographic routing scheme called "Greedy Perimeter Stateless Routing (GPSR)". In many real world applications, manual deployment is not possible in exact regular rectangular, triangular or hexagonal grids. Due to placement constraint, nodes are often placed with some deviation from ideal grid positions. Because of placement tolerance and due to non-isotropic radio patterns nodes may communicate with more or less number of neighbors than needed and may form cross-links causing non-planar topologies. Extracting planar graph from network topologies is known as network planarization. Network planarization has been an important technique in numerous sensor network protocols--such as GPSR for efficient routing, topology discovery, localization and data-centric storage. Most of the present planarization algorithms are based on location information. In this thesis, a novel network planarization algorithm is presented for rectangular, hexagonal and triangular topologies which do not use location information. The results presented in this thesis show that with placement errors of up to 30%, 45%, and 30% in rectangular, triangular and hexagonal topologies respectively we can obtain good planar topologies without the need of location information. It is also shown that with obtained planar topology more nodes acquire unique VCs

A scalable logical coordinates framework for routing in wireless sensor networks

In this paper, we present logical coordinates based routing (LCR), a novel framework for scalable and locationindependent routing in wireless sensor networks. LCR assigns each node a logical coordinate vector, and routes packets following these vectors. We demonstrate that LCR (i) guarantees packet delivery with a high probability, (ii) finds good paths, and (iii) exhibits robust performance in the presence of network voids and node failures. We systematically evaluate the performance of LCR through simulations and compare it with other state-of-the-art protocols. We also propose two extensions of LCR, one for three-dimensional node deployments and the other for unreliable wireless links