38,495 research outputs found
A bibliography on parallel and vector numerical algorithms
This is a bibliography of numerical methods. It also includes a number of other references on machine architecture, programming language, and other topics of interest to scientific computing. Certain conference proceedings and anthologies which have been published in book form are listed also
Generalized dynamic engine simulation techniques for the digital computer
Recently advanced simulation techniques have been developed for the digital computer and used as the basis for development of a generalized dynamic engine simulation computer program, called DYNGEN. This computer program can analyze the steady state and dynamic performance of many kinds of aircraft gas turbine engines. Without changes to the basic program DYNGEN can analyze one- or two-spool turbofan engines. The user must supply appropriate component performance maps and design-point information. Examples are presented to illustrate the capabilities of DYNGEN in the steady state and dynamic modes of operation. The analytical techniques used in DYNGEN are briefly discussed, and its accuracy is compared with a comparable simulation using the hybrid computer. The impact of DYNGEN and similar all-digital programs on future engine simulation philosophy is also discussed
Bibliography and summary of methods related to the error analysis of hybrid computers technical note no. 4
Bibliography and summary of methods used in error analysis of hybrid computer
Solution of partial differential equations on vector and parallel computers
The present status of numerical methods for partial differential equations on vector and parallel computers was reviewed. The relevant aspects of these computers are discussed and a brief review of their development is included, with particular attention paid to those characteristics that influence algorithm selection. Both direct and iterative methods are given for elliptic equations as well as explicit and implicit methods for initial boundary value problems. The intent is to point out attractive methods as well as areas where this class of computer architecture cannot be fully utilized because of either hardware restrictions or the lack of adequate algorithms. Application areas utilizing these computers are briefly discussed
Simple digital quantum algorithm for symmetric first order linear hyperbolic systems
This paper is devoted to the derivation of a digital quantum algorithm for
the Cauchy problem for symmetric first order linear hyperbolic systems, thanks
to the reservoir technique. The reservoir technique is a method designed to
avoid artificial diffusion generated by first order finite volume methods
approximating hyperbolic systems of conservation laws. For some class of
hyperbolic systems, namely those with constant matrices in several dimensions,
we show that the combination of i) the reservoir method and ii) the alternate
direction iteration operator splitting approximation, allows for the derivation
of algorithms only based on simple unitary transformations, thus perfectly
suitable for an implementation on a quantum computer. The same approach can
also be adapted to scalar one-dimensional systems with non-constant velocity by
combining with a non-uniform mesh. The asymptotic computational complexity for
the time evolution is determined and it is demonstrated that the quantum
algorithm is more efficient than the classical version. However, in the quantum
case, the solution is encoded in probability amplitudes of the quantum
register. As a consequence, as with other similar quantum algorithms, a
post-processing mechanism has to be used to obtain general properties of the
solution because a direct reading cannot be performed as efficiently as the
time evolution.Comment: 28 pages, 12 figures, major rewriting of the section describing the
numerical method, simplified the presentation and notation, reorganized the
sections, comments are welcome
Numerical Analysis
Acknowledgements: This article will appear in the forthcoming Princeton Companion to Mathematics, edited by Timothy Gowers with June Barrow-Green, to be published by Princeton University Press.\ud
\ud
In preparing this essay I have benefitted from the advice of many colleagues who corrected a number of errors of fact and emphasis. I have not always followed their advice, however, preferring as one friend put it, to "put my head above the parapet". So I must take full responsibility for errors and omissions here.\ud
\ud
With thanks to: Aurelio Arranz, Alexander Barnett, Carl de Boor, David Bindel, Jean-Marc Blanc, Mike Bochev, Folkmar Bornemann, Richard Brent, Martin Campbell-Kelly, Sam Clark, Tim Davis, Iain Duff, Stan Eisenstat, Don Estep, Janice Giudice, Gene Golub, Nick Gould, Tim Gowers, Anne Greenbaum, Leslie Greengard, Martin Gutknecht, Raphael Hauser, Des Higham, Nick Higham, Ilse Ipsen, Arieh Iserles, David Kincaid, Louis Komzsik, David Knezevic, Dirk Laurie, Randy LeVeque, Bill Morton, John C Nash, Michael Overton, Yoshio Oyanagi, Beresford Parlett, Linda Petzold, Bill Phillips, Mike Powell, Alex Prideaux, Siegfried Rump, Thomas Schmelzer, Thomas Sonar, Hans Stetter, Gil Strang, Endre Süli, Defeng Sun, Mike Sussman, Daniel Szyld, Garry Tee, Dmitry Vasilyev, Andy Wathen, Margaret Wright and Steve Wright
Numerical Digital Computer Method for Determining the Transient Responses of Nonlinear Automatic Systems Based on Calculation of the Convolution Integral
Numerical digital computer method for determining transient responses of nonlinear automatic systems based on calculation of convolution integra
Numerical simulation of the stress-strain state of the dental system
We present mathematical models, computational algorithms and software, which
can be used for prediction of results of prosthetic treatment. More interest
issue is biomechanics of the periodontal complex because any prosthesis is
accompanied by a risk of overloading the supporting elements. Such risk can be
avoided by the proper load distribution and prediction of stresses that occur
during the use of dentures. We developed the mathematical model of the
periodontal complex and its software implementation. This model is based on
linear elasticity theory and allows to calculate the stress and strain fields
in periodontal ligament and jawbone. The input parameters for the developed
model can be divided into two groups. The first group of parameters describes
the mechanical properties of periodontal ligament, teeth and jawbone (for
example, elasticity of periodontal ligament etc.). The second group
characterized the geometric properties of objects: the size of the teeth, their
spatial coordinates, the size of periodontal ligament etc. The mechanical
properties are the same for almost all, but the input of geometrical data is
complicated because of their individual characteristics. In this connection, we
develop algorithms and software for processing of images obtained by computed
tomography (CT) scanner and for constructing individual digital model of the
tooth-periodontal ligament-jawbone system of the patient. Integration of models
and algorithms described allows to carry out biomechanical analysis on
three-dimensional digital model and to select prosthesis design.Comment: 19 pages, 9 figure
NASA Thesaurus Supplement: A three part cumulative supplement to the 1982 edition of the NASA Thesaurus (supplement 2)
The three part cumulative NASA Thesaurus Supplement to the 1982 edition of the NASA Thesaurus includes: part 1, hierarchical listing; part 2, access vocabulary, and part 3, deletions. The semiannual supplement gives complete hierarchies for new terms and includes new term indications for terms new to this supplement
- …