Optimizing Indoor Location Based Tracking through Proper Filter Selection and Wireless Sensor Network Design

Indoor positioning system (IPS) is a topic that is coming up more and more for various reasons, such as allowing companies to track important objects using radio frequency identification (RFID) and employees with Bluetooth devices inside a facility. Geofencing is one of the biggest topics with IPS and is meant to limit access to a network in specified areas. Devices that incorporate indoor tracking are not initially precise when objects and employees are on the move. This movement requires devices to have a reliable filter for noise and package lose. For this paper, the comparison between extended Kalman filters and unscented Kalman filter in a controlled environment will help indicate which is ideal for IPS tracking. Both filters will be applied and compared on location accuracy metrics. The proper design of the wireless network is also crucial for having an effective IPS method. This will show the difference in wireless networks and how the initial design will lead to greater chance of success for IPS

Wireless indoor localisation within the 5G internet of radio light

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonNumerous applications can be enhanced by accurate and efficient indoor localisation using wireless sensor networks, however trade-offs often exist between these two parameters. In this thesis, realworld and simulation data is used to examine the hybrid millimeter wave and Visible Light Communications (VLC) architecture of the 5G Internet of Radio Light (IoRL) Horizon 2020 project. Consequently, relevant localisation challenges within Visible Light Positioning (VLP) and asynchronous sampling networks are identified, and more accurate and efficient solutions are developed. Currently, VLP relies strongly on the assumed Lambertian properties of light sources. However, in practice, not all lights are Lambertian. To support the widespread deployment of VLC technology in numerous environments, measurements from non-Lambertian sources are analysed to provide new insights into the limitations of existing VLP techniques. Subsequently, a novel VLP calibration technique is proposed, and results indicate a 59% accuracy improvement against existing methods. This solution enables high accuracy centimetre level VLP to be achieved with non- Lambertian sources. Asynchronous sampling of range-based measurements is known to impact localisation performance negatively. Various Asynchronous Sampling Localisation Techniques (ASLT) exist to mitigate these effects. While effective at improving positioning performance, the exact suitability of such solutions is not evident due to their additional processes, subsequent complexity, and increased costs. As such, extensive simulations are conducted to study the effectiveness of ASLT under variable sampling latencies, sensor measurement noise, and target trajectories. Findings highlight the computational demand of existing ASLT and motivate the development of a novel solution. The proposed Kalman Extrapolated Least Squares (KELS) method achieves optimal localisation performance with a significant energy reduction of over 50% when compared to current leading ASLT. The work in this thesis demonstrates both the capability for high performance VLP from non- Lambertian sources as well as the potential for energy efficient localisation for sequentially sampled range measurements.Horizon 202

Technologies to improve the performance of wireless sensor networks in high-traffic applications

The expansion of wireless sensor networks to advanced areas, including structure health monitoring, multimedia surveillance, and health care monitoring applications, has resulted in new and complex problems. Traditional sensor systems are designed and optimised for extremely low traffic loads. However, it has been witnessed that network performance drops rapidly with the higher traffic loads common in advanced applications. In this thesis, we examine the system characteristics and new system requirements of these advanced sensor network applications. Based on this analysis, we propose an improved architecture for wireless sensor systems to increase the network performance while maintaining compatibility with the essential WSN requirements: low power, low cost, and distributed scalability. We propose a modified architecture deriving from the IEEE 802.15.4 standard, which is shown to significantly increase the network performance in applications generating increased data loads. This is achieved by introducing the possibility of independently allocating the sub-carriers in a distributed manner. As a result, the overall efficiency of the channel contention mechanism will be increased to deliver higher throughput with lower energy consumption. Additionally, we develop the concept of increasing the data transmission efficiency by adapting the spreading code length to the wireless environment. Such a modification will not only be able to deliver higher throughput but also maintain a reliable wireless link in the harsh RF environment. Finally, we propose the use of the battery recovery effect to increase the power efficiency of the system under heavy traffic load conditions. These three innovations minimise the contention window period while maximising the capacity of the available channel, which is shown to increase network performance in terms of energy efficiency, throughput and latency. The proposed system is shown to be backwards compatible and able to satisfy both traditional and advanced applications and is particularly suitable for deployment in harsh RF environments. Experiments and analytic techniques have been described and developed to produce performance metrics for all the proposed techniques

Development and Experimental Analysis of Wireless High Accuracy Ultra-Wideband Localization Systems for Indoor Medical Applications

This dissertation addresses several interesting and relevant problems in the field of wireless technologies applied to medical applications and specifically problems related to ultra-wideband high accuracy localization for use in the operating room. This research is cross disciplinary in nature and fundamentally builds upon microwave engineering, software engineering, systems engineering, and biomedical engineering. A good portion of this work has been published in peer reviewed microwave engineering and biomedical engineering conferences and journals. Wireless technologies in medicine are discussed with focus on ultra-wideband positioning in orthopedic surgical navigation. Characterization of the operating room as a medium for ultra-wideband signal transmission helps define system design requirements. A discussion of the first generation positioning system provides a context for understanding the overall system architecture of the second generation ultra-wideband positioning system outlined in this dissertation. A system-level simulation framework provides a method for rapid prototyping of ultra-wideband positioning systems which takes into account all facets of the system (analog, digital, channel, experimental setup). This provides a robust framework for optimizing overall system design in realistic propagation environments. A practical approach is taken to outline the development of the second generation ultra-wideband positioning system which includes an integrated tag design and real-time dynamic tracking of multiple tags. The tag and receiver designs are outlined as well as receiver-side digital signal processing, system-level design support for multi-tag tracking, and potential error sources observed in dynamic experiments including phase center error, clock jitter and drift, and geometric position dilution of precision. An experimental analysis of the multi-tag positioning system provides insight into overall system performance including the main sources of error. A five base station experiment shows the potential of redundant base stations in improving overall dynamic accuracy. Finally, the system performance in low signal-to-noise ratio and non-line-of-sight environments is analyzed by focusing on receiver-side digitally-implemented ranging algorithms including leading-edge detection and peak detection. These technologies are aimed at use in next-generation medical systems with many applications including surgical navigation, wireless telemetry, medical asset tracking, and in vivo wireless sensors

Computational Intelligence for Cooperative Swarm Control

Over the last few decades, swarm intelligence (SI) has shown significant benefits in many practical applications. Real-world applications of swarm intelligence include disaster response and wildlife conservation. Swarm robots can collaborate to search for survivors, locate victims, and assess damage in hazardous environments during an earthquake or natural disaster. They can coordinate their movements and share data in real-time to increase their efficiency and effectiveness while guiding the survivors. In addition to tracking animal movements and behaviour, robots can guide animals to or away from specific areas. Sheep herding is a significant source of income in Australia that could be significantly enhanced if the human shepherd could be supported by single or multiple robots. Although the shepherding framework has become a popular SI mechanism, where a leading agent (sheepdog) controls a swarm of agents (sheep) to complete a task, controlling a swarm of agents is still not a trivial task, especially in the presence of some practical constraints. For example, most of the existing shepherding literature assumes that each swarm member has an unlimited sensing range to recognise all other members’ locations. However, this is not practical for physical systems. In addition, current approaches do not consider shepherding as a distributed system where an agent, namely a central unit, may observe the environment and commu- nicate with the shepherd to guide the swarm. However, this brings another hurdle when noisy communication channels between the central unit and the shepherd af- fect the success of the mission. Also, the literature lacks shepherding models that can cope with dynamic communication systems. Therefore, this thesis aims to design a multi-agent learning system for effective shepherding control systems in a partially observable environment under communication constraints. To achieve this goal, the thesis first introduces a new methodology to guide agents whose sensing range is limited. In this thesis, the sheep are modelled as an induced network to represent the sheep’s sensing range and propose a geometric method for finding a shepherd-impacted subset of sheep. The proposed swarm optimal herding point uses a particle swarm optimiser and a clustering mechanism to find the sheepdog’s near-optimal herding location while considering flock cohesion. Then, an improved version of the algorithm (named swarm optimal modified centroid push) is proposed to estimate the sheepdog’s intermediate waypoints to the herding point considering the sheep cohesion. The approaches outperform existing shepherding methods in reducing task time and increasing the success rate for herding. Next, to improve shepherding in noisy communication channels, this thesis pro- poses a collaborative learning-based method to enhance communication between the central unit and the herding agent. The proposed independent pre-training collab- orative learning technique decreases the transmission mean square error by half in 10% of the training time compared to existing approaches. The algorithm is then ex- tended so that the sheepdog can read the modulated herding points from the central unit. The results demonstrate the efficiency of the new technique in time-varying noisy channels. Finally, the central unit is modelled as a mobile agent to lower the time-varying noise caused by the sheepdog’s motion during the task. So, I propose a Q-learning- based incremental search to increase transmission success between the shepherd and the central unit. In addition, two unique reward functions are presented to ensure swarm guidance success with minimal energy consumption. The results demonstrate an increase in the success rate for shepherding

Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions

Design and theoretical analysis of advanced power based positioning in RF system

Accurate locating and tracking of people and resources has become a fundamental requirement for many applications. The global navigation satellite systems (GNSS) is widely used. But its accuracy suffers from signal obstruction by buildings, multipath fading, and disruption due to jamming and spoof. Hence, it is required to supplement GPS with inertial sensors and indoor localization schemes that make use of WiFi APs or beacon nodes. In the GPS-challenging or fault scenario, radio-frequency (RF) infrastructure based localization schemes can be a fallback solution for robust navigation. For the indoor/outdoor transition scenario, we propose hypothesis test based fusion method to integrate multi-modal localization sensors. In the first paper, a ubiquitous tracking using motion and location sensor (UTMLS) is proposed. As a fallback approach, power-based schemes are cost-effective when compared with the existing ToA or AoA schemes. However, traditional power-based positioning methods suffer from low accuracy and are vulnerable to environmental fading. Also, the expected accuracy of power-based localization is not well understood but is needed to derive the hypothesis test for the fusion scheme. Hence, in paper 2-5, we focus on developing more accurate power-based localization schemes. The second paper improves the power-based range estimation accuracy by estimating the LoS component. The ranging error model in fading channel is derived. The third paper introduces the LoS-based positioning method with corresponding theoretical limits and error models. In the fourth and fifth paper, a novel antenna radiation-pattern-aware power-based positioning (ARPAP) system and power contour circle fitting (PCCF) algorithm are proposed to address antenna directivity effect on power-based localization. Overall, a complete LoS signal power based positioning system has been developed that can be included in the fusion scheme --Abstract, page iv

New Approach of Indoor and Outdoor Localization Systems

Accurate determination of the mobile position constitutes the basis of many new applications. This book provides a detailed account of wireless systems for positioning, signal processing, radio localization techniques (Time Difference Of Arrival), performances evaluation, and localization applications. The first section is dedicated to Satellite systems for positioning like GPS, GNSS. The second section addresses the localization applications using the wireless sensor networks. Some techniques are introduced for localization systems, especially for indoor positioning, such as Ultra Wide Band (UWB), WIFI. The last section is dedicated to Coupled GPS and other sensors. Some results of simulations, implementation and tests are given to help readers grasp the presented techniques. This is an ideal book for students, PhD students, academics and engineers in the field of Communication, localization & Signal Processing, especially in indoor and outdoor localization domains