Magneto-Electric Dipole Antenna Arrays

A planar magneto-electric (ME) dipole antenna array is proposed and demonstrated by both full-wave analysis and experiments. The proposed structure leverages the infinite wavelength propagation characteristic of composite right/left-handed (CRLH) transmission lines to form high-gain magnetic radiators combined with radial conventional electric radiators, where the overall structure is excited by a single differential feed. The traveling-wave type nature of the proposed ME-dipole antenna enables the formation of directive arrays with high-gain characteristics and scanning capability. Peak gains of 10.84 dB and 5.73 dB are demonstrated for the electric dipole and magnetic-dipole radiation components, respectively.Comment: 9 pages, 17 figure

Novel Pseudo Magneto-electric Dipole Antennas

One of the major requirements for modern wireless communications is very high data transmission, so antennas with simple geometry, wide operation bandwidth and stable high gain features are in increasing demand. In this thesis, three novel pseudo magneto-electric (ME) dipole antennas operating in 5G Frequency Range 1 (FR1) sub-6GHz and Frequency Range 2 (FR2) millimeter-wave (mmW) band are introduced and analyzed. Comparing with conventional ME dipole antennas, which always require a vertical quarter-wave cavity to generate the magnetic dipole resonance, the pseudo-ME dipole designs proposed in this thesis do not rely on the cavity to provide the complementary magnetic dipole mode, therefore, they have extremely simple geometry. Meanwhile, it achieved wide bandwidth (50.30%) and high gain (average 8.74 dBi) the in-band gain variation is only ± 1dB. Based on the novel cavity-less Pseudo-ME dipole antenna geometry, a wide axial ratio bandwidth (54.1%) circularly polarized pseudo-ME dipole antenna is also designed to overcome the polarization misalignment problem in multipath-rich wireless environments, this antenna has two pairs of orthogonal electric dipoles and magnetic dipoles to achieve the wide axial ratio bandwidth performance. Finally, an aperture-coupled printed pseudo-ME dipole antenna is designed for operating in millimeter-wave band, it has 32.3% of impedance bandwidth and stable high gain 7.4 ± 0.8 dBi. Especially, there is none typical via-hole formed cavity in the geometry, so the fabrication of the mmW band antenna becomes simpler

A Simple Low-Profile Coaxially-Fed Magneto-Electric Dipole Antenna Without Slot-Cavity

A simple coaxially-fed magneto-electric dipole (ME dipole) antenna is designed and experimentally evaluated. The proposed antenna does not require the conventional quarter-wavelength slot cavity for generating the magnetic dipole mode, and only consists of two simple rectangular horizontal patches, a vertical semi-rigid coaxial cable and a square ground plane. It makes the fabrication easier and can reduce the production cost. Also, as the quarter-wavelength slot cavity is removed in the proposed design, the thickness of the antenna can be reduced to 21 mm, i.e., 16.4% of the free space wavelength at the center frequency. The low-profile antenna shows comparable wide impedance bandwidth of 41.03% (S11 ≤ −10 dB), and a more stable and higher realized gain from 7.90 - 9.74 dBi (± 0.92 dB variation) over the operating frequency band from 1.86 GHz to 2.82 GHz (centered at 2.34 GHz). The maximum gain has increased around 9.4% when compare with that of the highest reported. While the gain variation in the passband of the proposed antenna is about 58% lower than that of those ME dipole antennas reported in the literature. The radiation mechanism and the effects of the critical parameters of the antenna are also explained with the assistance of the parametric study presented

An Overview of Magneto-Electric Dipole Antenna Feed Design

In this paper , an overview of various feed design techniques of Magneto- Electric dipole antenna has been analyzed and stated. Also it has been observed that with change in feeding design , the impedance bandwidth also varies. Different feeding pattern can change the impedance bandwidth from 25.5% to 114%, with stable gain and radiation pattern

A Single-Fed Wideband Circularly Polarized Cross-Fed Cavity-less Magneto-Electric Dipole Antenna

In this paper, we proposed a new wideband circularly polarized cross-fed magneto-electric dipole antenna. Different from conventional cross-dipole or magneto-electric dipole antennas, the proposed simple geometry realizes a pair of complementary magnetic dipole modes by utilizing the two open slots formed between the four cross-fed microstrip patches for achieving circular polarization and high stable gain across a wide frequency band. No parasitic elements are required for extending the bandwidths; therefore, both the radiation patterns and in-band gain are stable. The simulated field distributions demonstrated the phase complementarity of the two pairs of magnetic and electric dipole modes. A parametric study was also performed to demonstrate the radiation mechanism between the electric and magnetic dipole modes. The radiating elements are realized on a piece of double-sided dielectric substrate fed and mechanically supported by a low-cost commercial semirigid cable. The overall thickness of the antenna is about 0.22λo at the center frequency of axial ratio bandwidth. The measured results show a wide impedance bandwidth (|S11| < −10 dB) of 70.2% from 2.45 to 5.10 GHz. The in-band 3-dB axial ratio bandwidth is 51.5% from 3.0 to 5.08 GHz. More importantly, the gain of the antenna is 9.25 ± 0.56 dBic across the 3-dB axial ratio bandwidth

Dual-linearly polarized, electrically small, low-profile, broadside radiating, huygens dipole antenna

© 1963-2012 IEEE. A dual-linearly polarized, electrically small, low-profile, broadside radiating Huygens dipole antenna is presented, that is, an advanced combination of electric and magnetic near-field resonant parasitic elements. Its prototype was fabricated and tested. The measured results are in good agreement with their simulated values. At 1.515 GHz, the prototype is electrically small ( ka = 0.904 ) and low profile ( 0.0483\lambda -{0} ). It exhibits high port isolation and a large front-to-back ratio (FTBR). The isolation between its two ports is demonstrated to be over 25.8 dB within its -10 dB fractional impedance bandwidth, 0.46%. When port 1 (port 2) is excited, the peak realized gain is 2.03 dBi (2.15 dBi) strictly along the broadside direction with a 12.4 dB (12.1 dB) FTBR

Millimeter-Wave Components and Antennas for Spatial and Polarization Diversity using PRGW Technology

The evolution of the wireless communication systems to the future generation is accompanied by a huge improvement in the system performance through providing a high data rate with low latency. These systems require access to millimeter wave (mmWave) bands, which offer several advantages such as physically smaller components and much wider bandwidthcomparedtomicrowavefrequencies. However, mmWavecomponentsstillneed a significant improvement to follow the rapid variations in future technologies. Although mmWave frequencies can carry more data, they are limited in terms of their penetration capabilities and their coverage range. Moreover, these frequencies avoid deploying traditional guiding technologies such as microstrip lines due to high radiation and material losses. Hence, utilizing new guiding structure techniques such as Printed Ridge Gap Waveguide (PRGW) is essential in future mmWave systems implementation. ThemainpurposeofthisthesisistodesignmmWavecomponents,antennasubsystems and utilize both in beam switching systems. The major mmWave components addressed in this thesis are hybrid coupler, crossover, and differential power divider where the host guidingstructureisthePRGW.Inaddition,variousdesignsfordifferentialfeedingPRGW antennas and antenna arrays are presented featuring wide bandwidth and high gain in mmWave band. Moreover, the integration of both the proposed components and the featured antennas is introduced. This can be considered as a significant step toward the requirements fulfillment of today's advanced communication systems enabling both space and polarization diversity. The proposed components are designed to meet the future ever-increasing consumer experience and technical requirements such as low loss, compact size, and low-cost fabrication. This directed the presented research to have a contribution into three major parts. The first part highlights the feeding structures, where mmWave PRGW directional couplers and differential feeding power divider are designed and validated. These components are among the most important passive elements of microwave circuits used in antennabeam-switchingnetworks. Different3-dBquadraturehybridcouplersandcrossover prototypes are proposed, featured with a compact size and a wide bandwidth beyond 10 % at 30 GHz. In the second part, a beam switching network implemented using hybrid couplers is presented. The proposed beam switching network is a 4 × 4 PRGW Butler matrix that used to feed a Magneto-electric (ME) dipole antenna array. As a result, a 2-D scanning antenna array with a compact size, wide bandwidth, and high radiation efficiency larger than84%isachieved. Furthergainenhancementof5dBiisachievedthroughdeployinga hybridgainenhancementtechniqueincludingAMCmushroomshapesaroundtheantenna array with a dielectric superstrate located in the broadside direction. The proposed scanning antenna array can be considered as a step toward the desired improvement in the data rate and coverage through enabling the space diversity for the communication link. The final activity is related to the development of high-gain wide-band mmWave antenna arrays for potential use in future mmWave applications. The first proposed configuration is a differential feeding circular polarized aperture antenna array implemented with PRGW technology. Differential feeding antenna designs offer more advantages than single- ended antennas for mmWave communications as they are easy to be integrated with differential mmWave monolithic ICs that have high common-mode rejection ratio providing an immunity of the environmental noise. The proposed differential feeding antenna array is designed and fabricated, which featured with a stable high gain and a high radiation efficiency over a wide bandwidth. Another proposed configuration is a dualpolarized ME-dipole PRGW antenna array for mmWave wireless communication. Dual polarizationisconsideredoneofthemostimportantantennasolutionsthatcansavecosts and space for modern communication systems. In addition, it is an effective strategy for multiple-input and multiple-output systems that can reduce the size of multiple antennas systems by utilizing extra orthogonal polarization. The proposed dual- polarized antenna array is designed to achieve a stable gain of 15 ± 1 dBi with low cross- polarization less than -30 dB over a wide frequency range of 20 % at 30 GHz

Antenna Designs Aiming at the Next Generation of Wireless Communication

Millimeter-wave (mm-wave) frequencies have drawn large attention, specically for the fifth generation (5G) of wireless communication, due to their capability to provide high data-rates. However, design and characterization of the antenna system in wireless communication will face new challenges when we move up to higher frequency bands. The small size of the components at higher frequencies will make the integration of the antennas in the system almost inevitable. Therefore, the individual characterization of the antenna can become more challenging compared to the previous generations.This emphasizes the importance of having a reliable, simple and yet meaningful Over-the-Air (OTA) characterization method for the antenna systems. To avoid the complexity of using a variety of propagation environments in the OTA performance characterization, two extreme or edge scenarios for the propagation channels are presented, i.e., the Rich Isotropic Multipath (RIMP) and Random Line-of-Sight (Random-LoS). MIMO efficiency has been defined as a Figure of Merit (FoM), based on the Cumulative Distribution Function (CDF) of the received signal, due to the statistical behavior of the signal in both RIMP and Random-LoS. Considering this approach, we have improved the design of a wideband antenna for wireless application based on MIMO efficiency as the FoM of the OTA characterization in a Random-LoS propagation environment. We have shown that the power imbalance and the polarization orthogonality plays major roles determining the 2-bitstream MIMO performance of the antenna in Random-LoS. In addition, a wideband dual-polarized linear array is designed for an OTA Random-LoS measurement set-up for automotive wireless systems. The next generation of wireless communications is extended throughout multiple narrow frequency bands, varying within 20-70 GHz. Providing an individual antenna system for each of these bands may not be feasible in terms of cost, complexity and available physical space. Therefore, Ultra-Wideband (UWB) antenna arrays, coveringmultiple mm-wave frequency bands represent a versatile candidate for these antenna systems. In addition to having wideband characteristics, these antennas should offer an easy integration capability with the active modules. We present a new design of UWB planar arrays for mm-wave applications. The novelty is to propose planar antenna layouts to provide large bandwidth at mm-wave frequencies, using simplified standard PCB manufacturing techniques. The proposed antennas are based on Tightly Coupled Dipole Arrays (TCDAs) concept with integrated feeding network