9,911 research outputs found
Physical layer issues and cross-layer design in wireless networks
Comparing to wired networks, wireless networks have some special features in the physical layer, medium access control (MAC) layer, and the network layer. This work discusses several research topics in the physical layer, and studies the cross-layer design of wireless networks.
First, we consider a Code-division multiple-access (CDMA) system with multiuser detection when the presence of a subset of the users is unknown to the receiver. The performance of the system in terms of Signal-to-Interference and noise-Ratio (SIR) and user capacity is given, by assuming symmetric signals. Then, we study the power control problem with multiple flow types. Each node has multiple flow types requiring different QoS, (for example in a multimedia system,) and has the constraint of using the same power level for all of the flow types. The conditions for solution to exist are given; and the characteristics of the solution are provided. Next, we propose a passive rate adaptation, in which some bits are dropped at the receiver end of a link, for the ad hoc network to use in the temporary channel fluctuation. We study the performance of this passive rate control scheme in terms of both symbol error probability and mean square distortion.
Finally, we study the coupling between layers of the network structure, and the cross-layer design. We explore the coupling between the physical layer and the MAC sublayer first, and propose the scheduling algorithm with power control. Then we consider the coupling between MAC sublayer and the network layer, and propose the joint scheduling and routing algorithm. The simulation results demonstrate that the joint algorithm improves the performance significantly
Cross-layer Congestion Control, Routing and Scheduling Design in Ad Hoc Wireless Networks
This paper considers jointly optimal design of crosslayer congestion control, routing and scheduling for ad hoc
wireless networks. We first formulate the rate constraint and scheduling constraint using multicommodity flow variables, and formulate resource allocation in networks with fixed wireless channels (or single-rate wireless devices that can mask channel variations) as a utility maximization problem with these constraints.
By dual decomposition, the resource allocation problem
naturally decomposes into three subproblems: congestion control,
routing and scheduling that interact through congestion price.
The global convergence property of this algorithm is proved. We
next extend the dual algorithm to handle networks with timevarying
channels and adaptive multi-rate devices. The stability
of the resulting system is established, and its performance is
characterized with respect to an ideal reference system which
has the best feasible rate region at link layer.
We then generalize the aforementioned results to a general
model of queueing network served by a set of interdependent
parallel servers with time-varying service capabilities, which
models many design problems in communication networks. We
show that for a general convex optimization problem where a
subset of variables lie in a polytope and the rest in a convex set,
the dual-based algorithm remains stable and optimal when the
constraint set is modulated by an irreducible finite-state Markov
chain. This paper thus presents a step toward a systematic way
to carry out cross-layer design in the framework of “layering as
optimization decomposition” for time-varying channel models
On Energy Efficient Hierarchical Cross-Layer Design: Joint Power Control and Routing for Ad Hoc Networks
In this paper, a hierarchical cross-layer design approach is proposed to
increase energy efficiency in ad hoc networks through joint adaptation of
nodes' transmitting powers and route selection. The design maintains the
advantages of the classic OSI model, while accounting for the cross-coupling
between layers, through information sharing. The proposed joint power control
and routing algorithm is shown to increase significantly the overall energy
efficiency of the network, at the expense of a moderate increase in complexity.
Performance enhancement of the joint design using multiuser detection is also
investigated, and it is shown that the use of multiuser detection can increase
the capacity of the ad hoc network significantly for a given level of energy
consumption.Comment: To appear in the EURASIP Journal on Wireless Communications and
Networking, Special Issue on Wireless Mobile Ad Hoc Network
Towards Optimal Distributed Node Scheduling in a Multihop Wireless Network through Local Voting
In a multihop wireless network, it is crucial but challenging to schedule
transmissions in an efficient and fair manner. In this paper, a novel
distributed node scheduling algorithm, called Local Voting, is proposed. This
algorithm tries to semi-equalize the load (defined as the ratio of the queue
length over the number of allocated slots) through slot reallocation based on
local information exchange. The algorithm stems from the finding that the
shortest delivery time or delay is obtained when the load is semi-equalized
throughout the network. In addition, we prove that, with Local Voting, the
network system converges asymptotically towards the optimal scheduling.
Moreover, through extensive simulations, the performance of Local Voting is
further investigated in comparison with several representative scheduling
algorithms from the literature. Simulation results show that the proposed
algorithm achieves better performance than the other distributed algorithms in
terms of average delay, maximum delay, and fairness. Despite being distributed,
the performance of Local Voting is also found to be very close to a centralized
algorithm that is deemed to have the optimal performance
Interference-Aware Scheduling for Connectivity in MIMO Ad Hoc Multicast Networks
We consider a multicast scenario involving an ad hoc network of co-channel
MIMO nodes in which a source node attempts to share a streaming message with
all nodes in the network via some pre-defined multi-hop routing tree. The
message is assumed to be broken down into packets, and the transmission is
conducted over multiple frames. Each frame is divided into time slots, and each
link in the routing tree is assigned one time slot in which to transmit its
current packet. We present an algorithm for determining the number of time
slots and the scheduling of the links in these time slots in order to optimize
the connectivity of the network, which we define to be the probability that all
links can achieve the required throughput. In addition to time multiplexing,
the MIMO nodes also employ beamforming to manage interference when links are
simultaneously active, and the beamformers are designed with the maximum
connectivity metric in mind. The effects of outdated channel state information
(CSI) are taken into account in both the scheduling and the beamforming
designs. We also derive bounds on the network connectivity and sum transmit
power in order to illustrate the impact of interference on network performance.
Our simulation results demonstrate that the choice of the number of time slots
is critical in optimizing network performance, and illustrate the significant
advantage provided by multiple antennas in improving network connectivity.Comment: 34 pages, 12 figures, accepted by IEEE Transactions on Vehicular
Technology, Dec. 201
- …