A Novel VLSI Design On CSKA Of Binary Tree Adder With Compaq Area And High Throughput

Addition is one of the most basic operations performed in all computing units, including microprocessors and digital signal processors. It is also a basic unit utilized in various complicated algorithms of multiplication and division. Efficient implementation of an adder circuit usually revolves around reducing the cost to propagate the carry between successive bit positions. Multi-operand adders are important arithmetic design blocks especially in the addition of partial products of hardware multipliers. The multi-operand adders (MOAs) are widely used in the modern low-power and high-speed portable very-large-scale integration systems for image and signal processing applications such as digital filters, transforms, convolution neural network architecture. Hence, a new high-speed and area efficient adder architecture is proposed using pre-compute bitwise addition followed by carry prefix computation logic to perform the three-operand binary addition that consumes substantially less area, low power and drastically reduces the adder delay. Further, this project is enhanced by using Modified carry bypass adder to further reduce more density and latency constraints. Modified carry skip adder introduces simple and low complex carry skip logic to reduce parameters constraints. In this proposal work, designed binary tree adder (BTA) is analyzed to find the possibilities for area minimization. Based on the analysis, critical path of carry is taken into the new logic implementation and the corresponding design of CSKP are proposed for the BTA with AOI, OAI

Modified Level Restorers Using Current Sink and Current Source Inverter Structures for BBL-PT Full Adder

Full adder is an essential component for the design and development of all types of processors like digital signal processors (DSP), microprocessors etc. In most of these systems adder lies in the critical path that affects the overall speed of the system. So enhancing the performance of the 1-bit full adder cell is a significant goal. In this paper, we proposed two modified level restorers using current sink and current source inverter structures for branch-based logic and pass-transistor (BBL-PT) full adder [1]. In BBL-PT full adder, there lies a drawback i.e. voltage step existence that could be eliminated in the proposed logics by using the current sink inverter and current source inverter structures. The proposed full adders are compared with the two standard and well-known logic styles, i.e. conventional static CMOS logic and Complementary Pass transistor Logic (CPL), demonstrated the good delay performance. The implementation of 8-bit ripple carry adder based on proposed full adders are finally demonstrated. The CPL 8-bit RCA and as well as the proposed ones is having better delay performance than the static CMOS and BBL-PT 8-bit RCA. The performance of the proposed BBL-PT cell with current sink & current source inverter structures are examined using PSPICE and the model parameters of a 0.13 µm CMOS process

Adder Based Residue to Binary Number Converters for (2n - 1; 2n; 2n + 1)

Copyright © 2002 IEEEBased on an algorithm derived from the new Chinese remainder theorem I, we present three new residue-to-binary converters for the residue number system (2n-1, 2n, 2n+1) designed using 2n-bit or n-bit adders with improvements on speed, area, or dynamic range compared with various previous converters. The 2n-bit adder based converter is faster and requires about half the hardware required by previous methods. For n-bit adder-based implementations, one new converter is twice as fast as the previous method using a similar amount of hardware, whereas another new converter achieves improvement in either speed, area, or dynamic range compared with previous convertersYuke Wang, Xiaoyu Song, Mostapha Aboulhamid and Hong She

Latency Optimized Asynchronous Early Output Ripple Carry Adder based on Delay-Insensitive Dual-Rail Data Encoding

Asynchronous circuits employing delay-insensitive codes for data representation i.e. encoding and following a 4-phase return-to-zero protocol for handshaking are generally robust. Depending upon whether a single delay-insensitive code or multiple delay-insensitive code(s) are used for data encoding, the encoding scheme is called homogeneous or heterogeneous delay-insensitive data encoding. This article proposes a new latency optimized early output asynchronous ripple carry adder (RCA) that utilizes single-bit asynchronous full adders (SAFAs) and dual-bit asynchronous full adders (DAFAs) which incorporate redundant logic and are based on the delay-insensitive dual-rail code i.e. homogeneous data encoding, and follow a 4-phase return-to-zero handshaking. Amongst various RCA, carry lookahead adder (CLA), and carry select adder (CSLA) designs, which are based on homogeneous or heterogeneous delay-insensitive data encodings which correspond to the weak-indication or the early output timing model, the proposed early output asynchronous RCA that incorporates SAFAs and DAFAs with redundant logic is found to result in reduced latency for a dual-operand addition operation. In particular, for a 32-bit asynchronous RCA, utilizing 15 stages of DAFAs and 2 stages of SAFAs leads to reduced latency. The theoretical worst-case latencies of the different asynchronous adders were calculated by taking into account the typical gate delays of a 32/28nm CMOS digital cell library, and a comparison is made with their practical worst-case latencies estimated. The theoretical and practical worst-case latencies show a close correlation....Comment: arXiv admin note: text overlap with arXiv:1704.0761