Packet aggregation for voice over internet protocol on wireless mesh networks

>Magister Scientiae - MScThis thesis validates that packet aggregation is a viable technique to increase call ca-pacity for Voice over Internet Protocol over wireless mesh networks. Wireless mesh networks are attractive ways to provide voice services to rural communities. Due to the ad-hoc routing nature of mesh networks, packet loss and delay can reduce voice quality.Even on non-mesh networks, voice quality is reduced by high overhead, associated with the transmission of multiple small packets. Packet aggregation techniques are proven to increase VoIP performance and thus can be deployed in wireless mesh networks. Kernel level packet aggregation was initially implemented and tested on a small mesh network of PCs running Linux, and standard baseline vs. aggregation tests were conducted with a realistic voice tra c pro le in hop-to-hop mode. Modi cations of the kernel were then transferred to either end of a nine node 'mesh potato' network and those tests were conducted with only the end nodes modi ed to perform aggregation duties. Packet ag- gregation increased call capacity expectedly, while quality of service was maintained in both instances, and hop-to-hop aggregation outperformed the end-to-end con guration. However, implementing hop-to-hop in a scalable fashion is prohibitive, due to the extensive kernel level debugging that must be done to achieve the call capacity increase.Therefore, end-to-end call capacity increase is an acceptable compromise for eventual scalable deployment of voice over wireless mesh networks

Cross-layer design of multi-hop wireless networks

MULTI -hop wireless networks are usually defined as a collection of nodes equipped with radio transmitters, which not only have the capability to communicate each other in a multi-hop fashion, but also to route each others’ data packets. The distributed nature of such networks makes them suitable for a variety of applications where there are no assumed reliable central entities, or controllers, and may significantly improve the scalability issues of conventional single-hop wireless networks. This Ph.D. dissertation mainly investigates two aspects of the research issues related to the efficient multi-hop wireless networks design, namely: (a) network protocols and (b) network management, both in cross-layer design paradigms to ensure the notion of service quality, such as quality of service (QoS) in wireless mesh networks (WMNs) for backhaul applications and quality of information (QoI) in wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of this Ph.D. dissertation, different network settings are used as illustrative examples, however the proposed algorithms, methodologies, protocols, and models are not restricted in the considered networks, but rather have wide applicability. First, this dissertation proposes a cross-layer design framework integrating a distributed proportional-fair scheduler and a QoS routing algorithm, while using WMNs as an illustrative example. The proposed approach has significant performance gain compared with other network protocols. Second, this dissertation proposes a generic admission control methodology for any packet network, wired and wireless, by modeling the network as a black box, and using a generic mathematical 0. Abstract 3 function and Taylor expansion to capture the admission impact. Third, this dissertation further enhances the previous designs by proposing a negotiation process, to bridge the applications’ service quality demands and the resource management, while using WSNs as an illustrative example. This approach allows the negotiation among different service classes and WSN resource allocations to reach the optimal operational status. Finally, the guarantees of the service quality are extended to the environment of multiple, disconnected, mobile subnetworks, where the question of how to maintain communications using dynamically controlled, unmanned data ferries is investigated

Adaptive intelligent middleware architecture for mobile real-time communications

Provision of instantaneous, mobile and dependable communications in military and safety-critical scenarios must overcome certain wireless network issues: lack of reliable existing infrastructure, immutability of mission-critical protocols and detrimental wireless dynamics with contributing factors including hidden transmitters and fading channels. Benchmarked approaches do not fully meet these challenges, due to reliance on addressing Quality of Service (QoS) at a layer-specific level rather than taking a system of systems approach. This paper presents an adaptive middleware methodology to provide timely MANET communications through predictive selection and dynamic contention reduction, without invasive protocol modification. This is done using ROAM, the proposed, novel Real-time Optimised Ad hoc Middleware based architecture. Extensive simulation results demonstrate the adaptability and scalability of the architecture as well as capability to bound maximum delay, jitter and packet loss in complex and dynamic MANETs

Traffic engineering multi-layer optimization for wireless mesh network transmission a campus network routing protocol transmission performance inhancement

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel UniversityThe wireless mesh network is a potential network for the future due to its excellent inherent characteristic for dynamic self-healing, self-configuration and self-organization. It also has the advantage of easy interoperability networking and the ability to form multi-linked ad-hoc networks. It has a decentralized topology, is cheap and highly scalable. Furthermore, its ease in deployment and easy maintenance are other inherent networking qualities. These aforementioned qualities of the wireless mesh network bring advantages to transmission capability of heterogeneous networks. However, transmissions in wireless mesh network create comparative performance based challenges such as congestion, load-balancing, scalability over increasing networks and coverage capacity. Consequently, these challenges and problems in the routing and switching of packets in the wireless mesh network routing protocols led to a proposal on the resolution of these failures with a combination algorithm and a management based security for the network and its transmitted packets. There are equally contentious services like reliability of the network and quality of service for real-time multimedia traffic flows with other challenges such as path computation and selection in the wireless mesh network. This thesis is therefore a cumulative proposal to the resolution of the outlined challenges and open research areas posed by using wireless mesh network routing protocol. It advances the resolution of these challenges in the mesh environment using a hybrid optimization – traffic engineering, to increase the effectiveness and the reliability of the network. It also proffers a cumulative resolution of the diverse contributions on wireless mesh network routing protocol and transmission. Adaptation and optimization are carried out on the wireless mesh network designed network using traffic engineering mechanism and technique. The research examines the patterns of mesh packet transmission and evaluates the challenges and failures in the mesh network packet transmission. It develops a solution based algorithm for resolutions and proposes the traffic engineering based solution.. These resultant performances and analysis are usually tested and compared over wireless mesh IEEE802.11n or other older proposed documented solution. This thesis used a carefully designed campus mesh network to show a comparative evaluation of an optimal performance of the mesh nodes and routers over a normal IEE802.11n based wireless domain network to show differentiation by optimization using the created algorithms. Furthermore, the indexes of performance being the metric are used to measure the utility and the reliability, including capacity and throughput at the destination during traffic engineered transmission. In addition, the security of these transmitted data and packets are optimized under a traffic engineered technique. Finally, this thesis offers an understanding to the security contribution using traffic engineering resolution to create a management algorithm for processing and computation of the wireless mesh networks security needs. The results of this thesis confirmed, completed and extended the existing predictions with real measurement

A novel approach to quality-of-service provisioning in trusted relay Quantum Key Distribution networks

In recent years, noticeable progress has been made in the development of quantum equipment, reflected through the number of successful demonstrations of Quantum Key Distribution (QKD) technology. Although they showcase the great achievements of QKD, many practical difficulties still need to be resolved. Inspired by the significant similarity between mobile ad-hoc networks and QKD technology, we propose a novel quality of service (QoS) model including new metrics for determining the states of public and quantum channels as well as a comprehensive metric of the QKD link. We also propose a novel routing protocol to achieve high-level scalability and minimize consumption of cryptographic keys. Given the limited mobility of nodes in QKD networks, our routing protocol uses the geographical distance and calculated link states to determine the optimal route. It also benefits from a caching mechanism and detection of returning loops to provide effective forwarding while minimizing key consumption and achieving the desired utilization of network links. Simulation results are presented to demonstrate the validity and accuracy of the proposed solutions.Web of Science28118116

A cross-layer middleware architecture for time and safety critical applications in MANETs

Mobile Ad hoc Networks (MANETs) can be deployed instantaneously and adaptively, making them highly suitable to military, medical and disaster-response scenarios. Using real-time applications for provision of instantaneous and dependable communications, media streaming, and device control in these scenarios is a growing research field. Realising timing requirements in packet delivery is essential to safety-critical real-time applications that are both delay- and loss-sensitive. Safety of these applications is compromised by packet loss, both on the network and by the applications themselves that will drop packets exceeding delay bounds. However, the provision of this required Quality of Service (QoS) must overcome issues relating to the lack of reliable existing infrastructure, conservation of safety-certified functionality. It must also overcome issues relating to the layer-2 dynamics with causal factors including hidden transmitters and fading channels. This thesis proposes that bounded maximum delay and safety-critical application support can be achieved by using cross-layer middleware. Such an approach benefits from the use of established protocols without requiring modifications to safety-certified ones. This research proposes ROAM: a novel, adaptive and scalable cross-layer Real-time Optimising Ad hoc Middleware framework for the provision and maintenance of performance guarantees in self-configuring MANETs. The ROAM framework is designed to be scalable to new optimisers and MANET protocols and requires no modifications of protocol functionality. Four original contributions are proposed: (1) ROAM, a middleware entity abstracts information from the protocol stack using application programming interfaces (APIs) and that implements optimisers to monitor and autonomously tune conditions at protocol layers in response to dynamic network conditions. The cross-layer approach is MANET protocol generic, using minimal imposition on the protocol stack, without protocol modification requirements. (2) A horizontal handoff optimiser that responds to time-varying link quality to ensure optimal and most robust channel usage. (3) A distributed contention reduction optimiser that reduces channel contention and related delay, in response to detection of the presence of a hidden transmitter. (4) A feasibility evaluation of the ROAM architecture to bound maximum delay and jitter in a comprehensive range of ns2-MIRACLE simulation scenarios that demonstrate independence from the key causes of network dynamics: application setting and MANET configuration; including mobility or topology. Experimental results show that ROAM can constrain end-to-end delay, jitter and packet loss, to support real-time applications with critical timing requirements

Improving quality of service through road side back-bone network in VANET

The vehicular ad hoc Networks (VANETs) are expected to support a large spectrum of traffic alert, dynamic route planning, file sharing, safety and infotainment applications to improve traffic management. User satisfaction plus in time delivery of real-time messages is the most significant quality evaluation criterion for vehicular applications. High mobility and rapidly changing topologies always lead to intermittent quality of services, higher delay and packet dropping issues in network. To improve the quality of services for multi-hop and dynamic environment, different types of solutions have been proposed. The article introduces multi-protocol label switching based on roadside backbone network to provide widespread, scalable, high-speed, robust quality of services and improve network efficiency. The simulation results showed that proposed model improves data transmission and routing performance in terms of data delivery, throughput, end-to-end delay and achieve adequate utilization of resources