On the Edge of Secure Connectivity via Software-Defined Networking

Securing communication in computer networks has been an essential feature ever since the Internet, as we know it today, was started. One of the best known and most common methods for secure communication is to use a Virtual Private Network (VPN) solution, mainly operating with an IP security (IPsec) protocol suite originally published in 1995 (RFC1825). It is clear that the Internet, and networks in general, have changed dramatically since then. In particular, the onset of the Cloud and the Internet-of-Things (IoT) have placed new demands on secure networking. Even though the IPsec suite has been updated over the years, it is starting to reach the limits of its capabilities in its present form. Recent advances in networking have thrown up Software-Defined Networking (SDN), which decouples the control and data planes, and thus centralizes the network control. SDN provides arbitrary network topologies and elastic packet forwarding that have enabled useful innovations at the network level. This thesis studies SDN-powered VPN networking and explains the benefits of this combination. Even though the main context is the Cloud, the approaches described here are also valid for non-Cloud operation and are thus suitable for a variety of other use cases for both SMEs and large corporations. In addition to IPsec, open source TLS-based VPN (e.g. OpenVPN) solutions are often used to establish secure tunnels. Research shows that a full-mesh VPN network between multiple sites can be provided using OpenVPN and it can be utilized by SDN to create a seamless, resilient layer-2 overlay for multiple purposes, including the Cloud. However, such a VPN tunnel suffers from resiliency problems and cannot meet the increasing availability requirements. The network setup proposed here is similar to Software-Defined WAN (SD-WAN) solutions and is extremely useful for applications with strict requirements for resiliency and security, even if best-effort ISP is used. IPsec is still preferred over OpenVPN for some use cases, especially by smaller enterprises. Therefore, this research also examines the possibilities for high availability, load balancing, and faster operational speeds for IPsec. We present a novel approach involving the separation of the Internet Key Exchange (IKE) and the Encapsulation Security Payload (ESP) in SDN fashion to operate from separate devices. This allows central management for the IKE while several separate ESP devices can concentrate on the heavy processing. Initially, our research relied on software solutions for ESP processing. Despite the ingenuity of the architectural concept, and although it provided high availability and good load balancing, there was no anti-replay protection. Since anti-replay protection is vital for secure communication, another approach was required. It thus became clear that the ideal solution for such large IPsec tunneling would be to have a pool of fast ESP devices, but to confine the IKE operation to a single centralized device. This would obviate the need for load balancing but still allow high availability via the device pool. The focus of this research thus turned to the study of pure hardware solutions on an FPGA, and their feasibility and production readiness for application in the Cloud context. Our research shows that FPGA works fluently in an SDN network as a standalone IPsec accelerator for ESP packets. The proposed architecture has 10 Gbps throughput, yet the latency is less than 10 µs, meaning that this architecture is especially efficient for data center use and offers increased performance and latency requirements. The high demands of the network packet processing can be met using several different approaches, so this approach is not just limited to the topics presented in this thesis. Global network traffic is growing all the time, so the development of more efficient methods and devices is inevitable. The increasing number of IoT devices will result in a lot of network traffic utilising the Cloud infrastructures in the near future. Based on the latest research, once SDN and hardware acceleration have become fully integrated into the Cloud, the future for secure networking looks promising. SDN technology will open up a wide range of new possibilities for data forwarding, while hardware acceleration will satisfy the increased performance requirements. Although it still remains to be seen whether SDN can answer all the requirements for performance, high availability and resiliency, this thesis shows that it is a very competent technology, even though we have explored only a minor fraction of its capabilities

Hardware Acceleration of Network Intrusion Detection System Using FPGA

This thesis presents new algorithms and hardware designs for Signature-based Network Intrusion Detection System (SB-NIDS) optimisation exploiting a hybrid hardwaresoftware co-designed embedded processing platform. The work describe concentrates on optimisation of a complete SB-NIDS Snort application software on a FPGA based hardware-software target rather than on the implementation of a single functional unit for hardware acceleration. Pattern Matching Hardware Accelerator (PMHA) based on Bloom filter was designed to optimise SB-NIDS performance for execution on a Xilinx MicroBlaze soft-core processor. The Bloom filter approach enables the potentially large number of network intrusion attack patterns to be efficiently represented and searched primarily using accesses to FPGA on-chip memory. The thesis demonstrates, the viability of hybrid hardware-software co-designed approach for SB-NIDS. Future work is required to investigate the effects of later generation FPGA technology and multi-core processors in order to clearly prove the benefits over conventional processor platforms for SB-NIDS. The strengths and weaknesses of the hardware accelerators and algorithms are analysed, and experimental results are examined to determine the effectiveness of the implementation. Experimental results confirm that the PMHA is capable of performing network packet analysis for gigabit rate network traffic. Experimental test results indicate that our SB-NIDS prototype implementation on relatively low clock rate embedded processing platform performance is approximately 1.7 times better than Snort executing on a general purpose processor on PC when comparing processor cycles rather than wall clock time

Securing the Internet with digital signatures

The security and reliability of the Internet are essential for many functions of a modern society. Currently, the Internet lacks efficient network level security solutions and is vulnerable to various attacks, especially to distributed denial-of-service attacks. Traditional end-to-end security solutions such as IPSec only protect the communication end-points and are not effective if the underlying network infrastructure is attacked and paralyzed. This thesis describes and evaluates Packet Level Authentication (PLA), which is a novel method to secure the network infrastructure and provide availability with public key digital signatures. PLA allows any node in the network to verify independently the authenticity and integrity of every received packet, without previously established relationships with the sender or intermediate nodes that have handled the packet. As a result, various attacks against the network and its users can be more easily detected and mitigated, before they can cause significant damage or disturbance. PLA is compatible with the existing Internet infrastructure, and can be used with complementary end-to-end security solutions, such as IPSec and HIP. While PLA was originally designed for securing current IP networks, it is also suitable for securing future data-oriented networking approaches. PLA has been designed to scale from lightweight wireless devices to Internet core network, which is a challenge since public key cryptography operations are very resource intensive. Nevertheless, this work shows that digital signature algorithms and their hardware implementations developed for PLA are scalable to fast core network routers. Furthermore, the additional energy consumption of cryptographic operations is significantly lower than the energy cost of wireless transmission, making PLA feasible for lightweight wireless devices. Digital signature algorithms used by PLA also offer small key and signature sizes and therefore PLA's bandwidth overhead is relatively low. Strong security mechanisms offered by PLA can also be utilized for various other tasks. This work investigates how PLA can be utilized for controlling incoming connections, secure user authentication and billing, and for providing a strong accountability without an extensive data retention by network service providers

Chiffrement authentifié sur FPGAs de la partie reconfigurable à la partie static

Communication systems need to access, store, manipulate, or communicate sensitive information. Therefore, cryptographic primitives such as hash functions and block ciphers are deployed to provide encryption and authentication. Recently, techniques have been invented to combine encryption and authentication into a single algorithm which is called Authenticated Encryption (AE). Combining these two security services in hardware produces better performance compared to two separated algorithms since authentication and encryption can share a part of the computation. Because of combining the programmability with the performance ofcustom hardware, FPGAs become more common as an implementation target for such algorithms. The first part of this thesis is devoted to efficient and high-speed FPGA-based architectures of AE algorithms, AES-GCM and AEGIS-128, in order to be used in the reconfigurable part of FPGAs to support security services of communication systems. Our focus on the state of the art leads to the introduction of high-speed architectures for slow changing keys applications like Virtual Private Networks (VPNs). Furthermore, we present an efficient method for implementing the GF(2¹²⁸) multiplier, which is responsible for the authentication task in AES-GCM, to support high-speed applications. Additionally, an efficient AEGIS-128is also implemented using only five AES rounds. Our hardware implementations were evaluated using Virtex-5 and Virtex-4 FPGAs. The performance of the presented architectures (Thr./Slices) outperforms the previously reported ones.The second part of the thesis presents techniques for low cost solutions in order to secure the reconfiguration of FPGAs. We present different ranges of low cost implementations of AES-GCM, AES-CCM, and AEGIS-128, which are used in the static part of the FPGA in order to decrypt and authenticate the FPGA bitstream. Presented ASIC architectures were evaluated using 90 and 65 nm technologies and they present better performance compared to the previous work.Les systèmes de communication ont besoin d'accéder, stocker, manipuler, ou de communiquer des informations sensibles. Par conséquent, les primitives cryptographiques tels que les fonctions de hachage et le chiffrement par blocs sont déployés pour fournir le cryptage et l'authentification. Récemment, des techniques ont été inventés pour combiner cryptage et d'authentification en un seul algorithme qui est appelé authentifiés Encryption (AE). La combinaison de ces deux services de sécurité dans le matériel de meilleures performances par rapport aux deux algorithmes séparés puisque l'authentification et le cryptage peuvent partager une partie du calcul. En raison de la combinaison de la programmation de l'exécution de matériel personnalisé, FPGA deviennent plus communs comme cible d'une mise en œuvre de ces algorithmes. La première partie de cette thèse est consacrée aux architectures d'algorithmes AE, AES-GCM et AEGIS-128 à base de FPGA efficaces et à grande vitesse, afin d'être utilisé dans la partie reconfigurable FPGA pour soutenir les services de sécurité des systèmes de communication. Notre focalisation sur l'état de l'art conduit à la mise en place d'architectures à haute vitesse pour les applications lentes touches changeantes comme les réseaux privés virtuels (VPN). En outre, nous présentons un procédé efficace pour mettre en œuvre le GF(2¹²⁸) multiplicateur, qui est responsable de la tâche d'authentification en AES-GCM, pour supporter les applications à grande vitesse. En outre, un système efficace AEGIS-128 est également mis en œuvre en utilisant seulement cinq tours AES. Nos réalisations matérielles ont été évaluées à l'aide Virtex-5 et Virtex-4 FPGA. La performance des architectures présentées (Thr. / Parts) surpasse ceux signalés précédemment. La deuxième partie de la thèse présente des techniques pour des solutions à faible coût afin de garantir la reconfiguration du FPGA. Nous présentons différentes gammes de mises en œuvre à faible coût de AES-GCM, AES-CCM, et AEGIS-128, qui sont utilisés dans la partie statique du FPGA afin de décrypter et authentifier le bitstream FPGA. Architectures ASIC présentées ont été évaluées à l'aide de 90 et 65 technologies nm et présentent de meilleures performances par rapport aux travaux antérieurs

Cryptographic coprocessors for embedded systems

In the field of embedded systems design, coprocessors play an important role as a component to increase performance. Many embedded systems are built around a small General Purpose Processor (GPP). If the GPP cannot meet the performance requirements for a certain operation, a coprocessor can be included in the design. The GPP can then offload the computationally intensive operation to the coprocessor; thus increasing the performance of the overall system. A common application of coprocessors is the acceleration of cryptographic algorithms. The work presented in this thesis discusses coprocessor architectures for various cryptographic algorithms that are found in many cryptographic protocols. Their performance is then analysed on a Field Programmable Gate Array (FPGA) platform. Firstly, the acceleration of Elliptic Curve Cryptography (ECC) algorithms is investigated through the use of instruction set extension of a GPP. The performance of these algorithms in a full hardware implementation is then investigated, and an architecture for the acceleration the ECC based digital signature algorithm is developed. Hash functions are also an important component of a cryptographic system. The FPGA implementation of recent hash function designs from the SHA-3 competition are discussed and a fair comparison methodology for hash functions presented. Many cryptographic protocols involve the generation of random data, for keys or nonces. This requires a True Random Number Generator (TRNG) to be present in the system. Various TRNG designs are discussed and a secure implementation, including post-processing and failure detection, is introduced. Finally, a coprocessor for the acceleration of operations at the protocol level will be discussed, where, a novel aspect of the design is the secure method in which private-key data is handle

Reducing adaptive optics latency using many-core processors

Atmospheric turbulence reduces the achievable resolution of ground based optical telescopes. Adaptive optics systems attempt to mitigate the impact of this turbulence and are required to update their corrections quickly and deterministically (i.e. in realtime). The technological challenges faced by the future extremely large telescopes (ELTs) and their associated instruments are considerable. A simple extrapolation of current systems to the ELT scale is not sufficient. My thesis work consisted in the identification and examination of new many-core technologies for accelerating the adaptive optics real-time control loop. I investigated the Mellanox TILE-Gx36 and the Intel Xeon Phi (5110p). The TILE-Gx36 with 4x10 GbE ports and 36 processing cores is a good candidate for fast computation of the wavefront sensor images. The Intel Xeon Phi with 60 processing cores and high memory bandwidth is particularly well suited for the acceleration of the wavefront reconstruction. Through extensive testing I have shown that the TILE-Gx can provide the performance required for the wavefront processing units of the ELT first light instruments. The Intel Xeon Phi (Knights Corner) while providing good overall performance does not have the required determinism. We believe that the next generation of Xeon Phi (Knights Landing) will provide the necessary determinism and increased performance. In this thesis, we show that by using currently available novel many-core processors it is possible to reach the performance required for ELT instruments

Security Enhanced Applications for Information Systems

Every day, more users access services and electronically transmit information which is usually disseminated over insecure networks and processed by websites and databases, which lack proper security protection mechanisms and tools. This may have an impact on both the users’ trust as well as the reputation of the system’s stakeholders. Designing and implementing security enhanced systems is of vital importance. Therefore, this book aims to present a number of innovative security enhanced applications. It is titled “Security Enhanced Applications for Information Systems” and includes 11 chapters. This book is a quality guide for teaching purposes as well as for young researchers since it presents leading innovative contributions on security enhanced applications on various Information Systems. It involves cases based on the standalone, network and Cloud environments