Smart Sensor Technologies for IoT

The recent development in wireless networks and devices has led to novel services that will utilize wireless communication on a new level. Much effort and resources have been dedicated to establishing new communication networks that will support machine-to-machine communication and the Internet of Things (IoT). In these systems, various smart and sensory devices are deployed and connected, enabling large amounts of data to be streamed. Smart services represent new trends in mobile services, i.e., a completely new spectrum of context-aware, personalized, and intelligent services and applications. A variety of existing services utilize information about the position of the user or mobile device. The position of mobile devices is often achieved using the Global Navigation Satellite System (GNSS) chips that are integrated into all modern mobile devices (smartphones). However, GNSS is not always a reliable source of position estimates due to multipath propagation and signal blockage. Moreover, integrating GNSS chips into all devices might have a negative impact on the battery life of future IoT applications. Therefore, alternative solutions to position estimation should be investigated and implemented in IoT applications. This Special Issue, “Smart Sensor Technologies for IoT” aims to report on some of the recent research efforts on this increasingly important topic. The twelve accepted papers in this issue cover various aspects of Smart Sensor Technologies for IoT

QFSRD: Orthogenesis Evolution based Genetic Algorithm for QoS Fitness Scope aware Route Discovery in Ad hoc Networks

Here in this paper we devised a novel orthogenesis evolution based GA technique for QoS fitness scope aware routing in Mobile Ad hoc Networks. The past decade research towards route discovery strategies for mobile ad hoc networks is continuing with magnitude speed. However, the majority of the routing solutions devised in past are dealing only with the optimality of the data transmission. QoS aware hop level connections in a given rute are not supported with the desired frequency. Hence the QoS aware routing in mobile ad hoc networks is grabbing the attention of many researchers as this domain is on the hot edge of the current research

Mobility-based Routing Overhead Management in Reconfigurable Wireless Ad hoc Networks

Mobility-Based Routing Overhead Management in Reconfigurable Wireless Ad Hoc Networks Routing Overheads are the non-data message packets whose roles are establishment and maintenance of routes for data packets as well as neighbourhood discovery and maintenance. They have to be broadcasted in the network either through flooding or other techniques that can ensure that a path exists before data packets can be sent to various destinations. They can be sent reactively or periodically to neighbours so as to keep nodes updated on their neighbourhoods. While we cannot do without these overhead packets, they occupy much of the limited wireless bandwidth available in wireless networks. In a reconfigurable wireless ad hoc network scenario, these packets have more negative effects, as links need to be confirmed more frequently than in traditional networks mainly because of the unpredictable behaviour of the ad hoc networks. We therefore need suitable algorithms that will manage these overheads so as to allow data packet to have more access to the wireless medium, save node energy for longer life of the network, increased efficiency, and scalability. Various protocols have been suggested in the research area. They mostly address routing overheads for suitability of particular protocols leading to lack of standardisation and inapplicability to other protocol classes. In this dissertation ways of ensuring that the routing overheads are kept low are investigated. The issue is addressed both at node and network levels with a common goal of improving efficiency and performance of ad hoc networks without dedicating ourselves to a particular class of routing protocol. At node level, a method hereby referred to as "link availability forecast", that minimises routing overheads used for maintenance of neighbourhood, is derived. The targeted packets are packets that are broadcasted periodically (e.g. hello messages). The basic idea in this method is collection of mobility parameters from the neighbours and predictions or forecasts of these parameters in future. Using these parameters in simple calculations helps in identifying link availabilities between nodes participating in maintenance of networks backbone. At the network level, various approaches have been suggested. The first approach is the cone flooding method that broadcasts route request messages through a predetermined cone shaped region. This region is determined through computation using last known mobility parameters of the destination. Another approach is what is hereby referred as "destination search reverse zone method". In this method, a node will keep routes to destinations for a long time and use these routes for tracing the destination. The destination will then initiate route search in a reverse manner, whereby the source selects the best route for next delivery. A modification to this method is for the source node to determine the zone of route search and define the boundaries within which the packet should be broadcasted. The later method has been used for simulation purposes. The protocol used for verification of the improvements offered by the schemes was the AODV. The link availability forecast scheme was implemented on the AODV and labelled AODV_LA while the network level implementation was labelled AODV_RO. A combination of the two schemes was labelled AODV_LARO

Prediction and optimization techniques for performance enhancement of vehicular ad-hoc networks

Imperial Users onl

Providing incentive to peer-to-peer applications

Cooperative peer-to-peer applications are designed to share the resources of participating computers for the common good of ail users. However, users do not necessarily have an incentive to donate resources to the system if they can use the system's resources for free. As commonly observed in deployed applications, this situation adversely affects the applications' performance and sometimes even their availability and usability. While traditional resource management is handled by a centralized enforcement entity, adopting similar solution raises new concerns for distributed peer-to-peer systems. This dissertation proposes to solve the incentive problem in peer-to-peer applications by designing fair sharing policies and enforcing these policies in a distributed manner. The feasibility and practicability of this approach is demonstrated through numerous applications, namely archival storage systems, streaming systems, content distribution systems, and anonymous communication systems

Position-Based Multicast for Mobile Ad-hoc Networks

In general, routing protocols for mobile ad-hoc networks (MANETs) can be classified into topology-based protocols and position-based protocols. While for unicast routing many proposals for both classes exist, the existing approaches to multicast routing basically implement topology-based algorithms and only a few of them make use of the geographic positions of the network nodes. These have in common that the sending node has to precalculate the multicast tree over which the packets are distributed and store it in each packet header. This involves two main issues: (a) These approaches are not very flexible with regard to topological changes which abandons the advantages that position-based routing has against topology-based routing, and (b) they do not scale with the number of receivers, since every one of them has to be named in the packet header. This thesis solves these issues and further advances position-based multicast routing. Position-Based Multicast (PBM) enhances the flexibility of position-based multicast routing by following the forwarding principle of position-based unicast routing. It transfers the choice of the next hops in the tree from the sender to the forwarding nodes. Based on the positions of their neighboring nodes, these are able to determine the most suitable next hop(s) at the moment when the packet is being forwarded. The scalability with respect to the number of receiving nodes in a group is solved by Scalable Position-Based Multicast (SPBM). It includes a membership management fulfilling different tasks at once. First, it administers group memberships in order to provide multicast sources with information on whether nodes are subscribed to a specific group. Second, it implements a location service providing the multicast sources with the positions of the subscribed receiver nodes. And third, it geographically aggregates membership data in order to achieve the desired scalability. The group management features two modes of operation: The proactive variant produces a bounded overhead scaling well with the size of the network. The reactive alternative, in contrast, reaches low worst-case join delays but does not limit the overhead. Contention-Based Multicast Forwarding (CBMF) addresses the problems that appear in highly mobile networks induced by outdated position information. Instead of basing forwarding decisions on a perception that may no longer be up to date, the packets are addressed only to the final destination; no explicit next hops are specified. The receiving nodes, which are candidate next hops, then decide by means of contention which of them are the most suitable next hop(s) for a packet. Not only is the decision made based on the most currently available data, but this procedure also saves the regular sending of beacon messages, thus reducing the overhead. The lack of multicast congestion control is another unsolved problem obstructing high-bandwidth data transmission. Sending out more and more packets to a multicast group lets the performance decrease. Backpressure Multicast Congestion Control (BMCC) takes care that the network does not need to handle more packets than it is able to. It achieves this by limiting the packet queues on the intermediate hops. A forwarder may not forward the next packet of a stream before it has noticed---by overhearing the transmission of the next hop---that the previous packet has succeeded. If there is congestion in an area, backpressure is implicitly built up towards the source, which then stops sending out packets until the congestion is released. BMCC takes care that every receiving node will receive packets at the same rate. An alternative mode of operation, BMCC with Backpressure Pruning (BMCC-BP) allows the cutting of congested branches for single packets, permitting a higher rate for uncongested receivers. Besides presenting protocols for multicast communication in MANETs, this thesis also describes implementations of two of the above-mentioned protocols. The first one is an implementation of SPBM for the Linux kernel that allows IP applications to send data via UDP to a group of receivers in an ad-hoc network. The implementation resides between the MAC layer and the network/IP layer of the network stack. It is compatible with unmodified standard kernels of versions 2.4 and 2.6, and may be compiled for x86 or ARM processor architectures. The second implementation is an implementation of CBMF for the ScatterWeb MSB430 sensor nodes. Due to their low-level programmability they allow an integration of the routing protocol with the medium access control. The absence of periodic beacon messages makes the protocol especially suitable for energy-constrained sensor networks. Furthermore, other constraints like limited memory and computational power demand special consideration as well

Routing performance in ad hoc networks.

Thesis (M.Sc.Eng.)-University of Natal, Durban, 2003.An ad hoc network is a multi-hop wireless network in which mobile nodes communicate over a shared wireless channel. The network is formed cooperatively without specific user administration or configuration and is characterised by a distributed network management system and the absence of a wired backbone. Military, law enforcement, and disaster relief operations are often carried out in situations with no pre-existing network infrastructure and can benefit from such networks because base stations, which are single points of failure, are undesirable from a reliability standpoint. The rising popularity of mobile computing has also created a potentially large commercial market for multimedia applications applied over wireless ad hoc networks. This dissertation focuses on the routing aspects of ad hoc networking. The multi-hop routes between nodes constantly change as the mobile nodes migrate. Ad hoc network routing algorithms must therefore adapt to the dynamic and unpredictable topology changes, the random radio propagation conditions and portable power sources. Various routing protocols have been proposed in the literature for ad hoc networks. These protocols together with comparative simulations are discussed and a new protocol based on load balancing and signal quality determination is proposed . and the simulation results are presented. Currently the proposed routing protocols are compared using simulation packages which are often time consuming. This dissertation proposes a mathematical model for evaluating the routing protocols and the resultant end-to-end blocking probabilities. The mathematical model is based on a derivation of the reduced load approximation for analysing networks modelled as loss networks and the evaluation incorporates and adapts models that have been used for the analysis of cellular Code Division Multiple Access (CDMA) systems. While analytical methods of solving blocking probability can potentially generate results orders of magnitude faster than simulation, they are more importantly essential to network sensitivity analysis, design and optimisation