Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays

Massive MIMO (multiple-input multiple-output) is no longer a "wild" or "promising" concept for future cellular networks - in 2018 it became a reality. Base stations (BSs) with 64 fully digital transceiver chains were commercially deployed in several countries, the key ingredients of Massive MIMO have made it into the 5G standard, the signal processing methods required to achieve unprecedented spectral efficiency have been developed, and the limitation due to pilot contamination has been resolved. Even the development of fully digital Massive MIMO arrays for mmWave frequencies - once viewed prohibitively complicated and costly - is well underway. In a few years, Massive MIMO with fully digital transceivers will be a mainstream feature at both sub-6 GHz and mmWave frequencies. In this paper, we explain how the first chapter of the Massive MIMO research saga has come to an end, while the story has just begun. The coming wide-scale deployment of BSs with massive antenna arrays opens the door to a brand new world where spatial processing capabilities are omnipresent. In addition to mobile broadband services, the antennas can be used for other communication applications, such as low-power machine-type or ultra-reliable communications, as well as non-communication applications such as radar, sensing and positioning. We outline five new Massive MIMO related research directions: Extremely large aperture arrays, Holographic Massive MIMO, Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin

Reconfigurable Reflectarrays and Array Lenses for Dynamic Antenna Beam Control: A Review

Advances in reflectarrays and array lenses with electronic beam-forming capabilities are enabling a host of new possibilities for these high-performance, low-cost antenna architectures. This paper reviews enabling technologies and topologies of reconfigurable reflectarray and array lens designs, and surveys a range of experimental implementations and achievements that have been made in this area in recent years. The paper describes the fundamental design approaches employed in realizing reconfigurable designs, and explores advanced capabilities of these nascent architectures, such as multi-band operation, polarization manipulation, frequency agility, and amplification. Finally, the paper concludes by discussing future challenges and possibilities for these antennas.Comment: 16 pages, 12 figure

Experimental Synthetic Aperture Radar with Dynamic Metasurfaces

We investigate the use of a dynamic metasurface as the transmitting antenna for a synthetic aperture radar (SAR) imaging system. The dynamic metasurface consists of a one-dimensional microstrip waveguide with complementary electric resonator (cELC) elements patterned into the upper conductor. Integrated into each of the cELCs are two diodes that can be used to shift each cELC resonance out of band with an applied voltage. The aperture is designed to operate at K band frequencies (17.5 to 20.3 GHz), with a bandwidth of 2.8 GHz. We experimentally demonstrate imaging with a fabricated metasurface aperture using existing SAR modalities, showing image quality comparable to traditional antennas. The agility of this aperture allows it to operate in spotlight and stripmap SAR modes, as well as in a third modality inspired by computational imaging strategies. We describe its operation in detail, demonstrate high-quality imaging in both 2D and 3D, and examine various trade-offs governing the integration of dynamic metasurfaces in future SAR imaging platforms

Reconfigurable L-Band Radar

The reconfigurable L-Band radar is an ongoing development at NASA/GSFC that exploits the capability inherently in phased array radar systems with a state-of-the-art data acquisition and real-time processor in order to enable multi-mode measurement techniques in a single radar architecture. The development leverages on the L-Band Imaging Scatterometer, a radar system designed for the development and testing of new radar techniques; and the custom-built DBSAR processor, a highly reconfigurable, high speed data acquisition and processing system. The radar modes currently implemented include scatterometer, synthetic aperture radar, and altimetry; and plans to add new modes such as radiometry and bi-static GNSS signals are being formulated. This development is aimed at enhancing the radar remote sensing capabilities for airborne and spaceborne applications in support of Earth Science and planetary exploration This paper describes the design of the radar and processor systems, explains the operational modes, and discusses preliminary measurements and future plans

Semantic programming model-based design

For a generic flexible efficient array antenna receiver platform a hierarchical tiled architecture has been proposed, giving a heterogeneous multi-processor system-on-chip (MPSoC), multiple chips on a board (MCoB) and multiple boards in a system (MBiS). A wide range of MPSoCs are predicted to be used in the near future but how to efficiently apply these designs remains an issue. We will advocate a model-based design approach and propose a single semantic (programming) model for representing the specification, design and implementation and allowing for verification, simulation, architecture definition and design space exploration.\ud \ud A single model for specification, (formal or functional) verification, simulation and programming an MPSoC has obvious as well as some less obvious advantages. It allows for model-based design down to the implementation, especially for hierarchical MPSoC architectures. Partitioning and mapping of the functionality to an architecture is commonly done manually. Using the proposed approach the feasibility of (partly) automated design space exploration is discussed for determining either a partitioning and mapping for a given architecture or an optimal architecture based on set constraints.\ud \ud The proposed hierarchical tiled architecture provides a flexible reconfigurable solution, however partitioning, mapping, modeling and programming such systems remains an issue. The proposed approach tackles these problems at a higher conceptual level, thereby exploiting the inherent composability and parallelism available in the formalism. Design space explorations is facilitated by allowing transformations between different partitionings and mappings. However, the generic applicability and limitations of this approach will need to be researched further.\ud \u

Towards effective modeling and programming multi-core tiled reconfigurable architectures

For a generic flexible efficient array antenna receiver platform a hierarchical reconfigurable tiled architecture has been proposed. The architecture provides a flexible reconfigurable solution, but partitioning, mapping, modeling and programming such systems remains an issue. We will advocate a model-based design approach and propose a single semantic (programming) model for representing the specification, design and implementation. This approach tackles these problems at a higher conceptual level, thereby exploiting the inherent composability and parallelism available in the formalism. A case study illustrates the use of the semantic model with examples from analogue/digital co-design and hardware/software co-design

3D BEAMSTEERING LOW COMPLEXITY RECONFIGURABLE MULTILEVEL ANTENNA

The main idea of the thesis is to develop a new reconfigurable antenna that makes beamsteering in 3D, with the minimum number of possible switches (maximum 9) and as simple as possible for use in a car vehicle. The design will explore an active dipole located in the center of the antenna (which is fed by a tapered balun), and 4 parasitic dipoles around, placed so that the steering can be done in 9 3D directions according to which parasites we activate by means of switches. The basic idea is to study the physical principle of double reflection, the first reflection due toBeamforming, in its many variants, is a key spatial processing technique to improve user throughput, system capacity, system coverage as well as reducing interference. Simple architectures enabling beamforming either in predefined or arbitrary directions are very desirable for the Fifth Generation of Mobile Communications (5G) to boost power efficiency. Furthermore, it is expected that the number of 5G mobile subscribers grows from 5 million in 2019 to nearly 600 million by 2023, increasing traffic, connections density, and latency which will increase the demand of capacity to the network. Therefore, a broadband intelligent antenna must be at the basis to provide reliable data service, capable to adapt the antenna's capabilities to environment changes. The scope of this thesis focuses on a novel multilevel reconfigurable antenna incorporating beamsteering capabilities by using the lowest number of switches possible

Beampattern Design for Transmit Architectures Based on Reconfigurable Intelligent Surfaces

In this work, we consider a transmit architecture where few active antennas (sources), each equipped with a dedicated radio frequency chain, illuminate a reconfigurable intelligent surface (RIS) that control the beam-steering capability of the whole system. In this framework, we tackle the beampattern design problem, where the waveform emitted by the sources and the phase shifts introduced by the RIS are designed so that the realized beampattern matches, in a least-square sense, the desired one. The design of this architecture can be useful in many areas, such as radar detection and tracking, millimeter wave, sub-THz, and THz communications, and integrated sensing and communications. We provide a sub-optimum solution to the beampattern design problem, and we report an example to show that this RIS-based transmit architecture can be competitive with respect to fully-digital MIMO systems, especially if constant-modulus waveforms are required.Comment: Submitted for possible publication to IEEE Transactions on Signal Processin